summaryrefslogtreecommitdiffstats
path: root/debian/htdig/htdig-3.2.0b6/installdir/htdig.conf
diff options
context:
space:
mode:
Diffstat (limited to 'debian/htdig/htdig-3.2.0b6/installdir/htdig.conf')
-rw-r--r--debian/htdig/htdig-3.2.0b6/installdir/htdig.conf190
1 files changed, 190 insertions, 0 deletions
diff --git a/debian/htdig/htdig-3.2.0b6/installdir/htdig.conf b/debian/htdig/htdig-3.2.0b6/installdir/htdig.conf
new file mode 100644
index 00000000..7b7d8ffc
--- /dev/null
+++ b/debian/htdig/htdig-3.2.0b6/installdir/htdig.conf
@@ -0,0 +1,190 @@
+#
+# Example config file for ht://Dig.
+#
+# This configuration file is used by all the programs that make up ht://Dig.
+# Please refer to the attribute reference manual for more details on what
+# can be put into this file. (http://www.htdig.org/confindex.html)
+# Note that most attributes have very reasonable default values so you
+# really only have to add attributes here if you want to change the defaults.
+#
+# What follows are some of the common attributes you might want to change.
+#
+
+#
+# Specify where the database files need to go. Make sure that there is
+# plenty of free disk space available for the databases. They can get
+# pretty big.
+#
+database_dir: @DATABASE_DIR@
+
+#
+# This specifies the URL where the robot (htdig) will start. You can specify
+# multiple URLs here. Just separate them by some whitespace.
+# The example here will cause the ht://Dig homepage and related pages to be
+# indexed.
+# You could also index all the URLs in a file like so:
+# start_url: `${common_dir}/start.url`
+#
+start_url: http://www.htdig.org/
+
+#
+# This attribute limits the scope of the indexing process. The default is to
+# set it to the same as the start_url above. This way only pages that are on
+# the sites specified in the start_url attribute will be indexed and it will
+# reject any URLs that go outside of those sites.
+#
+# Keep in mind that the value for this attribute is just a list of string
+# patterns. As long as URLs contain at least one of the patterns it will be
+# seen as part of the scope of the index.
+#
+limit_urls_to: ${start_url}
+
+#
+# This attribute is used for compressing the database. The default is to
+# set it to the same as the limit_urls_to above, plus some common endings.
+#
+# Keep in mind that this list should be short. If your start_url is a very
+# long list of URLs, it may be wise to replace it with something like
+# http://www. or comment this out and use the compiled-in default.
+#
+common_url_parts: ${limit_urls_to} .html .htm .shtml
+
+#
+# If there are particular pages that you definitely do NOT want to index, you
+# can use the exclude_urls attribute. The value is a list of string patterns.
+# If a URL matches any of the patterns, it will NOT be indexed. This is
+# useful to exclude things like virtual web trees or database accesses. By
+# default, all CGI URLs will be excluded. (Note that the /cgi-bin/ convention
+# may not work on your web server. Check the path prefix used on your web
+# server.)
+#
+exclude_urls: /cgi-bin/ .cgi
+
+#
+# Since ht://Dig does not (and cannot) parse every document type, this
+# attribute is a list of strings (extensions) that will be ignored during
+# indexing. These are *only* checked at the end of a URL, whereas
+# exclude_url patterns are matched anywhere.
+#
+# Also keep in mind that while other attributes allow regex, these must be
+# actual strings.
+#
+bad_extensions: .wav .gz .z .sit .au .zip .tar .hqx .exe .com .gif \
+ .jpg .jpeg .aiff .class .map .ram .tgz .bin .rpm .mpg .mov .avi .css
+
+#
+# The string htdig will send in every request to identify the robot. Change
+# this to your email address.
+#
+maintainer: unconfigured@htdig.searchengine.maintainer
+
+#
+# The excerpts that are displayed in long results rely on stored information
+# in the index databases. The compiled default only stores 512 characters of
+# text from each document (this excludes any HTML markup...) If you plan on
+# using the excerpts you probably want to make this larger. The only concern
+# here is that more disk space is going to be needed to store the additional
+# information. Since disk space is cheap (! :-)) you might want to set this
+# to a value so that a large percentage of the documents that you are going
+# to be indexing are stored completely in the database. At SDSU we found
+# that by setting this value to about 50k the index would get 97% of all
+# documents completely and only 3% was cut off at 50k. You probably want to
+# experiment with this value.
+# Note that if you want to set this value low, you probably want to set the
+# excerpt_show_top attribute to false so that the top excerpt_length characters
+# of the document are always shown.
+#
+max_head_length: 10000
+
+#
+# To limit network connections, ht://Dig will only pull up to a certain limit
+# of bytes. This prevents the indexing from dying because the server keeps
+# sending information. However, several FAQs happen because people have files
+# bigger than the default limit of 100KB. This sets the default a bit higher.
+# (see <http://www.htdig.org/FAQ.html> for more)
+#
+max_doc_size: 200000
+
+#
+# Most people expect some sort of excerpt in results. By default, if the
+# search words aren't found in context in the stored excerpt, htsearch shows
+# the text defined in the no_excerpt_text attribute:
+# (None of the search words were found in the top of this document.)
+# This attribute instead will show the top of the excerpt.
+#
+no_excerpt_show_top: true
+
+#
+# Depending on your needs, you might want to enable some of the fuzzy search
+# algorithms. There are several to choose from and you can use them in any
+# combination you feel comfortable with. Each algorithm will get a weight
+# assigned to it so that in combinations of algorithms, certain algorithms get
+# preference over others. Note that the weights only affect the ranking of
+# the results, not the actual searching.
+# The available algorithms are:
+# accents
+# exact
+# endings
+# metaphone
+# prefix
+# regex
+# soundex
+# speling [sic]
+# substring
+# synonyms
+# By default only the "exact" algorithm is used with weight 1.
+# Note that if you are going to use the endings, metaphone, soundex, accents,
+# or synonyms algorithms, you will need to run htfuzzy to generate
+# the databases they use.
+#
+search_algorithm: exact:1 synonyms:0.5 endings:0.1
+
+#
+# The following are the templates used in the builtin search results
+# The default is to use compiled versions of these files, which produces
+# slightly faster results. However, uncommenting these lines makes it
+# very easy to change the format of search results.
+# See <http://www.htdig.org/hts_templates.html> for more details.
+#
+# template_map: Long long ${common_dir}/long.html \
+# Short short ${common_dir}/short.html
+# template_name: long
+
+#
+# The following are used to change the text for the page index.
+# The defaults are just boring text numbers. These images spice
+# up the result pages quite a bit. (Feel free to do whatever, though)
+#
+next_page_text: <img src="@IMAGEDIR@/buttonr.gif" border="0" align="middle" width="30" height="30" alt="next">
+no_next_page_text:
+prev_page_text: <img src="@IMAGEDIR@/buttonl.gif" border="0" align="middle" width="30" height="30" alt="prev">
+no_prev_page_text:
+page_number_text: '<img src="@IMAGEDIR@/button1.gif" border="0" align="middle" width="30" height="30" alt="1">' \
+ '<img src="@IMAGEDIR@/button2.gif" border="0" align="middle" width="30" height="30" alt="2">' \
+ '<img src="@IMAGEDIR@/button3.gif" border="0" align="middle" width="30" height="30" alt="3">' \
+ '<img src="@IMAGEDIR@/button4.gif" border="0" align="middle" width="30" height="30" alt="4">' \
+ '<img src="@IMAGEDIR@/button5.gif" border="0" align="middle" width="30" height="30" alt="5">' \
+ '<img src="@IMAGEDIR@/button6.gif" border="0" align="middle" width="30" height="30" alt="6">' \
+ '<img src="@IMAGEDIR@/button7.gif" border="0" align="middle" width="30" height="30" alt="7">' \
+ '<img src="@IMAGEDIR@/button8.gif" border="0" align="middle" width="30" height="30" alt="8">' \
+ '<img src="@IMAGEDIR@/button9.gif" border="0" align="middle" width="30" height="30" alt="9">' \
+ '<img src="@IMAGEDIR@/button10.gif" border="0" align="middle" width="30" height="30" alt="10">'
+#
+# To make the current page stand out, we will put a border around the
+# image for that page.
+#
+no_page_number_text: '<img src="@IMAGEDIR@/button1.gif" border="2" align="middle" width="30" height="30" alt="1">' \
+ '<img src="@IMAGEDIR@/button2.gif" border="2" align="middle" width="30" height="30" alt="2">' \
+ '<img src="@IMAGEDIR@/button3.gif" border="2" align="middle" width="30" height="30" alt="3">' \
+ '<img src="@IMAGEDIR@/button4.gif" border="2" align="middle" width="30" height="30" alt="4">' \
+ '<img src="@IMAGEDIR@/button5.gif" border="2" align="middle" width="30" height="30" alt="5">' \
+ '<img src="@IMAGEDIR@/button6.gif" border="2" align="middle" width="30" height="30" alt="6">' \
+ '<img src="@IMAGEDIR@/button7.gif" border="2" align="middle" width="30" height="30" alt="7">' \
+ '<img src="@IMAGEDIR@/button8.gif" border="2" align="middle" width="30" height="30" alt="8">' \
+ '<img src="@IMAGEDIR@/button9.gif" border="2" align="middle" width="30" height="30" alt="9">' \
+ '<img src="@IMAGEDIR@/button10.gif" border="2" align="middle" width="30" height="30" alt="10">'
+
+# local variables:
+# mode: text
+# eval: (if (eq window-system 'x) (progn (setq font-lock-keywords (list '("^#.*" . font-lock-keyword-face) '("^[a-zA-Z][^ :]+" . font-lock-function-name-face) '("[+$]*:" . font-lock-comment-face) )) (font-lock-mode)))
+# end: