# translation of kcmlocale.po to German # Thomas Diehl , 2002, 2003, 2004. # Stephan Johach , 2005, 2006. # Thomas Reitelbach , 2005, 2006, 2007. # translation of kcmlocale.po to # Übersetzung von kcmlocale.po ins Deutsche msgid "" msgstr "" "Project-Id-Version: kcmlocale\n" "POT-Creation-Date: 2021-07-07 18:16+0000\n" "PO-Revision-Date: 2019-11-02 14:26+0000\n" "Last-Translator: Chris \n" "Language-Team: German \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 3.9.1\n" #. Instead of a literal translation, add your name to the end of the list (separated by a comma). msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Thomas Diehl, Chris (TDE)" #. Instead of a literal translation, add your email to the end of the list (separated by a comma). msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "thd@kde.org" #: kcmlocale.cpp:55 msgid "Country or region:" msgstr "Land oder Region:" #: kcmlocale.cpp:61 msgid "Languages:" msgstr "Sprachen:" #: kcmlocale.cpp:70 msgid "Add Language" msgstr "Sprache hinzufügen" #: kcmlocale.cpp:74 msgid "Remove Language" msgstr "Sprache entfernen" #: kcmlocale.cpp:75 msgid "Move Up" msgstr "Nach oben" #: kcmlocale.cpp:76 msgid "Move Down" msgstr "Nach unten" #: kcmlocale.cpp:107 msgid "Install New Language" msgstr "Neue Sprache installieren" #: kcmlocale.cpp:109 msgid "Uninstall Language" msgstr "Sprache deinstallieren" #: kcmlocale.cpp:111 msgid "Select System Language" msgstr "Systemsprache wählen" #: kcmlocale.cpp:297 msgid "Other" msgstr "Sonstige" #: kcmlocale.cpp:305 kcmlocale.cpp:352 kcmlocale.cpp:373 msgid "without name" msgstr "ohne Namen" #: kcmlocale.cpp:465 msgid "" "This is where you live. TDE will use the defaults for this country or region." msgstr "" "Dies ist Ihr Wohnort. TDE wird die Voreinstellungen für dieses Land benutzen." #: kcmlocale.cpp:468 msgid "" "This will add a language to the list. If the language is already in the " "list, the old one will be moved instead." msgstr "" "Dies fügt der Liste eine Sprache hinzu. Befindet sich die Sprache bereits " "dort, wird sie in der Liste verschoben." #: kcmlocale.cpp:472 msgid "This will remove the highlighted language from the list." msgstr "Dies entfernt die ausgewählte Sprache aus der Liste." #: kcmlocale.cpp:475 msgid "" "TDE programs will be displayed in the first available language in this " "list.\n" "If none of the languages are available, US English will be used." msgstr "" "TDE-Programme werden automatisch in der Sprache dargestellt, die als erste " "in dieser Liste erscheint.\n" "Falls keine der angegebenen Sprachen verfügbar sein sollte, wird " "amerikanisches Englisch verwendet." #: kcmlocale.cpp:482 msgid "" "Here you can choose your country or region. The settings for languages, " "numbers etc. will automatically switch to the corresponding values." msgstr "" "Hier können Sie Ihr Land oder Ihre Region auswählen. Die Einstellungen für " "Sprache, Zahlen usw. werden dann automatisch auf entsprechende Werte gesetzt." #: kcmlocale.cpp:489 msgid "" "Here you can choose the languages that will be used by TDE. If the first " "language in the list is not available, the second will be used, etc. If only " "US English is available, no translations have been installed. You can get " "translation packages for many languages from the place you got TDE from." "

Note that some applications may not be translated to your languages; in " "this case, they will automatically fall back to US English." msgstr "" "Hier können Sie die Sprache wählen, die von TDE benutzt werden soll. Falls " "die erste Sprache in der Liste für ein Programm nicht verfügbar ist, wird " "automatisch die zweite benutzt usw. Ist nur amerikanisches Englisch " "verfügbar, dann wurden keine Übersetzungen installiert. Sie finden " "Übersetzungspakete für viele Sprachen normalerweise dort, wo Sie auch TDE " "erhalten haben.

Bitte beachten Sie, dass manche Programme vielleicht noch " "nicht in Ihre Sprache übersetzt wurden. In diesem Fall werden Sie " "automatisch in der Standardsprache dargestellt, also in amerikanischem " "Englisch." #: klocalesample.cpp:52 msgid "Numbers:" msgstr "Zahlen:" #: klocalesample.cpp:57 msgid "Money:" msgstr "Währung:" #: klocalesample.cpp:62 msgid "Date:" msgstr "Datum:" #: klocalesample.cpp:67 msgid "Short date:" msgstr "Kurzform für Datum:" #: klocalesample.cpp:72 msgid "Time:" msgstr "Zeit:" #: klocalesample.cpp:112 msgid "This is how numbers will be displayed." msgstr "So werden Zahlen dargestellt." #: klocalesample.cpp:116 msgid "This is how monetary values will be displayed." msgstr "So werden Währungseinheiten dargestellt." #: klocalesample.cpp:120 msgid "This is how date values will be displayed." msgstr "So werden Datumswerte dargestellt." #: klocalesample.cpp:124 msgid "This is how date values will be displayed using a short notation." msgstr "So werden Datumswerte in Kurzform dargestellt." #: klocalesample.cpp:129 msgid "This is how the time will be displayed." msgstr "So werden Zeitangaben dargestellt." #: localemon.cpp:54 msgid "Currency symbol:" msgstr "Währungsymbol:" #: localemon.cpp:61 msgid "Decimal symbol:" msgstr "Dezimalzeichen:" #: localemon.cpp:68 msgid "Thousands separator:" msgstr "Tausender-Unterteilung:" #: localemon.cpp:75 msgid "Fract digits:" msgstr "Dezimalstellen:" #: localemon.cpp:87 msgid "Positive" msgstr "Positiv" #: localemon.cpp:88 localemon.cpp:100 msgid "Prefix currency symbol" msgstr "Währungsymbol voranstellen" #: localemon.cpp:94 localemon.cpp:105 msgid "Sign position:" msgstr "Vorzeichenposition:" #: localemon.cpp:99 msgid "Negative" msgstr "Negativ" #: localemon.cpp:269 msgid "Parentheses Around" msgstr "Einklammern" #: localemon.cpp:270 msgid "Before Quantity Money" msgstr "Vor Betrag" #: localemon.cpp:271 msgid "After Quantity Money" msgstr "Nach Betrag" #: localemon.cpp:272 msgid "Before Money" msgstr "Vor Währungssymbol" #: localemon.cpp:273 msgid "After Money" msgstr "Nach Währungssymbol" #: localemon.cpp:278 msgid "" "Here you can enter your usual currency symbol, e.g. $ or DM.

Please note " "that the Euro symbol may not be available on your system, depending on the " "distribution you use." msgstr "" "Hier können Sie ein Währungssymbol angeben, z. B. $, € oder EUR.

Bitte " "beachten Sie, dass das Euro-Symbol auf Ihrem System vielleicht nicht " "verfügbar ist. Das hängt von der jeweils benutzten Distribution ab." #: localemon.cpp:285 msgid "" "Here you can define the decimal separator used to display monetary values." "

Note that the decimal separator used to display other numbers has to be " "defined separately (see the 'Numbers' tab)." msgstr "" "Hier können Sie das Dezimalzeichen festlegen, das zur Darstellung von " "Währungsangaben verwendet wird.

Beachten Sie, dass das Dezimalzeichen für " "sonstige Zahlen separat eingestellt wird (siehe die Karteikarte \"Zahlen\")." #: localemon.cpp:293 msgid "" "Here you can define the thousands separator used to display monetary values." "

Note that the thousands separator used to display other numbers has to be " "defined separately (see the 'Numbers' tab)." msgstr "" "Hier können Sie das Zeichen festlegen, das zur Abtrennung bzw. Gruppierung " "von Tausender-Einheiten bei Währungen verwendet wird.

Beachten Sie, dass " "das Zeichen für die Gruppierung von Tausendern bei sonstigen Zahlen separat " "eingestellt wird (siehe die Karteikarte \"Zahlen\")." #: localemon.cpp:301 msgid "" "This determines the number of fract digits for monetary values, i.e. the " "number of digits you find behind the decimal separator. Correct " "value is 2 for almost all people." msgstr "" "Hier wird die Anzahl der Dezimalstellen festgelegt, d. h. wie viele Zahlen " "nach dem Dezimalzeichen stehen. Der Normalwert ist hier meistens " "\"2\"." #: localemon.cpp:308 msgid "" "If this option is checked, the currency sign will be prefixed (i.e. to the " "left of the value) for all positive monetary values. If not, it will be " "postfixed (i.e. to the right)." msgstr "" "Wenn dieses Feld angekreuzt ist, dann wird allen positiven Währungsangaben " "das Währungssymbol vorangestellt (es steht also links). Ist es nicht " "angekreuzt, wird das Währungssymbol nachgestellt (steht also rechts)." #: localemon.cpp:314 msgid "" "If this option is checked, the currency sign will be prefixed (i.e. to the " "left of the value) for all negative monetary values. If not, it will be " "postfixed (i.e. to the right)." msgstr "" "Wenn dieses Feld angekreuzt ist, dann wird allen negativen Währungsangaben " "das Währungssymbol vorangestellt (es steht also links). Ist es nicht " "angekreuzt, wird das Währungssymbol nachgestellt (steht also rechts)." #: localemon.cpp:320 msgid "" "Here you can select how a positive sign will be positioned. This only " "affects monetary values." msgstr "" "Hier können Sie auswählen, welche Position das Positiv-Zeichen einnimmt. " "Davon sind ausschließlich Währungsangaben betroffen." #: localemon.cpp:325 msgid "" "Here you can select how a negative sign will be positioned. This only " "affects monetary values." msgstr "" "Hier können Sie auswählen, welche Position das Negativ-Zeichen einnimmt. " "Davon sind ausschließlich Währungsangaben betroffen." #: localenum.cpp:48 msgid "&Decimal symbol:" msgstr "&Dezimalzeichen:" #: localenum.cpp:54 msgid "Tho&usands separator:" msgstr "&Tausender-Unterteilung:" #: localenum.cpp:60 msgid "Positive si&gn:" msgstr "&Positiv-Zeichen:" #: localenum.cpp:66 msgid "&Negative sign:" msgstr "&Negativ-Zeichen:" #: localenum.cpp:165 msgid "" "Here you can define the decimal separator used to display numbers (i.e. a " "dot or a comma in most countries).

Note that the decimal separator used to " "display monetary values has to be set separately (see the 'Money' tab)." msgstr "" "Hier können Sie das Dezimalzeichen festlegen, das zur Darstellung von Zahlen " "benutzt wird (in den meisten Ländern ein Komma oder ein Punkt).

Beachten " "Sie, dass das Dezimalzeichen für Währungsangaben separat eingestellt wird " "(siehe die Karteikarte \"Währung\")." #: localenum.cpp:174 msgid "" "Here you can define the thousands separator used to display numbers.

Note " "that the thousands separator used to display monetary values has to be set " "separately (see the 'Money' tab)." msgstr "" "Hier können Sie das Zeichen festlegen, das zur Abtrennung bzw. Gruppierung " "von Tausender-Einheiten verwendet wird.

Beachten Sie, dass das Zeichen für " "die Gruppierung von Tausendern bei Währungsangaben separat eingestellt wird " "(siehe die Karteikarte \"Währung\")." #: localenum.cpp:182 msgid "" "Here you can specify text used to prefix positive numbers. Most people leave " "this blank." msgstr "" "Hier können Sie Text eingeben, der positiven Zahlen voranstehen soll. Die " "meisten Anwender lassen dieses Feld leer." #: localenum.cpp:188 msgid "" "Here you can specify text used to prefix negative numbers. This should not " "be empty, so you can distinguish positive and negative numbers. It is " "normally set to minus (-)." msgstr "" "Hier können Sie Text eingeben, der negativen Zahlen vorausgehen soll. Dieses " "Feld sollte nicht leer sein, damit Sie zwischen positiven und negativen " "Werten unterscheiden können. Normalerweise steht hier Minus (-)." #: localeother.cpp:48 msgid "Paper format:" msgstr "Papierformat:" #: localeother.cpp:55 msgid "Measure system:" msgstr "Maßsystem:" #: localeother.cpp:119 msgid "" "_: The Metric System\n" "Metric" msgstr "Metrisch" #: localeother.cpp:121 msgid "" "_: The Imperial System\n" "Imperial" msgstr "Imperial" #: localeother.cpp:123 msgid "A4" msgstr "A4" #: localeother.cpp:124 msgid "US Letter" msgstr "US Brief" #: localetime.cpp:94 msgid "HH" msgstr "SS" #: localetime.cpp:95 msgid "hH" msgstr "sS" #: localetime.cpp:96 msgid "PH" msgstr "PS" #: localetime.cpp:97 msgid "pH" msgstr "pS" #: localetime.cpp:98 msgid "" "_: Minute\n" "MM" msgstr "MM" #: localetime.cpp:99 msgid "SS" msgstr "SEKSEK" #: localetime.cpp:100 msgid "AMPM" msgstr "AMPM" #: localetime.cpp:110 msgid "YYYY" msgstr "JJJJ" #: localetime.cpp:111 msgid "YY" msgstr "JJ" #: localetime.cpp:112 msgid "mM" msgstr "mM" #: localetime.cpp:113 msgid "" "_: Month\n" "MM" msgstr "MM" #: localetime.cpp:114 msgid "SHORTMONTH" msgstr "KURZMONAT" #: localetime.cpp:115 msgid "MONTH" msgstr "MONAT" #: localetime.cpp:116 msgid "dD" msgstr "tT" #: localetime.cpp:117 msgid "DD" msgstr "TT" #: localetime.cpp:118 msgid "SHORTWEEKDAY" msgstr "WOCHENTAGKURZ" #: localetime.cpp:119 msgid "WEEKDAY" msgstr "WOCHENTAG" #: localetime.cpp:203 msgid "Calendar system:" msgstr "Kalendersystem:" #: localetime.cpp:211 msgid "Time format:" msgstr "Zeitformat:" #: localetime.cpp:218 msgid "Date format:" msgstr "Datumsformat:" #: localetime.cpp:223 msgid "Short date format:" msgstr "Kurzformat für Datum:" #: localetime.cpp:228 msgid "First day of the week:" msgstr "Erster Tag der Woche:" #: localetime.cpp:235 msgid "Use declined form of month name" msgstr "Monatsnamen deklinieren" #: localetime.cpp:428 msgid "" "_: some reasonable time formats for the language\n" "HH:MM:SS\n" "pH:MM:SS AMPM" msgstr "SS:MM:SEKSEK" #: localetime.cpp:436 msgid "" "_: some reasonable date formats for the language\n" "WEEKDAY MONTH dD YYYY\n" "SHORTWEEKDAY MONTH dD YYYY" msgstr "" "WOCHENTAG MONAT tT JJJJ\n" "WOCHENTAGKURZ MONAT tT JJJJ" #: localetime.cpp:444 msgid "" "_: some reasonable short date formats for the language\n" "YYYY-MM-DD\n" "dD.mM.YYYY\n" "DD.MM.YYYY" msgstr "" "TT.MM.JJJJ\n" "tT.mM.JJJJ\n" "TT-MM-JJJJ" #: localetime.cpp:455 msgid "" "_: Calendar System Gregorian\n" "Gregorian" msgstr "Gregorianisch" #: localetime.cpp:457 msgid "" "_: Calendar System Hijri\n" "Hijri" msgstr "Hijri" #: localetime.cpp:459 msgid "" "_: Calendar System Hebrew\n" "Hebrew" msgstr "Hebräisch" #: localetime.cpp:461 msgid "" "_: Calendar System Jalali\n" "Jalali" msgstr "Jalali" #: localetime.cpp:464 msgid "" "

The text in this textbox will be used to format time strings. The " "sequences below will be replaced:

HHThe " "hour as a decimal number using a 24-hour clock (00-23).
hHThe hour (24-hour clock) as a decimal number " "(0-23).
PHThe hour as a decimal number " "using a 12-hour clock (01-12).
pHThe hour " "(12-hour clock) as a decimal number (1-12).
MMThe minutes as a decimal number (00-59).
SSThe seconds as a decimal number (00-59).
AMPMEither \"am\" or \"pm\" according to the given time value. Noon " "is treated as \"pm\" and midnight as \"am\".
" msgstr "" "

Dieser Text wird verwendet, um Zeitangaben zu formatieren. Die folgenden " "Sequenzen werden entsprechend ersetzt:

SSStunden als Dezimalzahl (24-Stunden-Format) (00-23).
sSStunden als Dezimalzahl (24-Stunden-Format) " "(0-23).
PSStunden als Dezimalzahl (12-" "Stunden-Format) (01-12).
pHStunden als " "Dezimalzahl (12-Stunden-Format) (1-12).
MMMinuten als Dezimalzahl (00-59).
SEKSEKSekunden als Dezimalzahl (00-59).
AMPMEntweder \"am\" (ante meridiem - vormittags) oder \"pm\" (post " "meridiem - nachmittags), je nach Wert. Mittag wird als \"pm\" behandelt, " "Mitternacht als \"am\".
" #: localetime.cpp:487 msgid "" "
YYYYThe year with century as a decimal number." "
YYThe year without century as a decimal " "number (00-99).
MMThe month as a decimal " "number (01-12).
mMThe month as a decimal " "number (1-12).
SHORTMONTHThe first three " "characters of the month name.
MONTHThe " "full month name.
DDThe day of month as a " "decimal number (01-31).
dDThe day of month " "as a decimal number (1-31).
SHORTWEEKDAYThe " "first three characters of the weekday name.
WEEKDAYThe full weekday name.
" msgstr "" "
JJJJDas Jahr mit Jahrhundert als Zahl.
JJDas Jahr ohne Jahrhundert als Zahl (00-99).
MMDer Monat als Zahl (01-12).
mMDer Monat als Zahl (1-12).
KURZMONATDie ersten drei Zeichen des Monatsnamens." "
MONATDer volle Monatsname.
TTDer Tag des Monats als Zahl (01-31).
tTDer Tag des Monats als Zahl (1-31).
WOCHENTAGKURZDie ersten zwei Zeichen des " "Wochentages.
WOCHENTAG Der volle Name des " "Wochentags.
" #: localetime.cpp:508 msgid "" "

The text in this textbox will be used to format long dates. The sequences " "below will be replaced:

" msgstr "" "

Der Text in diesem Feld wird benutzt, um ausführliche Anzeigen eines " "Datums vorzunehmen. Die folgenden Sequenzen werden ersetzt:

" #: localetime.cpp:514 msgid "" "

The text in this textbox will be used to format short dates. For " "instance, this is used when listing files. The sequences below will be " "replaced:

" msgstr "" "

Der Text in diesem Feld wird benutzt, um kurze Anzeigen eines Datums " "durchzuführen, z. B. bei Dateilisten. Die folgenden Sequenzen werden ersetzt:" "

" #: localetime.cpp:521 msgid "" "

This option determines which day will be considered as the first one of " "the week.

" msgstr "" "

Diese Einstellung legt fest, welcher Tag der Woche als der erste " "angesehen wird.

" #: localetime.cpp:528 msgid "" "

This option determines whether possessive form of month names should be " "used in dates.

" msgstr "" "

Diese Einstellung legt fest, ob spezielle Formen von Monatsnamen bei " "Datumsangaben verwendet werden sollen.

" #: toplevel.cpp:53 msgid "KCMLocale" msgstr "KCMLocale" #: toplevel.cpp:55 msgid "Regional settings" msgstr "Regionales" #: toplevel.cpp:178 msgid "" "Changed language settings apply only to newly started applications.\n" "To change the language of all programs, you will have to logout first." msgstr "" "Die Änderung der Sprache betrifft nur Programme, die neu gestartet werden.\n" "Um die Sprache für alle Programme zu ändern, müssen Sie sich erst abmelden." #: toplevel.cpp:182 msgid "Applying Language Settings" msgstr "Spracheinstellungen werden übernommen" #: toplevel.cpp:233 msgid "" "

Country/Region & Language

\n" "

From here you can configure language, numeric, and time \n" "settings for your particular region. In most cases it will be \n" "sufficient to choose the country you live in. For instance TDE \n" "will automatically choose \"German\" as language if you choose \n" "\"Germany\" from the list. It will also change the time format \n" "to use 24 hours and and use comma as decimal separator.

\n" msgstr "" "

Land und Sprache

\n" "

Hier können Sie die Sprache sowie die Zahlen- und Datumseinstellungen\n" "für Ihre Region vornehmen. In den meisten Fällen reicht es aus, das\n" "Land zu wählen in dem Sie wohnen. Zum Beispiel wird TDE automatisch\n" "\"Deutsch\" als Sprache vorgeben, wenn Sie \"Deutschland\" aus der Liste\n" "wählen. Es wird in diesem Fall auch das 24-Stunden-Zeitformat und das\n" "Komma als Dezimalzeichen ausgewählt.

\n" #: toplevel.cpp:277 msgid "Examples" msgstr "Beispiele" #: toplevel.cpp:278 msgid "&Locale" msgstr "&Regionales" #: toplevel.cpp:279 msgid "&Numbers" msgstr "Zah&len" #: toplevel.cpp:280 msgid "&Money" msgstr "Währ&ung" #: toplevel.cpp:281 msgid "&Time && Dates" msgstr "Zei&t && Datum" #: toplevel.cpp:282 msgid "&Other" msgstr "&Sonstige"