Removed Autotools build files.

Signed-off-by: Mavridis Philippe <mavridisf@gmail.com>

1 files changed, 0 insertions, 267 deletions

diff --git a/configure.in b/configure.in
deleted file mode 100644
index a371ac5..0000000
--- a/configure.in
+++ /dev/null
@@ -1,267 +0,0 @@
-dnl =======================================================
-dnl FILE: ./admin/configure.in.min
-dnl =======================================================
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl    Boston, MA 02110-1301, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(klamav, 0.1) dnl searches for some needed programs
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_QT(3.3.5)
-AC_PATH_KDE
-dnl =======================================================
-dnl FILE: configure.in.in
-dnl =======================================================
-
-#MIN_CONFIG(3.3.5)
-
-dnl PACKAGE set before
-AC_C_BIGENDIAN
-AC_CHECK_KDEMAXPATHLEN
-
-###############################################################################
-# BEGIN PKG-CONFIG CHECK
-###############################################################################
-
-AC_ARG_VAR(PKGCONFIGFOUND, [Path to pkg-config])
-AC_CHECK_PROG(PKGCONFIGFOUND, pkg-config, [yes])
-
-###############################################################################
-# END PKG-CONFIG CHECK
-###############################################################################
-
-###############################################################################
-# BEGIN SQLITE CHECK
-###############################################################################
-
-LIB_SQLITE=""
-
-AC_ARG_WITH(included-sqlite,
-    AC_HELP_STRING([--without-included-sqlite],[build KlamAV using system sqlite library]),
-    [included_sqlite=$withval],
-    [included_sqlite=yes]
-)
-
-if test x$included_sqlite = xno; then
-    if test x$PKGCONFIGFOUND = xyes; then
-        PKG_CHECK_MODULES(SQLITE, sqlite3 >= 3.0, have_sqlite=yes,have_sqlite=no)
-
-        if test x$have_sqlite = xyes; then
-            LIB_SQLITE=`pkg-config --libs sqlite3`
-        else
-            AC_MSG_ERROR(Can't find sqlite database library. Check your installation of sqlite or use included sqlite.)
-        fi
-    fi
-fi
-
-AC_SUBST(LIB_SQLITE)
-AM_CONDITIONAL(with_included_sqlite, [test x$included_sqlite = xyes])
-
-# Determine pointer size for sqlite
-KDE_CHECK_TYPES
-AC_DEFINE(SQLITE_PTR_SZ, SIZEOF_CHAR_P, [Determine pointer size for SQLite])
-
-###############################################################################
-# END SQLITE CHECK
-###############################################################################
-
-
-# ---- Taken from KOffice ----------------------
-# --- Check for KDE 3.2 or 3.3 or 3.4 or 3.5 ---
-
-AC_MSG_CHECKING([for KDE version])
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-tdeversion_save_CXXFLAGS="$CXXFLAGS"
-tdeversion_safe_LIBS="$LIBS"
-LIBS="$LIBS $X_EXTRA_LIBS"
-CXXFLAGS="$CXXFLAGS $all_includes"
-
-AC_COMPILE_IFELSE([
-#include <tdeversion.h>
-#if ! ( KDE_IS_VERSION( 3, 2, 90 ) )
-#error KDE 3.2
-#endif
-],
-        need_kde32_compat="no"
-,
-        need_kde32_compat="yes"
-)
-
-AC_COMPILE_IFELSE([
-#include <tdeversion.h>
-#if ! ( KDE_IS_VERSION( 3, 3, 90 ) )
-#error KDE 3.3
-#endif
-],
-        need_kde33_compat="no"
-,
-        need_kde33_compat="yes"
-)
-
-AC_COMPILE_IFELSE([
-#include <tdeversion.h>
-#if ! ( KDE_IS_VERSION( 3, 4, 90 ) )
-#error KDE 3.4
-#endif
-],
-        need_kde34_compat="no"
-,
-        need_kde34_compat="yes"
-)
-
-AC_COMPILE_IFELSE([
-#include <tdeversion.h>
-#if ! ( KDE_IS_VERSION( 3, 5, 2 ) )
-#error KDE 3.5.x (x < 2)
-#endif
-],
-        need_kde351_compat="no"
-,
-        need_kde351_compat="yes"
-)
-CXXFLAGS="$tdeversion_save_CXXFLAGS"
-LIBS="$tdeversion_safe_LIBS"
-AC_LANG_RESTORE
-
-if test "$need_kde32_compat" = "yes"; then
-        AC_MSG_ERROR([You have KDE 3.2.x. KlamAV needs KDE 3.5.2 or greater.])
-else
-        if test "$need_kde33_compat" = "yes"; then
-                AC_MSG_ERROR([You have KDE 3.3.x KlamAV needs KDE 3.5.2 or greater.])
-        else 
-                if test "$need_kde34_compat" = "yes"; then
-                        AC_MSG_ERROR([You have KDE 3.4.x KlamAV needs KDE 3.5.2 or greater.])
-                else
-                        if test "$need_kde351_compat" = "yes"; then
-                                AC_MSG_ERROR([You have KDE 3.5.1. KlamAV needs KDE 3.5.2 or greater.])
-                        else
-                                AC_MSG_RESULT([KDE 3.5.x (x >=2) or SVN trunk])
-                        fi
-                fi
-        fi
-fi
-
-
-# --- End KDE 3.2 check ---
-
-
-
-
-AC_CHECK_LIB(clamav, cl_scanfile, [LIB_CLAM=" -lclamav";],AC_MSG_ERROR(Can't find ClamAV's libraries. Please check your installation of ClamAV.))
-AC_SUBST(LIB_CLAM)
-
-AC_CHECK_LIB(clamav, cl_free, [ tempres="no" ],tempres="yes")
-if test "$tempres" = "yes"; then
-  AC_DEFINE([SUPPORT_CLAMAV_V095],[],[Support ClamAV 0.95])
-fi
-
-KDE_CREATE_SUBDIRSLIST
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ doc/Makefile ])
-AC_CONFIG_FILES([ doc/en/Makefile ])
-AC_CONFIG_FILES([ po/Makefile ])
-AC_CONFIG_FILES([ src/Makefile ])
-AC_CONFIG_FILES([ src/about/Makefile ])
-AC_CONFIG_FILES([ src/action/Makefile ])
-AC_CONFIG_FILES([ src/arkollon/Makefile ])
-AC_CONFIG_FILES([ src/icons/Makefile ])
-AC_CONFIG_FILES([ src/klammail/Makefile ])
-AC_CONFIG_FILES([ src/sqlite/Makefile ])
-AC_OUTPUT
-# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
-if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
-  # And if so, warn when they don't match
-  if test "$kde_libs_prefix" != "$given_prefix"; then
-    # And if kde doesn't know about the prefix yet
-    echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
-    if test $? -ne 0; then
-      echo ""
-      echo "Warning: you chose to install this package in $given_prefix,"
-      echo "but KDE was found in $kde_libs_prefix."
-      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
-      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
-      echo "Then restart KDE."
-      echo ""
-    fi
-  fi
-fi
-
-if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
-  echo ""
-  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
-  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
-  echo ""
-  echo "For better performance, consider including the Qt visibility supporting patch"
-  echo "located at:"
-  echo ""
-  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
-  echo ""
-  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
-  echo "everything will continue to work just fine without it."
-  echo ""
-fi
-
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi