diff options
| -rw-r--r-- | CMakeLists.txt | 80 | ||||
| -rw-r--r-- | ConfigureChecks.cmake | 59 | ||||
| -rw-r--r-- | INSTALL | 373 | ||||
| -rw-r--r-- | README.md | 18 | ||||
| -rw-r--r-- | config.h.cmake | 8 | ||||
| -rw-r--r-- | po/Makefile.in | 217 | ||||
| -rw-r--r-- | rc/CMakeLists.txt | 7 | ||||
| -rw-r--r-- | tdegtk/CMakeLists.txt | 69 | ||||
| -rw-r--r-- | tdegtk/tdegtk-draw.cpp | 2 | ||||
| -rw-r--r-- | tdegtk/tdegtk-tabwidgetdata.h | 2 | ||||
| -rw-r--r-- | tdegtk/tdegtk-theme.cpp | 23 | ||||
| -rw-r--r-- | tests/CMakeLists.txt | 47 |
12 files changed, 318 insertions, 587 deletions
diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..dcc046c --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,80 @@ +############################################ +# # +# Improvements and feedbacks are welcome # +# # +# This file is released under GPL >= 3 # +# # +############################################ + + +cmake_minimum_required( VERSION 3.1 ) + + +#### general package setup + +project( gtk3-tqt-engine ) + + +#### include essential cmake modules + +include( FindPkgConfig ) +include( CheckFunctionExists ) +include( CheckSymbolExists ) +include( CheckIncludeFile ) +include( CheckLibraryExists ) +include( CheckCSourceCompiles ) +include( CheckCXXSourceCompiles ) + +#### include our cmake modules + +include( TDEMacros ) +enable_testing( ) + + +##### set version number ######################## + +tde_set_project_version( ) + + +##### setup install paths + +include( TDESetupPaths ) +tde_setup_paths( ) + + +##### optional stuff + +option( WITH_ALL_OPTIONS "Enable all optional support" OFF ) +option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} ) + + +##### user requested modules + +option( BUILD_ALL "Build all" ON ) +option( BUILD_TESTS "Build test programs" ${BUILD_ALL} ) + + +##### configure checks + +include( ConfigureChecks.cmake ) + + +###### global compiler settings + +add_definitions( -DHAVE_CONFIG_H ) + +set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TQT_CXX_FLAGS}" ) +set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--no-undefined" ) +set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined" ) + + +##### directories + +add_subdirectory( rc ) +add_subdirectory( tdegtk ) +tde_conditional_add_subdirectory( BUILD_TESTS tests ) + + +##### write configure files + +configure_file( config.h.cmake config.h @ONLY ) diff --git a/ConfigureChecks.cmake b/ConfigureChecks.cmake new file mode 100644 index 0000000..483464f --- /dev/null +++ b/ConfigureChecks.cmake @@ -0,0 +1,59 @@ +########################################### +# # +# Improvements and feedback are welcome # +# # +# This file is released under GPL >= 3 # +# # +########################################### + +# required stuff +find_package( TQt ) +find_package( TDE ) + +tde_setup_architecture_flags( ) + +include(TestBigEndian) +test_big_endian(WORDS_BIGENDIAN) + +tde_setup_largefiles( ) + + +##### check for gcc visibility support + +if( WITH_GCC_VISIBILITY ) + tde_setup_gcc_visibility( ) +endif( WITH_GCC_VISIBILITY ) + + +#### cairo + +pkg_search_module( CAIRO cairo ) + +if( NOT CAIRO_FOUND ) + tde_message_fatal( "cairo is required but was not found on your system" ) +endif( ) + + +#### gtk+-3.0 + +pkg_search_module( GTK3 gtk+-3.0 ) + +if( NOT GTK3_FOUND ) + tde_message_fatal( "gtk3 is required but was not found on your system" ) +endif( ) + +execute_process( + COMMAND ${PKG_CONFIG_EXECUTABLE} + gtk+-3.0 --variable=gtk_binary_version + OUTPUT_VARIABLE GTK3_BIN_VERSION + OUTPUT_STRIP_TRAILING_WHITESPACE +) + + +#### pango + +pkg_search_module( PANGO pango ) + +if( NOT PANGO_FOUND ) + tde_message_fatal( "pango is required but was not found on your system" ) +endif( ) @@ -1,365 +1,24 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008, 2009 Free Software Foundation, Inc. - - Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. This file is offered as-is, -without warranty of any kind. - Basic Installation ================== - Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. Some packages provide this -`INSTALL' file but do not implement all of the features documented -below. The lack of an optional feature in a given package is not -necessarily a bug. More recommendations for GNU packages can be found -in *note Makefile Conventions: (standards)Makefile Conventions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - - The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package, generally using the just-built uninstalled binaries. - - 4. Type `make install' to install the programs and any data files and - documentation. When installing into a prefix owned by root, it is - recommended that the package be configured and built as a regular - user, and only the `make install' phase executed with root - privileges. - - 5. Optionally, type `make installcheck' to repeat any self-tests, but - this time using the binaries in their final installed location. - This target does not install anything. Running this target as a - regular user, particularly if the prior `make install' required - root privileges, verifies that the installation completed - correctly. - - 6. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 7. Often, you can also type `make uninstall' to remove the installed - files again. In practice, not all packages have tested that - uninstallation works correctly, even though it is required by the - GNU Coding Standards. - - 8. Some packages, particularly those that use Automake, provide `make - distcheck', which can by used by developers to test that all other - targets like `make install' and `make uninstall' work correctly. - This target is generally not run by end users. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. This -is known as a "VPATH" build. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - - On MacOS X 10.5 and later systems, you can create libraries and -executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple `-arch' options to the -compiler but only a single `-arch' option to the preprocessor. Like -this: - - ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CPP="gcc -E" CXXCPP="g++ -E" - - This is not guaranteed to produce working output in all cases, you -may have to build one architecture at a time and combine the results -using the `lipo' tool if you have problems. - -Installation Names -================== - - By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX', where PREFIX must be an -absolute file name. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the -default for these options is expressed in terms of `${prefix}', so that -specifying just `--prefix' will affect all of the other directory -specifications that were not explicitly provided. - - The most portable way to affect installation locations is to pass the -correct locations to `configure'; however, many packages provide one or -both of the following shortcuts of passing variable assignments to the -`make install' command line to change installation locations without -having to reconfigure or recompile. - - The first method involves providing an override variable for each -affected directory. For example, `make install -prefix=/alternate/directory' will choose an alternate location for all -directory configuration variables that were expressed in terms of -`${prefix}'. Any directories that were specified during `configure', -but not in terms of `${prefix}', must each be overridden at install -time for the entire installation to be relocated. The approach of -makefile variable overrides for each directory variable is required by -the GNU Coding Standards, and ideally causes no recompilation. -However, some platforms have known limitations with the semantics of -shared libraries that end up requiring recompilation when using this -method, particularly noticeable in packages that use GNU Libtool. - - The second method involves providing the `DESTDIR' variable. For -example, `make install DESTDIR=/alternate/directory' will prepend -`/alternate/directory' before all installation names. The approach of -`DESTDIR' overrides is not required by the GNU Coding Standards, and -does not work on platforms that have drive letters. On the other hand, -it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of `${prefix}' -at `configure' time. - -Optional Features -================= - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - - Some packages offer the ability to configure how verbose the -execution of `make' will be. For these packages, running `./configure ---enable-silent-rules' sets the default to minimal output, which can be -overridden with `make V=1'; while running `./configure ---disable-silent-rules' sets the default to verbose, which can be -overridden with `make V=0'. - -Particular systems -================== - - On HP-UX, the default C compiler is not ANSI C compatible. If GNU -CC is not installed, it is recommended to use the following options in -order to use an ANSI C compiler: - - ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" - -and if that doesn't work, install pre-built binaries of GCC for HP-UX. - - On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its `<wchar.h>' header file. The option `-nodtk' can be used as -a workaround. If GNU CC is not installed, it is therefore recommended -to try - - ./configure CC="cc" - -and if that doesn't work, try - - ./configure CC="cc -nodtk" - - On Solaris, don't put `/usr/ucb' early in your `PATH'. This -directory contains several dysfunctional programs; working variants of -these programs are available in `/usr/bin'. So, if you need `/usr/ucb' -in your `PATH', put it _after_ `/usr/bin'. - - On Haiku, software installed for all users goes in `/boot/common', -not `/usr/local'. It is recommended to use the following options: - - ./configure --prefix=/boot/common - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS - KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of all of the options to `configure', and exit. - -`--help=short' -`--help=recursive' - Print a summary of the options unique to this package's - `configure', and exit. The `short' variant lists options used - only in the top level, while the `recursive' variant lists options - also present in any nested packages. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). +gtk3-tqt-engine relies on cmake to build. -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. +Here are suggested default options: -`--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: - for more details, including other options available for fine-tuning - the installation locations. + -DCMAKE_INSTALL_PREFIX="/opt/trinity" \ + -DCONFIG_INSTALL_DIR="/etc/trinity" \ + -DSYSCONF_INSTALL_DIR="/etc/trinity" \ + -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \ + -DCMAKE_BUILD_TYPE=RelWithDebInfo \ + -DCMAKE_VERBOSE_MAKEFILE="ON" \ + -DCMAKE_SKIP_RPATH="OFF" \ + -DBUILD_ALL="ON" \ + -DWITH_ALL_OPTIONS="ON" -`--no-create' -`-n' - Run the configure checks, but stop before creating any output - files. -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. +Requirements: +============= +- cairo +- gtk+-3.0 +- pango diff --git a/README.md b/README.md new file mode 100644 index 0000000..8277b6d --- /dev/null +++ b/README.md @@ -0,0 +1,18 @@ + +GTK3-tqt-engine - GTK3 theme engine for TDE + + +GTK3 style engine which uses the active TDE style to draw its widgets. + +. + +Contributing +-------------- + +If you wish to contribute to gtk3-tqt-engine, you might do so: + +- TDE Gitea Workspace (TGW) collaboration tool. + https://mirror.git.trinitydesktop.org/gitea + +- TDE Weblate Translation Workspace (TWTW) collaboration tool. + https://mirror.git.trinitydesktop.org/weblate diff --git a/config.h.cmake b/config.h.cmake new file mode 100644 index 0000000..61ede3a --- /dev/null +++ b/config.h.cmake @@ -0,0 +1,8 @@ +#define VERSION "@VERSION@" + +// Defined if you have fvisibility and fvisibility-inlines-hidden support. +#cmakedefine __KDE_HAVE_GCC_VISIBILITY 1 + +/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most + significant byte first (like Motorola and SPARC, unlike Intel). */ +#cmakedefine WORDS_BIGENDIAN @WORDS_BIGENDIAN@ diff --git a/po/Makefile.in b/po/Makefile.in deleted file mode 100644 index cc8a222..0000000 --- a/po/Makefile.in +++ /dev/null @@ -1,217 +0,0 @@ -# Makefile for program source directory in GNU NLS utilities package. -# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu> -# Copyright (C) 2004-2008 Rodney Dawes <dobey.pwns@gmail.com> -# -# This file may be copied and used freely without restrictions. It may -# be used in projects which are not available under a GNU Public License, -# but which still want to provide support for the GNU gettext functionality. -# -# - Modified by Owen Taylor <otaylor@redhat.com> to use GETTEXT_PACKAGE -# instead of PACKAGE and to look for po2tbl in ./ not in intl/ -# -# - Modified by jacob berkman <jacob@ximian.com> to install -# Makefile.in.in and po2tbl.sed.in for use with glib-gettextize -# -# - Modified by Rodney Dawes <dobey.pwns@gmail.com> for use with intltool -# -# We have the following line for use by intltoolize: -# INTLTOOL_MAKEFILE - -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = @top_builddir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datadir = @datadir@ -datarootdir = @datarootdir@ -libdir = @libdir@ -DATADIRNAME = @DATADIRNAME@ -itlocaledir = $(prefix)/$(DATADIRNAME)/locale -subdir = po -install_sh = @install_sh@ -# Automake >= 1.8 provides @mkdir_p@. -# Until it can be supposed, use the safe fallback: -mkdir_p = $(install_sh) -d - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -GMSGFMT = @GMSGFMT@ -MSGFMT = @MSGFMT@ -XGETTEXT = @XGETTEXT@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist -GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot - -ALL_LINGUAS = @ALL_LINGUAS@ - -PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) - -USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) - -USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) - -POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) - -DISTFILES = Makefile.in.in POTFILES.in $(POFILES) -EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS - -POTFILES = \ -# This comment gets stripped out - -CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) - -.SUFFIXES: -.SUFFIXES: .po .pox .gmo .mo .msg .cat - -.po.pox: - $(MAKE) $(GETTEXT_PACKAGE).pot - $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox - -.po.mo: - $(MSGFMT) -o $@ $< - -.po.gmo: - file=`echo $* | sed 's,.*/,,'`.gmo \ - && rm -f $$file && $(GMSGFMT) -o $$file $< - -.po.cat: - sed -f ../intl/po2msg.sed < $< > $*.msg \ - && rm -f $@ && gencat $@ $*.msg - - -all: all-@USE_NLS@ - -all-yes: $(CATALOGS) -all-no: - -$(GETTEXT_PACKAGE).pot: $(POTFILES) - $(GENPOT) - -install: install-data -install-data: install-data-@USE_NLS@ -install-data-no: all -install-data-yes: all - linguas="$(USE_LINGUAS)"; \ - for lang in $$linguas; do \ - dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $$dir; \ - if test -r $$lang.gmo; then \ - $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ - echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ - else \ - $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ - echo "installing $(srcdir)/$$lang.gmo as" \ - "$$dir/$(GETTEXT_PACKAGE).mo"; \ - fi; \ - if test -r $$lang.gmo.m; then \ - $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ - echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ - else \ - if test -r $(srcdir)/$$lang.gmo.m ; then \ - $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ - $$dir/$(GETTEXT_PACKAGE).mo.m; \ - echo "installing $(srcdir)/$$lang.gmo.m as" \ - "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ - else \ - true; \ - fi; \ - fi; \ - done - -# Empty stubs to satisfy archaic automake needs -dvi info ctags tags CTAGS TAGS ID: - -# Define this as empty until I found a useful application. -install-exec installcheck: - -uninstall: - linguas="$(USE_LINGUAS)"; \ - for lang in $$linguas; do \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ - done - -check: all $(GETTEXT_PACKAGE).pot - rm -f missing notexist - srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m - if [ -r missing -o -r notexist ]; then \ - exit 1; \ - fi - -mostlyclean: - rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp - rm -f .intltool-merge-cache - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES stamp-it - rm -f *.mo *.msg *.cat *.cat.m *.gmo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f Makefile.in.in - -distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: $(DISTFILES) - dists="$(DISTFILES)"; \ - extra_dists="$(EXTRA_DISTFILES)"; \ - for file in $$extra_dists; do \ - test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ - done; \ - for file in $$dists; do \ - test -f $$file || file="$(srcdir)/$$file"; \ - ln $$file $(distdir) 2> /dev/null \ - || cp -p $$file $(distdir); \ - done - -update-po: Makefile - $(MAKE) $(GETTEXT_PACKAGE).pot - tmpdir=`pwd`; \ - linguas="$(USE_LINGUAS)"; \ - for lang in $$linguas; do \ - echo "$$lang:"; \ - result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ - if $$result; then \ - if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.gmo failed!"; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi; \ - done - -Makefile POTFILES: stamp-it - @if test ! -f $@; then \ - rm -f stamp-it; \ - $(MAKE) stamp-it; \ - fi - -stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ - $(SHELL) ./config.status - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/rc/CMakeLists.txt b/rc/CMakeLists.txt new file mode 100644 index 0000000..d6182ff --- /dev/null +++ b/rc/CMakeLists.txt @@ -0,0 +1,7 @@ + +##### other data + +install( + FILES gtk.css + DESTINATION ${GTK3_PREFIX}/share/themes/tdegtk/gtk-3.0 +) diff --git a/tdegtk/CMakeLists.txt b/tdegtk/CMakeLists.txt new file mode 100644 index 0000000..0737888 --- /dev/null +++ b/tdegtk/CMakeLists.txt @@ -0,0 +1,69 @@ +include_directories( + ${CMAKE_CURRENT_BINARY_DIR} + ${CMAKE_CURRENT_SOURCE_DIR} + ${CMAKE_BINARY_DIR} + ${TDE_INCLUDE_DIR} + ${TQT_INCLUDE_DIRS} + ${CAIRO_INCLUDE_DIRS} + ${GTK3_INCLUDE_DIRS} + ${PANGO_INCLUDE_DIRS} +) + +link_directories( + ${TQT_LIBRARY_DIRS} + ${TDE_LIB_DIR} + ${CAIRO_LIBARY_DIRS} + ${GTK3_LIBRARY_DIRS} + ${PANGO_LIBRARY_DIRS} +) + + +##### tqtcairo (shared) + +tde_add_library( tqtcairo SHARED AUTOMOC + + SOURCES + tqtcairopainter.cpp + + LINK + tdeui-shared + ${GLADE_LIBRARIES} + ${GTK3_LIBRARIES} + + VERSION 0.0.0 + + DESTINATION ${LIB_INSTALL_DIR} +) + + +##### tdegtk (shared) + +tde_add_library( tdegtk SHARED AUTOMOC + + SOURCES + exponential-blur.c + gtkroundedbox.c + tdegtk-cairo-support.c + tdegtk-draw.cpp + tdegtk-engine.c + tdegtk-support.c + tdegtk-hooks.cpp + tdegtk-signals.cpp + tdegtk-widgetlookup.cpp + tdegtk-utils.cpp + tdegtk-tabwidgetdata.cpp + tdegtk-animations.cpp + tdegtk-baseengine.cpp + tdegtk-theme.cpp + + LINK + tdecore-shared + tdeui-shared + tqtcairo-shared + ${GLADE_LIBRARIES} + ${GTK3_LIBRARIES} + + VERSION 0.0.0 + + DESTINATION ${GTK3_LIBDIR}/gtk-3.0/${GTK3_BIN_VERSION}/theming-engines +) diff --git a/tdegtk/tdegtk-draw.cpp b/tdegtk/tdegtk-draw.cpp index 33cd63b..61548e1 100644 --- a/tdegtk/tdegtk-draw.cpp +++ b/tdegtk/tdegtk-draw.cpp @@ -1727,7 +1727,7 @@ tdegtk_draw_common_frame (DRAW_ARGS) state = gtk_theming_engine_get_state(engine); widget = m_widgetLookup.find(cr, path); - TQString widgetPath(Gtk::gtk_widget_path(widget)); + TQString widgetPath(Gtk::gtk_widget_path(widget).c_str()); if (gtk_theming_engine_has_class(engine, GTK_STYLE_CLASS_SCROLLBAR)) { #ifdef DRAW_SCROLLBAR_PIECES_INSTEAD_OF_ENTIRE_BAR diff --git a/tdegtk/tdegtk-tabwidgetdata.h b/tdegtk/tdegtk-tabwidgetdata.h index e7284bf..fb2a243 100644 --- a/tdegtk/tdegtk-tabwidgetdata.h +++ b/tdegtk/tdegtk-tabwidgetdata.h @@ -1,5 +1,5 @@ #ifndef tdegtk_tabwidgetdata_h -#define tdegtk_widgetdata_h +#define tdegtk_tabwidgetdata_h /* * this file was largely taken from the oxygen gtk engine * Copyright (c) 2010 Hugo Pereira Da Costa <hugo@oxygen-icons.org> diff --git a/tdegtk/tdegtk-theme.cpp b/tdegtk/tdegtk-theme.cpp index 842c10d..aa7751e 100644 --- a/tdegtk/tdegtk-theme.cpp +++ b/tdegtk/tdegtk-theme.cpp @@ -48,23 +48,24 @@ bool m_scrollbarBack2 = false; bool m_scrollbarForward2 = false; #include <gmodule.h> +#include <kdemacros.h> extern "C" { #include <gtk/gtk.h> #include "tdegtk-engine.h" - G_MODULE_EXPORT void theme_init(GTypeModule *module); + KDE_EXPORT void theme_init(GTypeModule *module); - G_MODULE_EXPORT void theme_exit(void); + KDE_EXPORT void theme_exit(void); - G_MODULE_EXPORT GtkThemingEngine* create_engine(void); + KDE_EXPORT GtkThemingEngine* create_engine(void); - G_MODULE_EXPORT void theme_init(GTypeModule *module) { + KDE_EXPORT void theme_init(GTypeModule *module) { tdegtk_engine_register_types(module); } - G_MODULE_EXPORT void theme_exit(void) { + KDE_EXPORT void theme_exit(void) { // } } @@ -200,7 +201,7 @@ TQString tdeFindDir(const TQString& suffix, const TQString& file1, const TQStrin } TQString runCommand(const TQString& command) { - FILE* p = popen(command.latin1(), "r"); + FILE* p = popen(command.local8Bit(), "r"); if (p == NULL) { return TQString(); } @@ -344,7 +345,7 @@ GtkIconSet* generateIconSet(const std::string& gtkIconName, const std::string& t // loop over provided path to see if at least one icon is found for (TQStringList::const_iterator pathIter = pathList.begin(); pathIter != pathList.end(); ++pathIter) { - std::string filename((*pathIter + '/' + iconFileStream.str()).latin1()); + std::string filename((*pathIter + '/' + iconFileStream.str().c_str()).local8Bit()); if (!std::ifstream(filename.c_str())) { continue; } @@ -410,7 +411,7 @@ void setColour(TQString name, TQString state, TQColor color, TQString widgetType if (state == ":normal") { state = ""; } - gtk3_tqt_load_resource_string(parse_rc_string(name + ": " + colorString(color), widgetTypes + state).latin1()); + gtk3_tqt_load_resource_string(parse_rc_string(name + ": " + colorString(color), widgetTypes + state).local8Bit()); } static TQStringList iconInheritsDirs(const TQString& icondir) { @@ -756,7 +757,7 @@ void writeGtkThemeControlFile(int forceRecreate) { // This cache matches the current icon theme and style themeFile.close(); - gtk3_tqt_reload_theme_definition_file(themeFilePath.latin1()); + gtk3_tqt_reload_theme_definition_file(themeFilePath.local8Bit()); return; } @@ -766,7 +767,7 @@ void writeGtkThemeControlFile(int forceRecreate) { if (gtk3TQtDebug) { // Load possibly modified theme control file before writing a new one - gtk3_tqt_reload_theme_definition_file(themeFilePath.latin1()); + gtk3_tqt_reload_theme_definition_file(themeFilePath.local8Bit()); } themeFile.open(IO_WriteOnly | IO_Truncate); @@ -1029,7 +1030,7 @@ void writeGtkThemeControlFile(int forceRecreate) { themeFile.close(); if (!gtk3TQtDebug) { - gtk3_tqt_reload_theme_definition_file(themeFilePath.latin1()); + gtk3_tqt_reload_theme_definition_file(themeFilePath.local8Bit()); } } // ========================================================================================================= diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt new file mode 100644 index 0000000..94707cc --- /dev/null +++ b/tests/CMakeLists.txt @@ -0,0 +1,47 @@ +include_directories( + ${CMAKE_CURRENT_BINARY_DIR} + ${CMAKE_CURRENT_SOURCE_DIR} + ${CMAKE_SOURCE_DIR}/tdegtk + ${CMAKE_BINARY_DIR} + ${TDE_INCLUDE_DIR} + ${TQT_INCLUDE_DIRS} + ${CAIRO_INCLUDE_DIRS} + ${GTK3_INCLUDE_DIRS} + ${PANGO_INCLUDE_DIRS} +) + +link_directories( + ${TQT_LIBRARY_DIRS} + ${TDE_LIB_DIR} + ${CAIRO_LIBRARY_DIRS} + ${GTK3_LIBRARY_DIRS} + ${PANGO_LIBRARY_DIRS} +) + + +##### test-widgets (executable) + +tde_add_check_executable( test-widgets AUTOMOC + + SOURCES + test-widgets.c + + LINK + ${CAIRO_LIBRARIES} + ${GTK3_LIBRARIES} +) + + +##### test-painter (executable) + +tde_add_check_executable( test-painter AUTOMOC + + SOURCES + test-painter.cpp + + LINK + tqtcairo-shared + tdeui-shared + ${CAIRO_LIBRARIES} + ${GTK3_LIBRARIES} +) |