# translation of kxsldbg.po to Swedish
# Översättning av kxsldbg.po till Svenska
# Copyright (C) 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
#
# Mattias Newzella <newzella@linux.nu>, 2003.
# Stefan Asserhäll <stefan.asserhall@comhem.se>, 2004, 2005, 2007.
msgid ""
msgstr ""
"Project-Id-Version: kxsldbg\n"
"POT-Creation-Date: 2024-03-25 18:21+0000\n"
"PO-Revision-Date: 2007-06-26 17:48+0200\n"
"Last-Translator: Stefan Asserhäll <stefan.asserhall@comhem.se>\n"
"Language-Team: Swedish <sv@li.org>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Stefan Asserhäll"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "stefan.asserhall@comhem.se"

#: kxsldbg.cpp:67
msgid "&XSLDbg Handbook"
msgstr ""

#: kxsldbg.cpp:76
msgid "Could not find our part."
msgstr "Kunde inte hitta delprogram."

#: kxsldbg.cpp:176
msgid "File: %1  Line: %2  Col: %3"
msgstr "Fil: %1  Rad: %2  Kol: %3"

#: kxsldbgpart/kxsldbg_part.cpp:87 kxsldbgpart/kxsldbg_part.cpp:634
#: kxsldbgpart/kxsldbg_part.cpp:636
msgid "Goto XPath"
msgstr "Gå till Xpath"

#: kxsldbgpart/kxsldbg_part.cpp:95 kxsldbgpart/xsldbgglobalvariables.ui:185
#: kxsldbgpart/xsldbglocalvariables.ui:122
#, no-c-format
msgid "Evaluate"
msgstr "Beräkna"

#: kxsldbgpart/kxsldbg_part.cpp:109
msgid "Configure Editor..."
msgstr "Anpassa editor..."

#: kxsldbgpart/kxsldbg_part.cpp:113
msgid "Configure..."
msgstr "Anpassa..."

#: kxsldbgpart/kxsldbg_part.cpp:118
msgid "Inspect..."
msgstr "Inspektera..."

#: kxsldbgpart/kxsldbg_part.cpp:125
msgid "Run"
msgstr "Kör"

#: kxsldbgpart/kxsldbg_part.cpp:135
msgid "Step"
msgstr "Stega"

#: kxsldbgpart/kxsldbg_part.cpp:140 kxsldbgpart/xsldbgconfig.ui:261
#, no-c-format
msgid "Next"
msgstr "Nästa"

#: kxsldbgpart/kxsldbg_part.cpp:145
msgid "Step Up"
msgstr "Stega upp"

#: kxsldbgpart/kxsldbg_part.cpp:150
msgid "Step Down"
msgstr "Stega ner"

#: kxsldbgpart/kxsldbg_part.cpp:156
msgid "Break"
msgstr "Bryt"

#: kxsldbgpart/kxsldbg_part.cpp:161
msgid "Enable/Disable"
msgstr "Aktivera/inaktivera"

#: kxsldbgpart/kxsldbg_part.cpp:171
msgid "&Source"
msgstr "&Källkod"

#: kxsldbgpart/kxsldbg_part.cpp:176
msgid "&Data"
msgstr "&Data"

#: kxsldbgpart/kxsldbg_part.cpp:181
msgid "&Output"
msgstr "&Utmatning"

#: kxsldbgpart/kxsldbg_part.cpp:186
msgid "Reload Current File From Disk"
msgstr "Ladda om aktuell fil från disk"

#: kxsldbgpart/kxsldbg_part.cpp:192
msgid "Walk Through Stylesheet..."
msgstr "Gå igenom stilmall..."

#: kxsldbgpart/kxsldbg_part.cpp:196
msgid "Stop Wal&king Through Stylesheet"
msgstr "Stoppa &genomgång av stilmall"

#: kxsldbgpart/kxsldbg_part.cpp:200
msgid "Tr&ace Execution of Stylesheet"
msgstr "&Spåra körning av stilmal"

#: kxsldbgpart/kxsldbg_part.cpp:204
msgid "Stop Tracing of Stylesheet"
msgstr "Stoppa spårning av stilmall"

#: kxsldbgpart/kxsldbg_part.cpp:209
msgid "&Evaluate Expression..."
msgstr "Ut&värdera uttryck..."

#: kxsldbgpart/kxsldbg_part.cpp:214
msgid "Goto &XPath..."
msgstr "Gå till &Xpath..."

#: kxsldbgpart/kxsldbg_part.cpp:219
msgid "Lookup SystemID..."
msgstr "Slå upp SystemID..."

#: kxsldbgpart/kxsldbg_part.cpp:224
msgid "Lookup PublicID..."
msgstr "Slå upp PublicID..."

#: kxsldbgpart/kxsldbg_part.cpp:277
msgid "KXsldbgPart"
msgstr "K-delprogram för XSL-felsökare"

#: kxsldbgpart/kxsldbg_part.cpp:358
msgid "Debugger Not Ready"
msgstr "Felsökare inte klar"

#: kxsldbgpart/kxsldbg_part.cpp:359
msgid "Configure and start the debugger first."
msgstr "Anpassa och starta felsökaren först."

#: kxsldbgpart/kxsldbg_part.cpp:376 kxsldbgpart/kxsldbg_part.cpp:382
msgid "Lookup SystemID"
msgstr "Slå upp SystemID"

#: kxsldbgpart/kxsldbg_part.cpp:377 kxsldbgpart/kxsldbg_part.cpp:383
msgid "Please enter SystemID to find:"
msgstr "Skriv in SystemID att söka efter:"

#: kxsldbgpart/kxsldbg_part.cpp:408 kxsldbgpart/kxsldbg_part.cpp:413
msgid "Lookup PublicID"
msgstr "Slå upp PublicID"

#: kxsldbgpart/kxsldbg_part.cpp:409 kxsldbgpart/kxsldbg_part.cpp:414
msgid "Please enter PublicID to find:"
msgstr "Skriv in PublicID att söka efter:"

#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
msgid "Evalute Expression"
msgstr "Utvärdera uttryck"

#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
#: kxsldbgpart/kxsldbg_part.cpp:634 kxsldbgpart/kxsldbg_part.cpp:636
msgid "XPath:"
msgstr "Xpath:"

#: kxsldbgpart/kxsldbg_part.cpp:738 kxsldbgpart/libxsldbg/xsldbg.cpp:589
msgid "Error: Too many file names supplied via command line.\n"
msgstr "Fel: För många filnamn angavs via kommandoraden.\n"

#: kxsldbgpart/kxsldbg_part.cpp:802
msgid "SystemID or PublicID Resolution Result"
msgstr "Resultat av SystemID eller PublicID upplösning"

#: kxsldbgpart/kxsldbg_part.cpp:803
#, c-format
msgid ""
"SystemID or PublicID has been resolved to\n"
".%1"
msgstr ""
"SystemID eller PublicID har fått upplösningen\n"
".%1"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:623
msgid "disabled"
msgstr "inaktiverad"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:624
msgid "enabled"
msgstr "aktiverad"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:643
msgid ""
"Breakpoint %1 %2 for template: \"%3\" mode: \"%4\" in file \"%5\" at line %6"
msgstr ""
"Brytpunkt %1 %2 för mallen: \"%3\" läge: \"%4\" i filen \"%5\" på rad %6"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:645
msgid "Breakpoint %1 %2 for template: \"%3\" mode: \"%4\""
msgstr "Brytpunkt %1 %2 för mallen: \"%3\" läge: \"%4\""

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:94
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:345
msgid "Failed to add breakpoint."
msgstr "Misslyckades lägga till brytpunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:97
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:352
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:800
#: kxsldbgpart/libxsldbg/debugXSL.cpp:510
msgid "Error: Debugger has no files loaded. Try reloading files.\n"
msgstr ""
"Fel: Felsökaren har inte laddat några filer. Försök att ladda om filer.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:113
msgid "Error: Unable to parse %1 as a number of frames.\n"
msgstr "Fel: Kan inte tolka %1 som ett antal ramar.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:151
msgid "Error: Stylesheet is not valid or file is not loaded.\n"
msgstr "Fel: Stilmallen är inte giltig eller filen är inte laddad.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:191
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:215
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:302
msgid ""
"Warning: Breakpoint for file \"%1\" at line %2 does not seem to be valid.\n"
msgstr ""
"Varning: Brytpunkt för filen \"%1\" på rad %2 verkar inte vara giltig.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:213
msgid "Error: Unable to find a stylesheet file whose name contains %1.\n"
msgstr "Fel: Kan inte hitta en stilmallsfil vars namn innehåller %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:223
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:318
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:1031
#: kxsldbgpart/libxsldbg/debugXSL.cpp:679
#: kxsldbgpart/libxsldbg/debugXSL.cpp:713
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1237
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1340 kxsldbgpart/libxsldbg/files.cpp:1353
#: kxsldbgpart/libxsldbg/files_unix.cpp:62
#: kxsldbgpart/libxsldbg/files_unix.cpp:154
#: kxsldbgpart/libxsldbg/search.cpp:113 kxsldbgpart/libxsldbg/search.cpp:1198
#: kxsldbgpart/libxsldbg/search.cpp:1261 kxsldbgpart/libxsldbg/search.cpp:1322
#: kxsldbgpart/libxsldbg/search.cpp:1374 kxsldbgpart/libxsldbg/search.cpp:1422
#: kxsldbgpart/libxsldbg/search.cpp:1476 kxsldbgpart/libxsldbg/search.cpp:1522
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:105
#: kxsldbgpart/libxsldbg/xsldbg.cpp:510 kxsldbgpart/libxsldbg/xsldbg.cpp:1052
msgid "Error: Out of memory.\n"
msgstr "Fel: Minnet slut.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:249
msgid "Error: Data file is invalid. Try the run command first.\n"
msgstr "Fel: Datafilen är ogiltig. Försök först med körkommandot.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:304
msgid "Error: Unable to find a data file whose name contains %1.\n"
msgstr "Fel: Kan inte hitta en datafil vars namn innehåller %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:375
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:695
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:821
#: kxsldbgpart/libxsldbg/param_cmds.cpp:107
msgid "Error: Unable to parse %1 as a line number.\n"
msgstr "Fel: Kan inte tolka %1 som ett radnummer.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:419
msgid "Error: Unable to find the added breakpoint."
msgstr "Fel: Kan inte hitta den tillagda brytpunkten."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:425
#: kxsldbgpart/libxsldbg/search.cpp:491 kxsldbgpart/libxsldbg/trace_cmds.cpp:68
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:111
msgid "Error: Invalid arguments to command %1.\n"
msgstr "Fel: Felaktiga väljare till kommandot %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:527
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:722
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:848
msgid "Error: Invalid arguments for command %1.\n"
msgstr "Fel: Ogiltiga väljare för kommandot %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:596
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:952
msgid ""
"Information: Breakpoint validation has caused breakpoint %1 to be re-"
"created.\n"
msgstr ""
"Information: Validering av brytpunkter har gjort att brytpunkten %1 har "
"skapats om.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:603
msgid "Warning: Breakpoint exits for file \"%1\" at line %2.\n"
msgstr "Varning: Brytpunkt avslutar för filen \"%1\" på rad %2.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:626
msgid "Error: No templates found or unable to add breakpoint.\n"
msgstr "Fel: Inga mallar hittades eller brytpunkt kunde inte läggas till.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:631
#, c-format
msgid ""
"_n: Information: Added %n new breakpoint.\n"
"Information: Added %n new breakpoints."
msgstr ""
"Information: %n ny brytpunkt tillagd.\n"
"Information: %n nya brytpunkter tillagda."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:651
msgid "Error: Failed to add breakpoint for file \"%1\" at line %2.\n"
msgstr "Fel: Misslyckades lägga till brytpunkt i filen \"%1\" på rad %2.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:653
msgid "Error: Failed to add breakpoint.\n"
msgstr "Fel: Misslyckades lägga till brytpunkt.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:677
msgid "Failed to delete breakpoint."
msgstr "Misslyckades ta bort brytpunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:714
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:842
msgid "Error: Breakpoint does not exist for file \"%1\" at line %2.\n"
msgstr "Fel: Brytpunkt finns inte för filen \"%1\" på rad %2.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:735
msgid "Error: Unable to delete breakpoint %1.\n"
msgstr "Fel: Kan inte ta bort brytpunkt %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:738
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:864
msgid "Error: Breakpoint %1 does not exist.\n"
msgstr "Fel: Brytpunkt %1 finns inte.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:745
msgid "Error: Unable to delete breakpoint at template %1.\n"
msgstr "Fel: Kan inte ta bort brytpunkt i mallen %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:748
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:871
msgid "Error: Breakpoint at template \"%1\" does not exist.\n"
msgstr "Fel: Brytpunkt i mallen \"%1\" finns inte.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:797
msgid "Failed to enable/disable breakpoint."
msgstr "Misslyckades aktivera eller inaktivera brytpunkt."

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:861
msgid "Error: Unable to enable/disable breakpoint %1.\n"
msgstr "Fel: Kan inte aktivera eller inaktivera brytpunkten %1.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:956
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:995
msgid "Warning: Validation of breakpoint %1 failed.\n"
msgstr "Varning: Validering av brytpunkten %1 misslyckades.\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:984
msgid ""
"Information: Breakpoint validation has caused one or more breakpoints to be "
"re-created.\n"
msgstr ""
"Information: Validering av brytpunkter har gjort att en eller flera "
"brytpunkter har skapats om.\n"

#: kxsldbgpart/libxsldbg/debug.cpp:135
msgid "Error: XSLT source and XML data are empty. Cannot enter the debugger.\n"
msgstr ""
"Fel: XSLT-källkod och XML-data är tomma. Kan inte gå in i felsökaren.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:532
msgid "Error: The XSLT template named \"%1\" was not found.\n"
msgstr "Fel: XSLT-mallen med namnet \"%1\" hittades inte.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:535
msgid " template: \"%1\"\n"
msgstr " mall: \"%1\"\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:560
#: kxsldbgpart/libxsldbg/debugXSL.cpp:566
msgid "Error: Unable to cd. No stylesheet loaded.\n"
msgstr "Fel: Kan inte byta katalog. Ingen stilmall laddad.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:563
msgid "Error: Unknown arguments to the command %1.\n"
msgstr "Fel: Okända väljare för kommandot %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:585
msgid "Error: Invalid arguments to the command %1.\n"
msgstr "Fel: Felaktiga väljare för kommandot %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:606
msgid ""
"_n: Warning: XPath %1 is a Node Set with %n child.\n"
"Warning: XPath %1 is a Node Set with %n children."
msgstr ""
"Varning: XPath %1 är en noduppsättning med %n delnod.\n"
"Varning: XPath %1 är en noduppsättning med %n delnoder."

#: kxsldbgpart/libxsldbg/debugXSL.cpp:608
msgid "Warning: XPath %1 is an empty Node Set.\n"
msgstr "Varning: XPath %1 är en tom noduppsättning.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:617
msgid "Error: XPath %1 was not found.\n"
msgstr "Fel: XPath %1 hittades inte.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:672
#: kxsldbgpart/libxsldbg/debugXSL.cpp:675
#: kxsldbgpart/libxsldbg/debugXSL.cpp:706
msgid "#%1 template: \"%2\" mode: \"%3\""
msgstr "#%1 mall: \"%2\" läge: \"%3\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:677
#: kxsldbgpart/libxsldbg/debugXSL.cpp:694
#: kxsldbgpart/libxsldbg/debugXSL.cpp:709
#: kxsldbgpart/libxsldbg/debugXSL.cpp:762
msgid " in file \"%1\" at line %2\n"
msgstr " i filen \"%1\" på rad %2\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:692
msgid "#%1 template: \"LIBXSLT_DEFAULT\" mode: \"\""
msgstr "#%1 mall: \"LIBXSLT_DEFAULT\" läge: \"\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:735
msgid "\tNo items in call stack.\n"
msgstr "\tInga objekt i anropsstack.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:758
msgid "#%1 template: \"%2\""
msgstr "#%1 mall: \"%2\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1025
msgid "Information: Updating search database. This may take a while...\n"
msgstr "Information: Uppdaterar sökdatabasen. Det kan ta en viss tid...\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1028
msgid "Information: Looking for breakpoints.\n"
msgstr "Information: Letar efter brytpunkter.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1030
msgid "Information: Looking for imports and top-level stylesheets.\n"
msgstr "Information: Letar efter importer och stilmallar på toppnivå.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1032
msgid "Information: Looking for xsl:includes.\n"
msgstr "Information: Letar efter xsl:includes.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1034
msgid "Information: Looking for templates.\n"
msgstr "Information: Letar efter mallar.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1036
msgid "Information: Looking for global variables.\n"
msgstr "Information: Letar efter globala variabler.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1038
msgid "Information: Looking for local variables.\n"
msgstr "Information: Letar efter lokala variabler.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1040
msgid "Information: Formatting output.\n"
msgstr "Information: Formaterar utmatning.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1108
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1118
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1136
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1138
msgid ""
"\n"
"Reached template: \"%1\" mode: \"%2\"\n"
msgstr ""
"\n"
"Kom fram till mall: \"%1\" läge: \"%2\"\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1295
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2091
msgid "Breakpoint for file \"%1\" at line %2.\n"
msgstr "Brytpunkt för filen \"%1\" på rad %2.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1297
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2093
msgid "Breakpoint at text node in file \"%1\".\n"
msgstr "Brytpunkt vid textnod i filen \"%1\".\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1460
msgid ""
"Unable to print local help. Online help can be found at http://xsldbg."
"sourceforge.net/docs/index.html.\n"
msgstr ""
"Kan inte skriva ut lokal hjälp. Direkthjälp finns på http://xsldbg."
"sourceforge.net/docs/index.html.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1613
msgid ""
"\n"
"No breakpoints are set for the file.\n"
msgstr ""
"\n"
"Inga brytpunkter är satta för filen.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1615
#, c-format
msgid ""
"_n: \tTotal of %n breakpoint present.\n"
"\tTotal of %n breakpoints present."
msgstr ""
"\tTotalt %n brytpunkt finns.\n"
"\tTotalt %n brytpunkter finns."

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1634
msgid "Error: Unable to delete breakpoint.\n"
msgstr "Fel: Kan inte ta bort brytpunkt.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1656
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1676
msgid "Error: Unable to enable/disable breakpoint.\n"
msgstr "Fel: Kan inte aktivera eller inaktivera brytpunkt.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1709
msgid " in file \"%1\" at line %2"
msgstr " i filen \"%1\" på rad %2"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1717
msgid "Error: Unable to print working directory.\n"
msgstr "Fel: Kan inte skriva ut arbetskatalog.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1737
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1759
msgid "Error: Need to use the run command first.\n"
msgstr "Fel: Körkommandot måste först användas.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1794
msgid "Load of source deferred. Use the run command.\n"
msgstr "Laddning av källkod fördröjd. Använd körkommandot.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1834
msgid "Load of data file deferred. Use the run command.\n"
msgstr "Laddning av datafil fördröjd. Använd körkommandot.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1888
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1901
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2061
#: kxsldbgpart/libxsldbg/file_cmds.cpp:248
#: kxsldbgpart/libxsldbg/file_cmds.cpp:265
#: kxsldbgpart/libxsldbg/param_cmds.cpp:52
#: kxsldbgpart/libxsldbg/param_cmds.cpp:71
#: kxsldbgpart/libxsldbg/param_cmds.cpp:101
#: kxsldbgpart/libxsldbg/param_cmds.cpp:115
msgid "Error: Invalid arguments for the command %1.\n"
msgstr "Fel: Ogiltiga väljare för kommandot %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1911
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1932
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1940
msgid "Warning: The %1 command is disabled.\n"
msgstr "Varning: Kommandot %1 är inaktiverat.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1996
msgid "Opening terminal %1.\n"
msgstr "Öppnar terminal %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2012
#: kxsldbgpart/libxsldbg/file_cmds.cpp:213
#: kxsldbgpart/libxsldbg/file_cmds.cpp:269
#: kxsldbgpart/libxsldbg/option_cmds.cpp:113
#: kxsldbgpart/libxsldbg/option_cmds.cpp:116
#: kxsldbgpart/libxsldbg/os_cmds.cpp:49
msgid "Error: Missing arguments for the command %1.\n"
msgstr "Fel: Saknar väljare för kommandot %1.\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2016
msgid "Warning: The %1 command is disabled\n"
msgstr "Varning: Kommandot %1 är inaktiverat\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2080
msgid "Error: Unknown command %1. Try help.\n"
msgstr "Fel: Okänt kommando %1. Försök med hjälp.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:71
msgid "Entity %1 "
msgstr "Objekt %1 "

#: kxsldbgpart/libxsldbg/file_cmds.cpp:78
msgid "No external General Parsed entities present.\n"
msgstr "Inga externa generellt tolkade objekt finns.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:80
#, c-format
msgid ""
"_n: \tTotal of %n entity found.\n"
"\tTotal of %n entities found."
msgstr ""
"\tTotalt %n objekt hittades.\n"
"\tTotalt %n objekt hittades."

#: kxsldbgpart/libxsldbg/file_cmds.cpp:121
#: kxsldbgpart/libxsldbg/file_cmds.cpp:129
msgid "SystemID \"%1\" was not found in current catalog.\n"
msgstr "SystemID \"%1\" hittades inte i nuvarande katalog.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:125
msgid "SystemID \"%1\" maps to: \"%2\"\n"
msgstr "SystemID \"%1\" motsvarar: \"%2\"\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:168
#: kxsldbgpart/libxsldbg/file_cmds.cpp:176
msgid "PublicID \"%1\" was not found in current catalog.\n"
msgstr "PublicID \"%1\" hittades inte i nuvarande katalog.\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:172
msgid "PublicID \"%1\" maps to: \"%2\"\n"
msgstr "PublicID \"%1\" motsvarar: \"%2\"\n"

#: kxsldbgpart/libxsldbg/files.cpp:195 kxsldbgpart/libxsldbg/files.cpp:218
msgid "Error: Unable to open terminal %1.\n"
msgstr "Fel: Kunde inte öppna terminal %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:198
msgid "Error: Did not previously open terminal.\n"
msgstr "Fel: Öppnade inte terminal tidigare.\n"

#: kxsldbgpart/libxsldbg/files.cpp:500
msgid "Error: The file name \"%1\" is too long.\n"
msgstr "Fel: Filnamnet \"%1\" är för långt.\n"

#: kxsldbgpart/libxsldbg/files.cpp:524
msgid "Error: Unable to change to directory %1.\n"
msgstr "Fel: Kan inte byta till katalogen %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:527
msgid "Changed to directory %1.\n"
msgstr "Bytte till katalogen %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:555
msgid "Setting XML Data file name to %1.\n"
msgstr "Ställer in XML-datafilens namn till %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:567
msgid "Setting stylesheet file name to %1.\n"
msgstr "Ställer in stilmallens filnamn till %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:584
msgid "Setting stylesheet base path to %1.\n"
msgstr "Ställer in stilmallarnas bassökväg till %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:601
msgid "Missing file name.\n"
msgstr "Saknar filnamn.\n"

#: kxsldbgpart/libxsldbg/files.cpp:1108 kxsldbgpart/libxsldbg/files.cpp:1143
msgid "Encoding of text failed.\n"
msgstr "Kodning av text misslyckades.\n"

#: kxsldbgpart/libxsldbg/files.cpp:1179
#, c-format
msgid "Unable to initialize encoding %1."
msgstr "Kan inte initiera kodning %1."

#: kxsldbgpart/libxsldbg/files.cpp:1184
msgid "Invalid encoding %1.\n"
msgstr "Felaktig kodning %1.\n"

#: kxsldbgpart/libxsldbg/files.cpp:1245
msgid " ----- more ---- \n"
msgstr " ----- mer ---- \n"

#: kxsldbgpart/libxsldbg/files.cpp:1363
msgid "Error: Unable to convert %1 to local file name.\n"
msgstr "Fel: Kan inte konvertera %1 till lokalt filnamn.\n"

#: kxsldbgpart/libxsldbg/files_unix.cpp:68
msgid "Error: USER environment variable is not set.\n"
msgstr "Fel: Miljövariabeln USER är inte inställd.\n"

#: kxsldbgpart/libxsldbg/files_unix.cpp:200
msgid ""
"Error: The value of the option docspath or searchresultspath is empty. See "
"help on setoption or options command for more information.\n"
msgstr ""
"Fel: Värdet på väljaren docspath eller searchresultpath är tomt. Se hjälp om "
"att ställa in väljare eller väljarkommandon för mer information.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:59
#: kxsldbgpart/libxsldbg/help_unix.cpp:64
msgid "xsldbg version"
msgstr "Version av xsldbg"

#: kxsldbgpart/libxsldbg/help_unix.cpp:60
#: kxsldbgpart/libxsldbg/help_unix.cpp:65
msgid "Help document version"
msgstr "Version av hjälpdokumentation"

#: kxsldbgpart/libxsldbg/help_unix.cpp:61
#: kxsldbgpart/libxsldbg/help_unix.cpp:66
msgid "Help not found for command"
msgstr "Hjälp hittades inte för kommando"

#: kxsldbgpart/libxsldbg/help_unix.cpp:98
msgid ""
"Error: Unable to display help. Help files not found in %1 or xsldbg not "
"found in path.\n"
msgstr ""
"Fel: Kan inte visa hjälp. Hjälpfiler hittades inte i %1, eller hittades inte "
"XSL-felsökaren i sökvägen.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:100
msgid "Error: Unable to find xsldbg or help files.\n"
msgstr "Fel: Kan inte hitta XSL-felsökaren eller hjälpfiler.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:105
msgid "Error: Unable to print help file.\n"
msgstr "Fel: Kan inte skriva ut hjälpfil.\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:110
msgid "Error: No path to documentation; aborting help.\n"
msgstr "Fel: Ingen sökväg till dokumentationen. Avbryter hjälp.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:140
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:243
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:383
msgid "Error: XPath %1 results in an empty Node Set.\n"
msgstr "Fel: XPath %1 orsakar en noduppsättning som är tom.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:175
msgid ""
"Information: Temporarily setting document's encoding to UTF-8. Previously "
"was %1.\n"
msgstr ""
"Information: Ställer tillfälligt om dokumentets kodning till UTF-8. Tidigare "
"var den %1.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:229
msgid "Error: Unable to save temporary results to %1.\n"
msgstr "Fel: Kan inte spara tillfälliga resultat i %1.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:251
msgid "NULL string value supplied."
msgstr "Strängvärdet som angavs var NULL."

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:262
msgid "Unable to convert XPath to string."
msgstr "Kan inte konvertera XPath till en sträng."

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:358
msgid ""
"Warning: Unable to print expression. No stylesheet was properly loaded.\n"
msgstr ""
"Varning: Kan inte skriva ut uttryck. Ingen stilmall har laddats på ett "
"riktigt sätt.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:418
msgid " Global %1\n"
msgstr " Global %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:421
msgid " Global "
msgstr " Global "

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:424
msgid " Global = %1\n"
msgstr " Global = %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:427
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
msgid ""
" Global = %1\n"
"%2"
msgstr ""
" Global = %1\n"
"%2"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid "Warning: No value assigned to variable.\n"
msgstr "Varning: Inget värde tilldelat till variabel.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:483
msgid ""
"Error: Debugger has no files loaded or libxslt has not reached a template.\n"
"Try reloading files or taking more steps.\n"
msgstr ""
"Fel: Felsökaren har inte laddat några filer, eller libxslt har inte nått en "
"mall.\n"
"Försök att ladda om filerna eller utföra flera steg.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:520
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping to a "
"template.\n"
msgstr ""
"Fel: Libxslt har inte initierat variabler ännu. Försök att stega till en "
"mall.\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:556
#, c-format
msgid " Local %1"
msgstr " Lokal %1"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:559
msgid " Local "
msgstr " Lokal "

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:562
msgid " Local = %1\n"
msgstr " Lokal = %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:565
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid ""
" Local = %1\n"
"%2"
msgstr ""
" Lokal = %1\n"
"%2"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:583
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping past the xsl:"
"param elements in the template.\n"
msgstr ""
"Fel: Libxslt har inte initierat variabler ännu. Försök att stega förbi "
"elementen xsl:param i mallen.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:73
#: kxsldbgpart/libxsldbg/option_cmds.cpp:107
msgid "Error: Unable to parse %1 as an option value.\n"
msgstr "Fel: Kan inte tolka %1 som ett alternativvärde.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:110
msgid "Error: Unknown option name %1.\n"
msgstr "Fel: Okänt alternativnamn %1.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:146
msgid "Option %1 = %2\n"
msgstr "Alternativ %1 = %2\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:157
msgid "Option %1 = \"%2\"\n"
msgstr "Alternativ %1 = \"%2\"\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:159
msgid "Option %1 = \"\"\n"
msgstr "Alternativ %1 = \"\"\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:230
msgid "\tNo expression watches set.\n"
msgstr "\tInga bevakningar av uttryck inställda.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:237
msgid " WatchExpression %1 "
msgstr " Bevakat uttryck %1 "

#: kxsldbgpart/libxsldbg/option_cmds.cpp:263
msgid ""
"Error: Unable to add watch expression \"%1\". It already has been added or "
"it cannot be watched.\n"
msgstr ""
"Fel: Kan inte lägga till bevakning av uttrycket \"%1\". Det har redan lagts "
"till eller kan inte bevakas.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:287
msgid "Error: Unable to parse %1 as a watchID.\n"
msgstr "Fel: Kan inte tolka %1 som ett bevaknings-id.\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:292
msgid "Error: Watch expression %1 does not exist.\n"
msgstr "Fel: Bevakat uttryck %1 finns inte.\n"

#: kxsldbgpart/libxsldbg/options.cpp:297 kxsldbgpart/libxsldbg/options.cpp:327
msgid "Error: Option %1 is not a valid boolean/integer option.\n"
msgstr ""
"Fel: Alternativet %1 är inte ett giltigt Booleanskt eller "
"heltalsalternativ.\n"

#: kxsldbgpart/libxsldbg/options.cpp:369 kxsldbgpart/libxsldbg/options.cpp:400
msgid "Error: Option %1 is not a valid string xsldbg option.\n"
msgstr ""
"Fel: Alternativet %1 är inte ett giltigt strängalternativ för XSL-"
"felsökaren.\n"

#: kxsldbgpart/libxsldbg/options.cpp:512
msgid " Parameter %1 %2=\"%3\"\n"
msgstr " Parameter %1 %2=\"%3\"\n"

#: kxsldbgpart/libxsldbg/options.cpp:547
msgid ""
"\n"
"No parameters present.\n"
msgstr ""
"\n"
"Inga parametrar tillgängliga.\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:73
msgid "Error: No command processor available for shell command \"%1\".\n"
msgstr "Fel: Ingen kommandotolk tillgänglig för skalkommandon \"%1\".\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:78
msgid "Information: Starting shell command \"%1\".\n"
msgstr "Information: Startar skalkommando \"%1\".\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:93
msgid "Information: Finished shell command.\n"
msgstr "Information: Avslutade skalkommando.\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:97
msgid "Error: Unable to run command. System error %1.\n"
msgstr "Fel: Kan inte köra kommando. Systemfel %1.\n"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:48
msgid "Failed to add parameter"
msgstr "Misslyckades lägga till parameter"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:96
msgid "Failed to delete parameter"
msgstr "Misslyckades ta bort parameter"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:112
msgid "Error: Unable to find parameter %1.\n"
msgstr "Fel: Kan inte hitta parametern %1.\n"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:146
msgid "Unable to print parameters"
msgstr "Kan inte skriva ut parametrar"

#: kxsldbgpart/libxsldbg/search.cpp:414
msgid ""
"Error: Unable to write search Database to file %1. Try setting the "
"\"searchresultspath\" option to a writable path.\n"
msgstr ""
"Fel: Kan inte skriva sökdatabasen till filen %1. Försök att ställa in "
"alternativet \"searchresultspath\" till en skrivbar sökväg.\n"

#: kxsldbgpart/libxsldbg/search.cpp:489
msgid "Information: Transformed %1 using %2 and saved to %3.\n"
msgstr "Information: Transformerade %1 med %2 och sparade i %3.\n"

#: kxsldbgpart/libxsldbg/search.cpp:730
msgid "Error: XSLT template named \"%1\" was not found.\n"
msgstr "Fel: XSLT-mallen med namnet \"%1\" hittades inte.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:52
msgid "Error: No path to documentation; aborting searching.\n"
msgstr "Fel: Ingen sökväg till dokumentationen. Avbryter sökning.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:54
msgid "Error: Error in value of USE_DOCS_MACRO; look at Makefile.am.\n"
msgstr "Fel: Fel i värdet på USE_DOCS_MACRO. Titta i Makefile.am.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:56
msgid ""
"Error: Required environment variable %1 not set to the directory of xsldbg "
"documentation.\n"
msgstr ""
"Fel: Nödvändig miljövariabel %1 är inte inställd till katalogen för XSL-"
"felsökarens dokumentation.\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:62
msgid "Error: Stylesheet not valid, files not loaded yet?\n"
msgstr "Fel: Stilmallen är inte giltig. Har filer inte laddats än?\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:135
msgid " template: \"%1\" mode: \"%2\" in file \"%3\" at line %4\n"
msgstr " mall: \"%1\" läge: \"%2\" i filen \"%3\" på rad %4\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:184
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:36
msgid "Error: Stylesheet is not valid.\n"
msgstr "Fel: Stilmallen är inte giltig.\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:226
msgid "\tNo XSLT templates found.\n"
msgstr "\tInga XSLT-mallar hittades.\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:228
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template found\n"
"\tTotal of %n XSLT templates found"
msgstr ""
"\tTotalt %n XSLT-mall hittades\n"
"\tTotalt %n XSLT-mallar hittades"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:229
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template printed\n"
"\tTotal of %n XSLT templates printed"
msgstr ""
"\tTotalt %n XSLT-mall utskriven\n"
"\tTotalt %n XSLT-mallar utskrivna"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:261
#: kxsldbgpart/libxsldbg/template_cmds.cpp:290
msgid " Stylesheet %1\n"
msgstr " Stilmall %1\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:325
#, c-format
msgid ""
"_n: \tTotal of %n XSLT stylesheet found.\n"
"\tTotal of %n XSLT stylesheets found."
msgstr ""
"\tTotalt %n XSLT-stilmall hittades.\n"
"\tTotalt %n XSLT-stilmallar hittades."

#: kxsldbgpart/libxsldbg/template_cmds.cpp:328
msgid "\tNo XSLT stylesheets found.\n"
msgstr "\tIngen XSLT-stilmall hittades.\n"

#: kxsldbgpart/libxsldbg/trace_cmds.cpp:69
msgid "Warning: Assuming normal speed.\n"
msgstr "Varning: Antar normal hastighet.\n"

#: kxsldbgpart/libxsldbg/utils.cpp:111
msgid "Error: Unmatched quotes in input.\n"
msgstr "Fel: Citationstecken i indata passar inte ihop.\n"

#: kxsldbgpart/libxsldbg/variable_cmds.cpp:99
msgid ""
"Error: Cannot change a variable that does not use the select attribute.\n"
msgstr "Fel: Kan inte ändra en variabel som inte använder egenskapen select.\n"

#: kxsldbgpart/libxsldbg/variable_cmds.cpp:102
msgid "Error: Variable %1 was not found.\n"
msgstr "Fel: Variabeln %1 hittades inte.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:268 kxsldbgpart/libxsldbg/xsldbg.cpp:296
#: kxsldbgpart/libxsldbg/xsldbg.cpp:318
msgid "%1 took %2 ms to complete.\n"
msgstr "%1 tog %2 ms att bli färdig.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:359
#, c-format
msgid "XInclude processing %1."
msgstr "Xinclude-behandling %1."

#: kxsldbgpart/libxsldbg/xsldbg.cpp:397 kxsldbgpart/libxsldbg/xsldbg.cpp:444
msgid "Error: Unable to write temporary results to %1.\n"
msgstr "Fel: Kan inte skriva tillfälliga resultat till %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:407
#, c-format
msgid ""
"_n: Applying stylesheet %n time\n"
"Applying stylesheet %n times"
msgstr ""
"Tillämpar stilmall %n gång\n"
"Tillämpar stilmall %n gånger"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:410
msgid "Applying stylesheet"
msgstr "Tillämpar stilmall"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:471 kxsldbgpart/libxsldbg/xsldbg.cpp:489
msgid "Saving result"
msgstr "Sparar resultat"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:474
msgid "Warning: Generating non-standard output XHTML.\n"
msgstr "Varning: Skapar HTML-utmatning som inte följer standarden.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:491
msgid "Warning: Unsupported, non-standard output method %1.\n"
msgstr "Varning: Utmatningsmetod %1 som inte följer standard och inte stöds.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:507
msgid "Running stylesheet and saving result"
msgstr "Kör stilmall och sparar resultat"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:514
msgid "Error: Unable to save results of transformation to file %1.\n"
msgstr "Fel: Kan inte spara omvandlingsresultat i filen %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:556 kxsldbgpart/libxsldbg/xsldbg.cpp:885
#: kxsldbgpart/libxsldbg/xsldbg.cpp:917 kxsldbgpart/libxsldbg/xsldbg.cpp:984
msgid "Fatal error: Aborting debugger due to an unrecoverable error.\n"
msgstr ""
"Allvarligt fel: Avbryter felsökaren på grund av ett fel utan "
"återhämtningsmöjlighet.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:681
msgid ""
"Warning: Too many libxslt parameters provided via the command line option --"
"param.\n"
msgstr ""
"Varning: För många libxslt-argument tillhandahölls via kommandoradens "
"väljare --param.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:690
msgid ""
"Error: Argument \"%1\" to --param is not in the format <name>:<value>.\n"
msgstr ""
"Fel: Argumentet \"%1\" till --param har inte formatet <namn>:<värde>.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:742
msgid ""
"\n"
"Starting stylesheet\n"
"\n"
msgstr ""
"\n"
"Startar stilmall\n"
"\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:753
msgid "Error: No XSLT source file supplied.\n"
msgstr "Fel: Ingen XSLT-källkodsfil tillhandahållen.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:756
msgid "Error: No XML data file supplied.\n"
msgstr "Fel: Ingen XML-datafil tillhandahållen.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:793
msgid ""
"\n"
"Debugger never received control.\n"
msgstr ""
"\n"
"Felsökaren tog aldrig emot kontroll.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:798
msgid ""
"\n"
"Finished stylesheet\n"
"\n"
msgstr ""
"\n"
"Stilmall klar\n"
"\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:855
msgid ""
"Going to the command shell; not all xsldbg commands will work as not all "
"needed have been loaded.\n"
msgstr ""
"Går till kommandoskalet. Alla kommandon i XSL-felsökaren fungerar inte "
"eftersom inte allt som behövs har laddats.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:912
#, c-format
msgid "Parsing stylesheet %1"
msgstr "Tolkar stilmall %1"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:914
msgid "Error: Cannot parse file %1.\n"
msgstr "Fel: Kan inte tolka filen %1.\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:982 kxsldbgpart/libxsldbg/xsldbg.cpp:1026
msgid "Error: Unable to parse file %1.\n"
msgstr "Fel: Kan inte tolka filen %1.\n"

#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:38
#: kxsldbgpart/xsldbgbreakpoints.ui:81
#, no-c-format
msgid "Enabled"
msgstr "Aktiverad"

#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:40
msgid "Disabled"
msgstr "Inaktiverad"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:83
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:92
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:115
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:120
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:143
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:148 kxsldbgpart/xsldbgdebugger.cpp:297
#: kxsldbgpart/xsldbgdebugger.cpp:317 kxsldbgpart/xsldbgdebugger.cpp:335
#: kxsldbgpart/xsldbgdebugger.cpp:355 kxsldbgpart/xsldbgdebugger.cpp:375
#: kxsldbgpart/xsldbgdebugger.cpp:394
msgid "Operation Failed"
msgstr "Åtgärden misslyckades"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:84
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:116
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:144
msgid "A line number was provided without a file name."
msgstr "Ett radnummer angavs utan filnamn."

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:93
msgid "No details provided or an invalid line number was supplied."
msgstr "Ingen information eller ett felaktigt radnummer angiven."

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:121
msgid "No details provided or an invalid line or ID was supplied."
msgstr "Ingen information, eller en felaktig rad eller ID, angiven."

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:149
msgid "No details provided."
msgstr "Ingen information angiven."

#: kxsldbgpart/xsldbgconfigimpl.cpp:191
msgid "\t\"XSL source\" \n"
msgstr "\t\"XSL-källkod:\" \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:193
msgid "\t\"XML data\" \n"
msgstr "\t\"XML-data:\" \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:195
msgid "\t\"Output file\" \n"
msgstr "\t\"Utmatningsfil:\" \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:197
msgid "Missing values for \n"
msgstr "Värden saknas för \n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:201
msgid "Output file is the same as either XSL Source or XML Data file\n"
msgstr "Utmatningsfil är samma som XSL-källkoden eller XML-datafilen\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:220
msgid ""
"The following libxslt parameters are empty\n"
"\t"
msgstr ""
"Följande libxslt-parametrar är tomma\n"
"\t"

#: kxsldbgpart/xsldbgconfigimpl.cpp:370
msgid "Choose XSL Source to Debug"
msgstr "Välj XSL-källkod att felsöka"

#: kxsldbgpart/xsldbgconfigimpl.cpp:382
msgid "Choose XML Data to Debug"
msgstr "Välj XML-data att felsöka"

#: kxsldbgpart/xsldbgconfigimpl.cpp:393
msgid "Choose Output File for XSL Transformation"
msgstr "Välj utmatningsfil för XSL-omvandling"

#: kxsldbgpart/xsldbgconfigimpl.cpp:484
msgid "Suspect Configuration"
msgstr "Misstänk inställning"

#: kxsldbgpart/xsldbgconfigimpl.cpp:488
msgid "Incomplete or Invalid Configuration"
msgstr "Ofullständig eller ogiltig inställning"

#: kxsldbgpart/xsldbgdebugger.cpp:298 kxsldbgpart/xsldbgdebugger.cpp:318
#: kxsldbgpart/xsldbgdebugger.cpp:336 kxsldbgpart/xsldbgdebugger.cpp:356
#: kxsldbgpart/xsldbgdebugger.cpp:376 kxsldbgpart/xsldbgdebugger.cpp:395
msgid "Cannot set/edit breakpoints on the output file."
msgstr "Kan inte sätta eller redigera brytpunkter i utmatningsfilen."

#: kxsldbgpart/xsldbginspector.cpp:68
msgid "Xsldbg Inspector"
msgstr "XSL-felsökare inspektör"

#: kxsldbgpart/xsldbginspector.cpp:77
msgid "Breakpoints"
msgstr "Brytpunkter"

#: kxsldbgpart/xsldbginspector.cpp:83
msgid "Variables"
msgstr "Variabler"

#: kxsldbgpart/xsldbginspector.cpp:89
msgid "CallStack"
msgstr "Anropsstack"

#: kxsldbgpart/xsldbginspector.cpp:95
msgid "Templates"
msgstr "Mallar"

#: kxsldbgpart/xsldbginspector.cpp:101
msgid "Sources"
msgstr "Källkod"

#: kxsldbgpart/xsldbginspector.cpp:107
msgid "Entities"
msgstr "Instanser"

#: kxsldbgpart/xsldbginspector.cpp:126
msgid "Apply changes to xsldbg after restarting execution"
msgstr "Tillämpa ändringar i XSL-felsökaren efter omstart av körning"

#: kxsldbgpart/xsldbginspector.cpp:133
msgid "&Refresh"
msgstr "Uppdate&ra"

#: kxsldbgpart/xsldbginspector.cpp:134
msgid "Refresh values in inspectors from xsldbg"
msgstr "Uppdatera värden i inspektörer från XSL-felsökaren"

#: kxsldbgpart/xsldbglocallistitem.cpp:32
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:71
msgid "Local"
msgstr "Lokal"

#: kxsldbgpart/xsldbglocallistitem.cpp:34
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:73
msgid "Global"
msgstr "Global"

#: kxsldbgpart/xsldbgoutputview.cpp:61
msgid "xsldbg Output"
msgstr "XSL-felsökare utmatning"

#: kxsldbgpart/xsldbgoutputview.cpp:62
msgid ""
"\t\txsldbg output capture ready\n"
"\n"
msgstr ""
"\t\tVisning av XSL-felsökarens utmatning klar\n"
"\n"

#: kxsldbgpart/xsldbgoutputview.cpp:76
msgid "Result of evaluation"
msgstr "Resultat av utvärdering"

#: kxsldbgpart/xsldbgoutputview.cpp:93
msgid "Request Failed "
msgstr "Begäran misslyckades "

#: main.cpp:9
msgid "A TDE KPart Application for xsldbg, an XSLT debugger"
msgstr "TDE-delprogram för xsldbg, en XSLT-felsökare"

#: main.cpp:14 xsldbgmain.cpp:97
msgid "XSL script to run"
msgstr "XSL-skript att köra"

#: main.cpp:15 xsldbgmain.cpp:98
msgid "XML data to be transformed"
msgstr "XML-data att transformera"

#: main.cpp:16
msgid "File to save results to"
msgstr "Fil att spara resultat i"

#: main.cpp:22
msgid "KXSLDbg"
msgstr "KXSL-felsökare"

#: xsldbgmain.cpp:51
msgid "A TDE console application for xsldbg, an XSLT debugger"
msgstr "Ett TDE terminalprogram för xsldbg, en XSLT-felsökare"

#: xsldbgmain.cpp:57
msgid "Start a shell"
msgstr "Starta ett skal"

#: xsldbgmain.cpp:58
msgid "Path to change into before loading files"
msgstr "Sökväg att byta till innan filer laddas"

#: xsldbgmain.cpp:59
msgid "Add a parameter named <name> and value <value> to XSL environment"
msgstr ""
"Lägg till en parameter vid namn <namn> och med värdet <värde> i XSL-miljön"

#: xsldbgmain.cpp:60
msgid "Use ISO 639 language code specified; for example en_US"
msgstr "Använd angiven ISO 639 språkkod, till exempel sv"

#: xsldbgmain.cpp:60
msgid "Save to a given file. See output command documentation"
msgstr "Spara i en angiven fil. Se dokumentationen för utmatningskommandot."

#: xsldbgmain.cpp:61
msgid "Show the version of libxml and libxslt used"
msgstr "Visa version av libxml och libxslt som används"

#: xsldbgmain.cpp:62
msgid "Show logs of what is happening"
msgstr "Visa loggar av vad som händer"

#: xsldbgmain.cpp:63
msgid "Display the time used"
msgstr "Visa tiden som används"

#: xsldbgmain.cpp:64
msgid "Run the transformation 20 times"
msgstr "Kör transformationen 20 gånger"

#: xsldbgmain.cpp:66
msgid "Dump the tree of the result instead"
msgstr "Mata ut resultatträdet istället"

#: xsldbgmain.cpp:68
msgid "Disable the DTD loading phase"
msgstr "Inaktivera DTD-laddningsfasen"

#: xsldbgmain.cpp:69
msgid "Disable the output of the result"
msgstr "Inaktivera utmatning av resultatet"

#: xsldbgmain.cpp:70
msgid "Increase the maximum depth"
msgstr "Öka maximalt djup"

#: xsldbgmain.cpp:73
msgid "The input document is(are) an HTML file(s)"
msgstr "Indata-dokumenten är HTML-filer"

#: xsldbgmain.cpp:77
msgid "The input document is SGML docbook"
msgstr "Indata-dokumenten är SGML-docbook"

#: xsldbgmain.cpp:80
msgid "Disable the fetching DTDs or entities over network"
msgstr "Inaktivera hämtning av DTD:er eller instanser via nätverk"

#: xsldbgmain.cpp:83
msgid "Use the catalogs from $SGML_CATALOG_FILES"
msgstr "Använd kataloger från $SGML_CATALOGS_FILES"

#: xsldbgmain.cpp:87
msgid "Disable XInclude processing on document input"
msgstr "Inaktivera Xinclude-behandling för dokumentindata"

#: xsldbgmain.cpp:90
msgid "Print profiling informations"
msgstr "Skriv ut profileringsinformation"

#: xsldbgmain.cpp:91
msgid "Do not run gdb compatability mode and print less information"
msgstr ""
"Kör inte läge som fungerar ihop med gdb, och skriv ut mindre information"

#: xsldbgmain.cpp:92
msgid "Detect and use encodings in the stylesheet"
msgstr "Detektera och använd kodning i stilmallen"

#: xsldbgmain.cpp:93
msgid "Treat command line input as encoded in UTF-8"
msgstr "Behandla indata från kommandoraden som kodat med UTF-8"

#: xsldbgmain.cpp:94
msgid "Use HTML output when generating search reports"
msgstr "Använd HTML-utmatning när sökrapporter skapas"

#: xsldbgmain.cpp:95
msgid ""
"Print all error messages to stdout, normally error messages go to stderr"
msgstr ""
"Skriv ut alla felmeddelanden på standardutmatningen. Normalt skrivs "
"felmeddelanden ut på standardfelutmatningen."

#: xsldbgmain.cpp:96
msgid ""
"Disable the automatic restarting of execution when current processing pass "
"is complete"
msgstr ""
"Inaktivera automatisk omstart av körning när den nuvarande "
"behandlingsomgången är färdig"

#: xsldbgmain.cpp:124
msgid "Using libxml %1, libxslt %2 and libexslt %3\n"
msgstr "Använder libxml %1, libxslt %2 och libexslt %3\n"

#: xsldbgmain.cpp:125
msgid "xsldbg was compiled against libxml %1, libxslt %2 and libexslt %3\n"
msgstr "xsldbg kompilerades för libxml %1, libxslt %2 och libexslt %3\n"

#: xsldbgmain.cpp:126
msgid "libxslt %1 was compiled against libxml %2\n"
msgstr "libxslt %1 kompilerades för libxml %2\n"

#: xsldbgmain.cpp:127
msgid "libexslt %1 was compiled against libxml %2\n"
msgstr "libexslt %1 kompilerades för libxml %2\n"

#: xsldbgmain.cpp:130
msgid "Xsldbg"
msgstr "Xsldbg"

#: kxsldbg_shell.rc:9 kxsldbgpart/kxsldbg_part.rc:4
#, no-c-format
msgid "Debug"
msgstr "Felsök"

#: kxsldbgpart/xsldbgbreakpoints.ui:17
#, no-c-format
msgid "Xsldbg Breakpoints"
msgstr "XSL-felsökare brytpunkter"

#: kxsldbgpart/xsldbgbreakpoints.ui:26
#, no-c-format
msgid "ID"
msgstr "Id"

#: kxsldbgpart/xsldbgbreakpoints.ui:37 kxsldbgpart/xsldbgglobalvariables.ui:40
#: kxsldbgpart/xsldbglocalvariables.ui:150 kxsldbgpart/xsldbgtemplates.ui:32
#, no-c-format
msgid "Name"
msgstr "Namn"

#: kxsldbgpart/xsldbgbreakpoints.ui:48 kxsldbgpart/xsldbgtemplates.ui:43
#, no-c-format
msgid "Mode"
msgstr "Läge"

#: kxsldbgpart/xsldbgbreakpoints.ui:59
#, no-c-format
msgid "File Name"
msgstr "Filnamn"

#: kxsldbgpart/xsldbgbreakpoints.ui:70 kxsldbgpart/xsldbgcallstack.ui:54
#: kxsldbgpart/xsldbgtemplates.ui:65
#, no-c-format
msgid "Line Number"
msgstr "Radnummer"

#: kxsldbgpart/xsldbgbreakpoints.ui:102
#, no-c-format
msgid "Click breakpoint in list to modify or delete it"
msgstr "Klicka på brytpunktslistan för att ändra eller ta bort den"

#: kxsldbgpart/xsldbgbreakpoints.ui:138
#, no-c-format
msgid "ID:"
msgstr "Id:"

#: kxsldbgpart/xsldbgbreakpoints.ui:146
#, no-c-format
msgid "Line number:"
msgstr "Radnummer:"

#: kxsldbgpart/xsldbgbreakpoints.ui:154
#, no-c-format
msgid "You don't need to specify directory for file name"
msgstr "Du behöver inte ange katalog för filnamn"

#: kxsldbgpart/xsldbgbreakpoints.ui:162
#, no-c-format
msgid "Template name or match name to look for"
msgstr "Mallnamn eller matchande namn att söka efter"

#: kxsldbgpart/xsldbgbreakpoints.ui:198 kxsldbgpart/xsldbgbreakpoints.ui:253
#, no-c-format
msgid "Must be positive"
msgstr "Måste vara positiv"

#: kxsldbgpart/xsldbgbreakpoints.ui:285
#, no-c-format
msgid "Mode:"
msgstr "Läge:"

#: kxsldbgpart/xsldbgbreakpoints.ui:293
#, no-c-format
msgid "Name:"
msgstr "Namn:"

#: kxsldbgpart/xsldbgbreakpoints.ui:301
#, no-c-format
msgid "File name:"
msgstr "Filnamn:"

#: kxsldbgpart/xsldbgbreakpoints.ui:375
#, no-c-format
msgid "Delete breakpoint using ID"
msgstr "Ta bort brytpunkt med id"

#: kxsldbgpart/xsldbgbreakpoints.ui:386
#, no-c-format
msgid "Clear entered text"
msgstr "Rensa inmatad text"

#: kxsldbgpart/xsldbgbreakpoints.ui:394
#, no-c-format
msgid "Add All"
msgstr "Lägg till alla"

#: kxsldbgpart/xsldbgbreakpoints.ui:397
#, no-c-format
msgid "Add breakpoint on all templates found"
msgstr "Lägg till brytpunkt för alla mallar som hittats"

#: kxsldbgpart/xsldbgbreakpoints.ui:408
#, no-c-format
msgid "Delete all breakpoints"
msgstr "Ta bort alla brytpunkter"

#: kxsldbgpart/xsldbgbreakpoints.ui:416
#, no-c-format
msgid "Enable"
msgstr "Aktivera"

#: kxsldbgpart/xsldbgbreakpoints.ui:419
#, no-c-format
msgid "Enable breakpoint using ID"
msgstr "Aktivera brytpunkt med id"

#: kxsldbgpart/xsldbgbreakpoints.ui:430
#, no-c-format
msgid "Add breakpoint using file name with line number or a template name"
msgstr "Lägg till brytpunkt med filnamn med radnummer eller mallnamn"

#: kxsldbgpart/xsldbgbreakpoints.ui:488 kxsldbgpart/xsldbgcallstack.ui:114
#: kxsldbgpart/xsldbgentities.ui:125 kxsldbgpart/xsldbgglobalvariables.ui:229
#: kxsldbgpart/xsldbglocalvariables.ui:324 kxsldbgpart/xsldbgsources.ui:111
#, no-c-format
msgid "Refresh"
msgstr "Uppdatera"

#: kxsldbgpart/xsldbgcallstack.ui:17
#, no-c-format
msgid "Xsldbg Callstack"
msgstr "XSL-felsökare anropsstack"

#: kxsldbgpart/xsldbgcallstack.ui:32
#, no-c-format
msgid "Frame# Template Name"
msgstr "Ramnummer mallnamn"

#: kxsldbgpart/xsldbgcallstack.ui:43 kxsldbgpart/xsldbgtemplates.ui:54
#, no-c-format
msgid "Source File Name"
msgstr "Källkodsfilnamn"

#: kxsldbgpart/xsldbgcallstack.ui:75
#, no-c-format
msgid "Oldest Frame # is 0, Frame # has been added to the first column"
msgstr "Äldsta ramnumret är 0, ramnumret har lagts till i första kolumnen"

#: kxsldbgpart/xsldbgconfig.ui:31
#, no-c-format
msgid "KXsldbg Configuration"
msgstr "Inställning av XSL-felsökaren"

#: kxsldbgpart/xsldbgconfig.ui:75
#, no-c-format
msgid "LibXSLT Parameters"
msgstr "XSLT-biblioteksparametrar"

#: kxsldbgpart/xsldbgconfig.ui:108
#, no-c-format
msgid "Parameter value:"
msgstr "Parametervärde:"

#: kxsldbgpart/xsldbgconfig.ui:148
#, no-c-format
msgid "Parameter name:"
msgstr "Parameternamn:"

#: kxsldbgpart/xsldbgconfig.ui:229
#, no-c-format
msgid "Prev"
msgstr "Föregående"

#: kxsldbgpart/xsldbgconfig.ui:464
#, no-c-format
msgid "Output file:"
msgstr "Utmatningsfil:"

#: kxsldbgpart/xsldbgconfig.ui:488 kxsldbgpart/xsldbgconfig.ui:536
#: kxsldbgpart/xsldbgconfig.ui:584
#, no-c-format
msgid "..."
msgstr "..."

#: kxsldbgpart/xsldbgconfig.ui:512
#, no-c-format
msgid "XML data:"
msgstr "XML-data:"

#: kxsldbgpart/xsldbgconfig.ui:560
#, no-c-format
msgid "XSL source:"
msgstr "XSL-källkod:"

#: kxsldbgpart/xsldbgconfig.ui:621
#, no-c-format
msgid "catalogs"
msgstr "kataloger"

#: kxsldbgpart/xsldbgconfig.ui:624
#, no-c-format
msgid "use catalogs from $SGML_CATALOGS_FILES"
msgstr "använd kataloger från $SGML_CATALOGS_FILES"

#: kxsldbgpart/xsldbgconfig.ui:632
#, no-c-format
msgid "novalid"
msgstr "ej giltig"

#: kxsldbgpart/xsldbgconfig.ui:635
#, no-c-format
msgid "skip the DTD loading phase"
msgstr "hoppa över DTD-laddningsfas"

#: kxsldbgpart/xsldbgconfig.ui:643
#, no-c-format
msgid "html"
msgstr "HTML"

#: kxsldbgpart/xsldbgconfig.ui:646
#, no-c-format
msgid "the input document is(are) an HTML file(s)"
msgstr "indata-dokumenten är HTML-filer"

#: kxsldbgpart/xsldbgconfig.ui:654
#, no-c-format
msgid "docbook"
msgstr "docbook"

#: kxsldbgpart/xsldbgconfig.ui:657
#, no-c-format
msgid "the input document is SGML docbook"
msgstr "indata-dokumenten är SGML-docbook"

#: kxsldbgpart/xsldbgconfig.ui:665
#, no-c-format
msgid "debug"
msgstr "felsök"

#: kxsldbgpart/xsldbgconfig.ui:668
#, no-c-format
msgid "dump the tree of the result instead"
msgstr "mata ut resultatträdet istället"

#: kxsldbgpart/xsldbgconfig.ui:676
#, no-c-format
msgid "noout"
msgstr "ej utmatning"

#: kxsldbgpart/xsldbgconfig.ui:679
#, no-c-format
msgid "do not dump the result"
msgstr "mata inte ut resultatet"

#: kxsldbgpart/xsldbgconfig.ui:687
#, no-c-format
msgid "profile"
msgstr "profilering"

#: kxsldbgpart/xsldbgconfig.ui:690
#, no-c-format
msgid "print profiling information"
msgstr "skriv ut profileringsinformation"

#: kxsldbgpart/xsldbgconfig.ui:698
#, no-c-format
msgid "timing"
msgstr "tid"

#: kxsldbgpart/xsldbgconfig.ui:701
#, no-c-format
msgid "display the time used"
msgstr "visa tiden som används"

#: kxsldbgpart/xsldbgconfig.ui:709
#, no-c-format
msgid "nonet"
msgstr "ej nätverk"

#: kxsldbgpart/xsldbgconfig.ui:712
#, no-c-format
msgid "refuse to fetch DTDs or entities over network"
msgstr "vägra hämta DTD:er eller instanser via nätverk"

#: kxsldbgpart/xsldbgentities.ui:25
#, no-c-format
msgid "Xsldbg Entities"
msgstr "XSL-felsökare instanser"

#: kxsldbgpart/xsldbgentities.ui:40
#, no-c-format
msgid "PublicID"
msgstr "PublicID"

#: kxsldbgpart/xsldbgentities.ui:51
#, no-c-format
msgid "SystemID"
msgstr "SystemID"

#: kxsldbgpart/xsldbgglobalvariables.ui:25
#, no-c-format
msgid "Xsldbg Global Variables"
msgstr "XSL-felsökare globala variabler"

#: kxsldbgpart/xsldbgglobalvariables.ui:51
#: kxsldbgpart/xsldbglocalvariables.ui:183 kxsldbgpart/xsldbgsources.ui:32
#, no-c-format
msgid "Source File"
msgstr "Källkodsfil"

#: kxsldbgpart/xsldbgglobalvariables.ui:62
#: kxsldbgpart/xsldbglocalvariables.ui:194
#, no-c-format
msgid "Source Line Number"
msgstr "Källkodsradnummer"

#: kxsldbgpart/xsldbgglobalvariables.ui:150
#: kxsldbgpart/xsldbglocalvariables.ui:87
#, no-c-format
msgid "Expression:"
msgstr "Uttryck:"

#: kxsldbgpart/xsldbgglobalvariables.ui:158
#: kxsldbgpart/xsldbglocalvariables.ui:95
#, no-c-format
msgid "Enter a valid XPath expression"
msgstr "Skriv in ett giltigt Xpath-uttryck"

#: kxsldbgpart/xsldbgglobalvariables.ui:188
#: kxsldbgpart/xsldbglocalvariables.ui:125
#, no-c-format
msgid "Result of evaluation will appear in message window"
msgstr "Beräkningens resultat visas i meddelandefönstret"

#: kxsldbgpart/xsldbglocalvariables.ui:25
#, no-c-format
msgid "Xsldbg Local Variables"
msgstr "XSL-felsökare lokala variabler"

#: kxsldbgpart/xsldbglocalvariables.ui:161
#, no-c-format
msgid "Template Context"
msgstr "Mallsammanhang"

#: kxsldbgpart/xsldbglocalvariables.ui:172
#, no-c-format
msgid "Type"
msgstr "Typ"

#: kxsldbgpart/xsldbglocalvariables.ui:228
#, no-c-format
msgid "Variable expression:"
msgstr "Variabeluttryck:"

#: kxsldbgpart/xsldbglocalvariables.ui:249
#, no-c-format
msgid "Variable type:"
msgstr "Variabeltyp:"

#: kxsldbgpart/xsldbglocalvariables.ui:270
#, no-c-format
msgid "Set Expression"
msgstr "Ange uttryck"

#: kxsldbgpart/xsldbglocalvariables.ui:273
#, no-c-format
msgid "Set the selection for variable "
msgstr "Ange valet för en variabel "

#: kxsldbgpart/xsldbglocalvariables.ui:283
#, no-c-format
msgid "Variable name:"
msgstr "Variabelnamn:"

#: kxsldbgpart/xsldbgmsgdialog.ui:26
#, no-c-format
msgid "qxsldbg Message"
msgstr "QXSL-felsökare meddelande"

#: kxsldbgpart/xsldbgmsgdialog.ui:71
#, no-c-format
msgid "TextLabel1"
msgstr "Textläge1"

#: kxsldbgpart/xsldbgsources.ui:17
#, no-c-format
msgid "Xsldbg Source Files"
msgstr "XSL-felsökare källkodsfiler"

#: kxsldbgpart/xsldbgsources.ui:43
#, no-c-format
msgid "Parent File"
msgstr "Överliggande fil"

#: kxsldbgpart/xsldbgsources.ui:54
#, no-c-format
msgid "Parent Line Number"
msgstr "Radnummer i överliggande fil"

#: kxsldbgpart/xsldbgtemplates.ui:17
#, no-c-format
msgid "Xsldbg Templates"
msgstr "XSL-felsökare mallar"

#: kxsldbgpart/xsldbgwalkspeed.ui:17
#, no-c-format
msgid "Configure xsldbg's Walk Speed"
msgstr "Anpassa XSL-felsökarens hastighet"

#: kxsldbgpart/xsldbgwalkspeed.ui:51
#, no-c-format
msgid ""
"Change the speed at which xsldbg walks through execution of the stylesheet."
msgstr "Ändra hastighet som XSL-felsökaren går igenom körningen av stilmallen."

#: kxsldbgpart/xsldbgwalkspeed.ui:95
#, no-c-format
msgid "Slow"
msgstr "Långsam"

#: kxsldbgpart/xsldbgwalkspeed.ui:117
#, no-c-format
msgid "Fast"
msgstr "Snabb"