1 files changed, 231 insertions, 0 deletions
diff --git a/INSTALL b/INSTALL
new file mode 100644
@@ -0,0 +1,231 @@
+Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation,
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+ These are generic installation instructions.
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+The simplest way to compile this package is:
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+ 2. Type `make' to compile the package.
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+ 4. Type `make install' to install the programs and any data files and
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+Compilers and Options
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+ You can give `configure' initial values for variables by setting
+them in the environment. You can do that on the command line like this:
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ *Note Defining Variables::, for more details.
+Compiling For Multiple Architectures
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+Specifying the System Type
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it cannot guess the host type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+where SYSTEM can have one of these forms:
+ OS KERNEL-OS
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+ If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the host
+platform (i.e., that on which the generated programs will eventually be
+run) with `--host=TYPE'. In this case, you should also specify the
+build platform with `--build=TYPE', because, in this case, it may not
+be possible to guess the build platform (it sometimes involves
+compiling and running simple test programs, and this can't be done if
+the compiler is a cross compiler).
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+ ./configure CC=/usr/local2/bin/gcc
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+ `configure' recognizes the following options to control how it
+ Print a summary of the options to `configure', and exit.
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+ Alias for `--cache-file=config.cache'.
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.