# translation of kcmkicker.po to zh_CN
# Copyright (C) 2003 Free Software Foundation, Inc.
# Wang Jian <lark@linux.net.cn>, 2000
# Jiang Xiong <jxiong@offtopic.org>, 2002, 2003
# Funda Wang <fundawang@linux.net.cn>, 2004
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-07-27 01:50+0200\n"
"PO-Revision-Date: 2005-06-11 13:56+0800\n"
"Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
"Language-Team: zh_CN <i18n-translation@lists.linux.net.cn>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Translator: Wang Jian <lark@linux.net.cn>\n"
"X-Generator: KBabel 1.0\n"

#: _translatorinfo:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Wang Jian"

#: _translatorinfo:2
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "lark@linux.net.cn"

#: advancedDialog.cpp:36
msgid "Advanced Options"
msgstr "高级选项"

#: applettab_impl.cpp:59
msgid ""
"Panel applets can be started in two different ways: internally or "
"externally. While 'internally' is the preferred way to load applets, this "
"can raise stability or security problems when you are using poorly-"
"programmed third-party applets. To address these problems, applets can be "
"marked 'trusted'. You might want to configure Kicker to treat trusted "
"applets differently to untrusted ones; your options are: <ul><li><em>Load "
"only trusted applets internally:</em> All applets but the ones marked "
"'trusted' will be loaded using an external wrapper application.</li> "
"<li><em>Load startup config applets internally:</em> The applets shown on "
"TDE startup will be loaded internally, others will be loaded using an "
"external wrapper application.</li> <li><em>Load all applets internally</em></"
"li></ul>"
msgstr ""
"面板小程序可以以两种不同的方式启动：内部或外部。虽然“内部”是首选的启动小程序"
"的方法，但当您使用编写得很差的第三方小程序时，会产生稳定或安全问题。为了解决"
"这些问题，小程序可以被标为“受信任的”。您也许要配置 Kicker 以不同于“不受信任"
"的”小程序的方式对待“受信任的”小程序。您的选择是：<ul><li><em>仅内部载入受信任"
"的小程序：</em>没有标记为“受信任的”的小程序将通过外部的包装程序载入。</"
"li><li><em>内部载入启动配置小程序：</em>内部载入显示在 TDE 启动项上的小程序，"
"其它的将通过外部包装程序载入。</li><li><em>内部载入所有的小程序</em></li></"
"ul>"

#: applettab_impl.cpp:70
msgid ""
"Here you can see a list of applets that are marked 'trusted', i.e. will be "
"loaded internally by Kicker in any case. To move an applet from the list of "
"available applets to the trusted ones, or vice versa, select it and press "
"the left or right buttons."
msgstr ""
"您可以在此看到标为“信任的”(即在任何情况下都被 kicker 内部载入)小程序的列表。"
"如果要从可用的小程序列表中移动一个小程序到“受信任的”列表，或者相反，可选中它"
"后按左或右按钮。"

#: applettab_impl.cpp:75
msgid ""
"Click here to add the selected applet from the list of available, untrusted "
"applets to the list of trusted applets."
msgstr "单击这里将选中的可用但不受信任的小程序添加到受信任的小程序列表中。"

#: applettab_impl.cpp:78
msgid ""
"Click here to remove the selected applet from the list of trusted applets to "
"the list of available, untrusted applets."
msgstr ""
"单击这里将选中的小程序从受信任小程序列表中删除，并移到可用的但不受信任的小程"
"序的列表中。"

#: applettab_impl.cpp:81
msgid ""
"Here you can see a list of available applets that you currently do not "
"trust. This does not mean you cannot use those applets, but rather that the "
"panel's policy using them depends on your applet security level. To move an "
"applet from the list of available applets to the trusted ones or vice versa, "
"select it and press the left or right buttons."
msgstr ""
"您可以看到当前您不信任的可用的小程序的列表。这不是说您不能使用这些小程序，而"
"是面板使用它们的策略依赖于您设置的小程序安全级别。要从可用的小程序列表中移动"
"一个小程序到“受信任的”列表，或者相反，选中它后按左或右按钮。"

#: extensionInfo.cpp:45
msgid "Main Panel"
msgstr "主面板"

#: hidingtab.ui:385 hidingtab_impl.cpp:222
#, no-c-format
msgid "Show left panel-hiding bu&tton"
msgstr "显示左面板的隐藏按钮(&T)"

#: hidingtab_impl.cpp:223
msgid "Show right panel-hiding bu&tton"
msgstr "显示右面板的隐藏按钮(&B)"

#: hidingtab_impl.cpp:227
msgid "Show top panel-hiding bu&tton"
msgstr "显示上面板的隐藏按钮(&T)"

#: hidingtab_impl.cpp:228
msgid "Show bottom panel-hiding bu&tton"
msgstr "显示下面板的隐藏按钮(&T)"

#: lookandfeeltab_impl.cpp:67
msgid "Select Image File"
msgstr "选择图像文件"

#: lookandfeeltab_impl.cpp:144
msgid ""
"Error loading theme image file.\n"
"\n"
"%1\n"
"%2"
msgstr ""
"载入主题图像文件时发生错误。\n"
"\n"
"%1\n"
"%2"

#: lookandfeeltab_kcm.cpp:36 main.cpp:358
msgid "kcmkicker"
msgstr "kcmkicker"

#: lookandfeeltab_kcm.cpp:36 main.cpp:359
msgid "TDE Panel Control Module"
msgstr "TDE 面板控制模块"

#: lookandfeeltab_kcm.cpp:38
msgid ""
"(c) 1999 - 2001 Matthias Elter\n"
"(c) 2002 Aaron J. Seigo"
msgstr ""
"(C) 1999 - 2001 Matthias Elter\n"
"(c) 2002 Aaron J. Seigo"

#: lookandfeeltab_kcm.cpp:86 main.cpp:345
msgid ""
"<h1>Panel</h1> Here you can configure the TDE panel (also referred to as "
"'kicker'). This includes options like the position and size of the panel, as "
"well as its hiding behavior and its looks.<p> Note that you can also access "
"some of these options directly by clicking on the panel, e.g. dragging it "
"with the left mouse button or using the context menu on right mouse button "
"click. This context menu also offers you manipulation of the panel's buttons "
"and applets."
msgstr ""
"<h1>面板</h1>您可以配置 TDE 面板(也称为“kicker”)。这包括面板的位置和大小选"
"项，还有它的自动隐藏行为和外观。<p> 注意您也可以通过直接点击面板(例如用鼠标左"
"键拖动它，或使用右键的即时菜单)来访问这些选项。该即时菜单也可以让您控制面板的"
"按钮和小程序。"

#: main.cpp:361
#, fuzzy
msgid ""
"(c) 2009 - 2014 Timothy Pearson\n"
"(c) 1999 - 2001 Matthias Elter\n"
"(c) 2002 - 2003 Aaron J. Seigo"
msgstr ""
"(c) 1999 - 2001 Matthias Elter\n"
"(c) 2002 - 2003 Aaron J. Seigo"

#: menutab_impl.cpp:134
msgid "Quick Browser"
msgstr "快捷浏览"

#: menutab_impl.cpp:325
msgid ""
"The TDE menu editor (kmenuedit) could not be launched.\n"
"Perhaps it is not installed or not in your path."
msgstr ""
"TDE 菜单编辑器 (kmenuedit) 无法启动。\n"
"可能它没有安装或者不在您的执行路径上。"

#: menutab_impl.cpp:327
msgid "Application Missing"
msgstr "程序找不到"

#: positiontab_impl.cpp:77 positiontab_impl.cpp:92
msgid "Top left"
msgstr "顶边偏左"

#: positiontab_impl.cpp:78 positiontab_impl.cpp:93
msgid "Top center"
msgstr "顶边中间"

#: positiontab_impl.cpp:79 positiontab_impl.cpp:94
msgid "Top right"
msgstr "顶边偏右"

#: positiontab_impl.cpp:80 positiontab_impl.cpp:95
msgid "Left top"
msgstr "左边偏上"

#: positiontab_impl.cpp:81 positiontab_impl.cpp:96
msgid "Left center"
msgstr "左边中间"

#: positiontab_impl.cpp:82 positiontab_impl.cpp:97
msgid "Left bottom"
msgstr "左边偏下"

#: positiontab_impl.cpp:83 positiontab_impl.cpp:98
msgid "Bottom left"
msgstr "下边偏左"

#: positiontab_impl.cpp:84 positiontab_impl.cpp:99
msgid "Bottom center"
msgstr "下边中间"

#: positiontab_impl.cpp:85 positiontab_impl.cpp:100
msgid "Bottom right"
msgstr "下边偏右"

#: positiontab_impl.cpp:86 positiontab_impl.cpp:101
msgid "Right top"
msgstr "右边偏上"

#: positiontab_impl.cpp:87 positiontab_impl.cpp:102
msgid "Right center"
msgstr "右边中间"

#: positiontab_impl.cpp:88 positiontab_impl.cpp:103
msgid "Right bottom"
msgstr "右边偏下"

#: positiontab_impl.cpp:116
msgid "All Screens"
msgstr "全部屏幕"

#: positiontab.ui:412 positiontab_impl.cpp:535
#, no-c-format
msgid "Custom"
msgstr "自定义"

#: ../../kicker/data/tiles:1
#, fuzzy
msgid "KDE Button"
msgstr "TDE 按钮"

#: ../../kicker/data/tiles:2
msgid "Blue Wood"
msgstr "蓝木纹"

#: ../../kicker/data/tiles:3
msgid "Green Wood"
msgstr "绿木纹"

#: ../../kicker/data/tiles:4
msgid "Light Gray"
msgstr "淡灰"

#: ../../kicker/data/tiles:5
msgid "Light Green"
msgstr "淡绿"

#: ../../kicker/data/tiles:6
msgid "Light Pastel"
msgstr "淡彩蜡笔画"

#: ../../kicker/data/tiles:7
msgid "Light Purple"
msgstr "淡紫"

#: ../../kicker/data/tiles:8
msgid "Nuts And Bolts"
msgstr "螺母和螺栓"

#: ../../kicker/data/tiles:9
msgid "Red Wood"
msgstr "红木纹"

#: ../../kicker/data/tiles:10
msgid "Solid Blue"
msgstr "蓝色"

#: ../../kicker/data/tiles:11
msgid "Solid Gray"
msgstr "灰色"

#: ../../kicker/data/tiles:12
msgid "Solid Green"
msgstr "绿色"

#: ../../kicker/data/tiles:13
msgid "Solid Orange"
msgstr "桔黄"

#: ../../kicker/data/tiles:14
msgid "Solid Pastel"
msgstr "蜡笔画"

#: ../../kicker/data/tiles:15
msgid "Solid Purple"
msgstr "紫色"

#: ../../kicker/data/tiles:16
msgid "Solid Red"
msgstr "红色"

#: ../../kicker/data/tiles:17
msgid "Solid Tigereye"
msgstr "虎眼石"

#: advancedOptions.ui:27
#, no-c-format
msgid "Panel Dimensions"
msgstr "面板尺寸"

#: advancedOptions.ui:38
#, no-c-format
msgid "&Hide button size:"
msgstr "隐藏按钮的大小(&H)："

#: advancedOptions.ui:44 advancedOptions.ui:61
#, no-c-format
msgid ""
"This setting defines how large the panel hide buttons will be if they are "
"visible."
msgstr "这个选项指定面板上隐藏按钮显示的大小。"

#: advancedOptions.ui:52 positiontab.ui:504
#, no-c-format
msgid " pixels"
msgstr " 像素"

#: advancedOptions.ui:88
#, no-c-format
msgid "Applet Handles"
msgstr "小程序把手"

#: advancedOptions.ui:99
#, no-c-format
msgid "&Visible"
msgstr "可见(&V)"

#: advancedOptions.ui:105
#, no-c-format
msgid ""
"<qt>\n"
"<p>Select this option to always show the Applet Handles.</p>\n"
"<p>Applet Handles let you move, remove and configure applets in the panel.</"
"p>\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>选择此选项将总是显示小程序把手。</p>\n"
"<p>小程序把手可让您在面板中移动、删除并配置小程序。</p>\n"
"</qt>"

#: advancedOptions.ui:116
#, no-c-format
msgid "&Fade out"
msgstr "淡出(&F)"

#: advancedOptions.ui:119
#, no-c-format
msgid ""
"<qt>\n"
"<p>Select this option to make Applet Handles visible only on mouse hover.</"
"p>\n"
"<p>Applet Handles let you move, remove and configure applets in the panel.</"
"p>\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p>选择此选项可让小程序把手仅当鼠标悬停时才可见。</p>\n"
"<p>小程序把手可让您在面板中移动、删除并配置小程序。</p>\n"
"</qt>"

#: advancedOptions.ui:130
#, no-c-format
msgid "&Hide"
msgstr "隐藏(&H)"

#: advancedOptions.ui:133
#, no-c-format
msgid ""
"<qt>\n"
"<p><p>Select this option to always hide the Applet Handles. Beware that this "
"option can disable removing, moving or configuring some applets.</p>\n"
"</qt>"
msgstr ""
"<qt>\n"
"<p><p>选择此选项将总是隐藏小程序把手。请留意，这个选项将禁止删除、移动或配置"
"某些小程序。</p>\n"
"</qt>"

#: advancedOptions.ui:162
#, no-c-format
msgid "Transparency"
msgstr "透明度"

#: advancedOptions.ui:184 advancedOptions.ui:285
#, no-c-format
msgid ""
"Click on this button to set the color to use when tinting transparent panels."
msgstr "单击此按钮可设定要对透明面板进行染色。"

#: advancedOptions.ui:209
#, no-c-format
msgid "Min"
msgstr "最小"

#: advancedOptions.ui:215 advancedOptions.ui:243 advancedOptions.ui:257
#: advancedOptions.ui:271
#, no-c-format
msgid ""
"Use this slider to set how much transparent panels should be tinted using "
"the tint color."
msgstr "使用此滑块可设定要使用多浓的颜色对透明面板染色。"

#: advancedOptions.ui:251
#, no-c-format
msgid "Max"
msgstr "最大"

#: advancedOptions.ui:265
#, no-c-format
msgid "Ti&nt amount:"
msgstr "染色总量(&N)："

#: advancedOptions.ui:279
#, no-c-format
msgid "Tint c&olor:"
msgstr "染色(&O)："

#: advancedOptions.ui:293
#, no-c-format
msgid "Also apply to panel with menu bar"
msgstr "也应用到带菜单栏的面板"

#: advancedOptions.ui:296
#, no-c-format
msgid ""
"Normally if you have the desktop's or current application's menu bar "
"displayed in a panel at the top of the screen (MacOS-style), transparency is "
"disabled for this panel to avoid the desktop background clashing with the "
"menu bar. Set this option to make it transparent anyways."
msgstr ""
"通常情况下，如果您在屏幕最上方将桌面或当前应用程序的菜单栏显示为面板的话"
"(MacOS 样式)，该面板的透明样式是被禁用的，这样可以避免背景干扰菜单栏。设定此"
"选项将使得该面板也透明。"

#: advancedOptions.ui:304
#, no-c-format
msgid "Blur the background when transparency is enabled"
msgstr ""

#: advancedOptions.ui:307
#, no-c-format
msgid ""
"When checked, the displayed semi-transparent background image will be "
"blurred to reduce eyestrain."
msgstr ""

#: advancedOptions.ui:317
#, no-c-format
msgid "Texture"
msgstr ""

#: advancedOptions.ui:328
#, no-c-format
msgid "Show resize handle on panels"
msgstr ""

#: advancedOptions.ui:331
#, no-c-format
msgid ""
"Enabling this option will show a resize handle on the resizable end of each "
"panel."
msgstr ""

#: advancedOptions.ui:339
#, no-c-format
msgid "Use deep buttons"
msgstr ""

#: advancedOptions.ui:342
#, no-c-format
msgid "Enabling this option will yield more highly textured panels."
msgstr ""

#: applettab.ui:24
#, no-c-format
msgid "Security Level"
msgstr "安全级别"

#: applettab.ui:35
#, no-c-format
msgid "Load only trusted applets internal"
msgstr "仅内部载入受信任的小程序"

#: applettab.ui:43
#, no-c-format
msgid "Load startup config applets internal"
msgstr "内部载入启动配置小程序"

#: applettab.ui:51
#, no-c-format
msgid "Load all applets internal"
msgstr "内部载入所有的小程序"

#: applettab.ui:67
#, no-c-format
msgid "List of Trusted Applets"
msgstr "受信任的小程序的列表"

#: applettab.ui:84
#, no-c-format
msgid "Available Applets"
msgstr "可用的小程序"

#: applettab.ui:133
#, no-c-format
msgid ">>"
msgstr ">>"

#: applettab.ui:172
#, no-c-format
msgid "<<"
msgstr "<<"

#: applettab.ui:197
#, no-c-format
msgid "Trusted Applets"
msgstr "信任的小程序"

#: hidingtab.ui:44 positiontab.ui:48
#, no-c-format
msgid "S&ettings for:"
msgstr "设置(&E)："

#: hidingtab.ui:79
#, no-c-format
msgid "Hide Mode"
msgstr "隐藏模式"

#: hidingtab.ui:107
#, no-c-format
msgid "On&ly hide when a panel-hiding button is clicked"
msgstr "点击隐藏按钮才隐藏(&L)"

#: hidingtab.ui:113
#, no-c-format
msgid ""
"If this option is selected, the only way to hide the panel will be to click "
"on the hide buttons that appear on either end of it."
msgstr "如果此项被选中，点击面板两端的隐藏按钮将是隐藏面板的唯一方式。"

#: hidingtab.ui:138
#, no-c-format
msgid " sec"
msgstr " 秒"

#: hidingtab.ui:141
#, no-c-format
msgid "Immediately"
msgstr "立刻隐藏"

#: hidingtab.ui:144 hidingtab.ui:169
#, no-c-format
msgid ""
"Here you can change the delay after which the panel will disappear if not "
"used."
msgstr "您可以修改面板多长时间不使用后就会隐藏。"

#: hidingtab.ui:163
#, no-c-format
msgid "after the &cursor leaves the panel"
msgstr "光标离开面板后(&C)"

#: hidingtab.ui:199
#, no-c-format
msgid "Allow other &windows to cover the panel"
msgstr "允许其它窗口覆盖面板(&W)"

#: hidingtab.ui:202
#, no-c-format
msgid ""
"If this option is selected, the panel will allow itself to be covered by "
"other windows."
msgstr "如果选中这个选项，面板将允许自己被其它窗口覆盖。"

#: hidingtab.ui:213
#, no-c-format
msgid "Hide a&utomatically"
msgstr "自动隐藏(&U)"

#: hidingtab.ui:216
#, no-c-format
msgid ""
"If this option is selected, the panel will automatically hide after a period "
"of time and reappear when you move the mouse to the screen edge where the "
"panel is hidden. This is particularly useful for small screen resolutions, "
"such as on laptops."
msgstr ""
"如果启用这个选项，面板将在一段时间后自动隐藏，并在您将鼠标移动到靠近面板的屏"
"幕边缘时重新出现。这在低分辨率下特别有用，例如某些膝上型电脑。"

#: hidingtab.ui:235
#, no-c-format
msgid "&Raise when the pointer touches the screen's:"
msgstr "升到最前面，如果鼠标移到屏幕的(&R)："

#: hidingtab.ui:238
#, no-c-format
msgid ""
"When this option is selected, moving the pointer to the specified edge of "
"the screen will cause the panel to appear on top of any windows that may be "
"covering it."
msgstr ""
"此个选项被选中时，将鼠标移到选定的屏幕边角，面板就将显示在其它窗口上面，不再"
"被盖住。"

#: hidingtab.ui:244
#, no-c-format
msgid "Top Left Corner"
msgstr "左上角"

#: hidingtab.ui:249
#, no-c-format
msgid "Top Edge"
msgstr "上边缘"

#: hidingtab.ui:254
#, no-c-format
msgid "Top Right Corner"
msgstr "右上角"

#: hidingtab.ui:259
#, no-c-format
msgid "Right Edge"
msgstr "右边缘"

#: hidingtab.ui:264
#, no-c-format
msgid "Bottom Right Corner"
msgstr "右下角"

#: hidingtab.ui:269
#, no-c-format
msgid "Bottom Edge"
msgstr "下边缘"

#: hidingtab.ui:274
#, no-c-format
msgid "Bottom Left Corner"
msgstr "左下角"

#: hidingtab.ui:279
#, no-c-format
msgid "Left Edge"
msgstr "左边缘"

#: hidingtab.ui:289
#, no-c-format
msgid ""
"Here you can set the location on the screen's edge that will bring the panel "
"to the front."
msgstr "这里您可以选择把鼠标移到屏幕的边角部位就使面板升到最上面。"

#: hidingtab.ui:319
#, no-c-format
msgid "&Hide panel when configured screen is not available"
msgstr ""

#: hidingtab.ui:322
#, no-c-format
msgid ""
"When this option is selected, this panel will be hidden if its Xinerama "
"screen is not available.  This panel will be automatically restored when the "
"configured Xinerama screen is reenabled."
msgstr ""

#: hidingtab.ui:333
#, no-c-format
msgid "Show panel when switching &desktops"
msgstr "在切换桌面时显示面板(&D)"

#: hidingtab.ui:336
#, no-c-format
msgid ""
"If this option is enabled, the panel will automatically show itself for a "
"brief period of time when the desktop is switched so you can see which "
"desktop you are on."
msgstr ""
"如果启用该选项，当桌面切换时面板将自动显示一小段时间，这样您可以知道您现在在"
"哪个桌面上。"

#: hidingtab.ui:371
#, no-c-format
msgid "Panel-Hiding Buttons"
msgstr "隐藏面板的按钮"

#: hidingtab.ui:374
#, no-c-format
msgid ""
"This option controls the panel-hiding buttons, which are buttons with a "
"small triangle found at the ends of the panel. You can place a button at "
"either end of the panel, or both. Clicking on one of these buttons will hide "
"the panel."
msgstr ""
"此选项控制面板两端画着小三角的隐藏按钮。您可以把隐藏按钮安排在面板的任意一"
"端，或两端都有。点击任何一个隐藏按钮就能使面板隐藏起来。"

#: hidingtab.ui:391
#, no-c-format
msgid ""
"When this option is selected, a panel-hiding button appears on the left end "
"of the panel."
msgstr "选中此项时，面板条左端将出现一个隐藏按钮。"

#: hidingtab.ui:399
#, no-c-format
msgid "Show right panel-hiding &button"
msgstr "显示右边的隐藏按钮(&B)"

#: hidingtab.ui:405
#, no-c-format
msgid ""
"When this option is selected, a panel-hiding button appears on the right end "
"of the panel."
msgstr "选中此项时，面板条右端将出现一个隐藏按钮。"

#: hidingtab.ui:440
#, no-c-format
msgid "Panel Animation"
msgstr "面板动画"

#: hidingtab.ui:468
#, no-c-format
msgid "A&nimate panel hiding"
msgstr "面板动画隐藏(&N)"

#: hidingtab.ui:471
#, no-c-format
msgid ""
"When this option is selected the panel will \"slide\" off the screen when "
"hiding. The speed of the animation is controlled by the slider directly "
"below."
msgstr ""
"选中此项后，面板隐藏时将慢慢“滑出”屏幕。动画的速度由下面紧挨着的滑动杆控制。"

#: hidingtab.ui:536
#, no-c-format
msgid "Determines how quickly the panel hides if hiding animation is enabled."
msgstr "决定面板动画隐藏的速度。"

#: hidingtab.ui:572
#, no-c-format
msgid "Fast"
msgstr "快"

#: hidingtab.ui:613
#, no-c-format
msgid "Medium"
msgstr "中"

#: hidingtab.ui:637
#, no-c-format
msgid "Slow"
msgstr "慢"

#: lookandfeeltab.ui:16
#, no-c-format
msgid ""
"If this option is selected, informational tooltips will appear when the "
"mouse cursor moves over the icons, buttons and applets in the panel."
msgstr ""
"如果选中此项，当鼠标移动到面板上的图标、按钮和小程序上时，将会出现工具提示"
"条。"

#: lookandfeeltab.ui:30
#, no-c-format
msgid "General"
msgstr "常规"

#: lookandfeeltab.ui:41
#, no-c-format
msgid "Enable icon &mouseover effects"
msgstr "启用图标鼠标悬停特效(&M)"

#: lookandfeeltab.ui:44
#, no-c-format
msgid ""
"When this option is selected a mouseover effect appears when the mouse "
"cursor is moved over panel buttons"
msgstr "如果启用这个选项，当鼠标移动到按钮图标上时，图标会被放大。"

#: lookandfeeltab.ui:52
#, fuzzy, no-c-format
msgid "Enable icon activation effects"
msgstr "启用图标鼠标悬停特效(&M)"

#: lookandfeeltab.ui:55
#, fuzzy, no-c-format
msgid ""
"When this option is selected an activation effect appears when panel buttons "
"are left clicked."
msgstr "如果启用这个选项，当鼠标移动到按钮图标上时，图标会被放大。"

#: lookandfeeltab.ui:63
#, no-c-format
msgid "Show too&ltips"
msgstr "显示工具提示(&L)"

#: lookandfeeltab.ui:66
#, no-c-format
msgid ""
"When this option is selected informational tooltips will appear when the "
"mouse cursor moves over the icons, buttons and applets in the panel."
msgstr ""
"如果选中此项，当鼠标移动到面板上的图标、按钮和小程序上时，将会出现工具提示"
"条。"

#: lookandfeeltab.ui:76
#, no-c-format
msgid "Button Backgrounds"
msgstr "按钮背景"

#: lookandfeeltab.ui:87
#, no-c-format
msgid "&TDE menu:"
msgstr "&K 菜单："

#: lookandfeeltab.ui:93 lookandfeeltab.ui:165
#, no-c-format
msgid "Choose a tile image for the TDE menu."
msgstr "为 K 菜单选择一个平铺图像。"

#: lookandfeeltab.ui:101
#, no-c-format
msgid "&QuickBrowser menus:"
msgstr "快捷浏览菜单(&Q)："

#: lookandfeeltab.ui:107 lookandfeeltab.ui:136
#, no-c-format
msgid "Choose a tile image for Quick Browser buttons."
msgstr "为快捷浏览按钮选择一个平铺图像。"

#: lookandfeeltab.ui:118 lookandfeeltab.ui:147 lookandfeeltab.ui:198
#: lookandfeeltab.ui:252 lookandfeeltab.ui:331
#, no-c-format
msgid "Custom Color"
msgstr "自定义颜色"

#: lookandfeeltab.ui:176
#, no-c-format
msgid ""
"When the Custom Color option is selected, use this button to pick a color "
"for quick browser tile backgrounds"
msgstr "若选中了自定义颜色选项，请使用此按钮拾取快速浏览器的平铺背景"

#: lookandfeeltab.ui:187
#, no-c-format
msgid ""
"When the Custom Color option is selected, use this button to pick a color "
"for the TDE menu tile background"
msgstr "若选中了自定义颜色选项，请使用此按钮拾取 K 菜单的平铺背景"

#: lookandfeeltab.ui:216 lookandfeeltab.ui:241
#, no-c-format
msgid "Choose a tile image for window list buttons."
msgstr "为窗口列表按钮选择一个平铺图像。"

#: lookandfeeltab.ui:227
#, no-c-format
msgid ""
"When the Custom Color option is selected, use this button to pick a color "
"for window list tile backgrounds"
msgstr "若选中了自定义颜色选项，请使用此按钮拾取窗口列表的平铺背景"

#: lookandfeeltab.ui:235
#, no-c-format
msgid "&Window list:"
msgstr "窗口列表(&W)："

#: lookandfeeltab.ui:270 lookandfeeltab.ui:295
#, no-c-format
msgid "Choose a tile image for desktop access buttons."
msgstr "为桌面访问按钮选择一个平铺图像。"

#: lookandfeeltab.ui:281
#, no-c-format
msgid ""
"When the Custom Color option is selected, use this button to pick a color "
"for the desktop tile background"
msgstr "若选中了自定义颜色选项，请使用此按钮拾取桌面的平铺背景"

#: lookandfeeltab.ui:289
#, no-c-format
msgid "De&sktop access:"
msgstr "桌面访问(&S)："

#: lookandfeeltab.ui:306
#, no-c-format
msgid ""
"When the Custom Color option is selected, use this button to pick a color "
"for application tile backgrounds"
msgstr "若选中了自定义颜色选项，请使用此按钮拾取应用程序的平铺背景"

#: lookandfeeltab.ui:314
#, no-c-format
msgid "Applicatio&ns:"
msgstr "应用程序(&N)："

#: lookandfeeltab.ui:320 lookandfeeltab.ui:349
#, no-c-format
msgid "Choose a tile image for buttons that launch applications."
msgstr "为启动应用程序按钮选择一个平铺图像。"

#: lookandfeeltab.ui:376
#, no-c-format
msgid "Panel Background"
msgstr "面板背景"

#: lookandfeeltab.ui:407
#, no-c-format
msgid "Colorize to &match the desktop color scheme"
msgstr "按照桌面颜色方案着色(&M)"

#: lookandfeeltab.ui:413
#, no-c-format
msgid ""
"If this option is selected, the panel background image will be colored to "
"match the default colors. To change the default colors, go to the 'Colors' "
"control module."
msgstr ""
"如果选中了此选项，面板背景图像将按照默认颜色着色。要更改默认颜色，请前往“颜"
"色”控制模块。"

#: lookandfeeltab.ui:460
#, no-c-format
msgid "This is a preview for the selected background image."
msgstr "这是选中的背景图像的预览。"

#: lookandfeeltab.ui:479
#, no-c-format
msgid ""
"Here you can choose a theme to be displayed by the panel. Press the 'Browse' "
"button to choose a theme using the file dialog.\n"
"This option is only active if 'Enable background image' is selected."
msgstr ""
"您可在这里选择面板所显示的主题。按下“浏览”按钮可使用文件对话框选择主题。\n"
"此选项仅当“启用背景图像”选中时才有效。"

#: lookandfeeltab.ui:488
#, no-c-format
msgid "Enable &background image"
msgstr "启用背景图像(&B)"

#: lookandfeeltab.ui:496
#, no-c-format
msgid "Enable &transparency"
msgstr "允许透明(&T)"

#: lookandfeeltab.ui:514
#, no-c-format
msgid "Advanc&ed Options"
msgstr "高级选项(&E)"

#: lookandfeeltab.ui:517
#, no-c-format
msgid ""
"Click here to open the Advanced Options dialog. You can configure the applet "
"handles look and feel, the tint transparency color and more."
msgstr ""
"点击此处打开高级选项对话框。您可以配置小程序把手的观感、透明染色等选项。"

#: menutab.ui:35
#, fuzzy, no-c-format
msgid "TDE menu style:"
msgstr "&K 菜单："

#: menutab.ui:44
#, no-c-format
msgid "Kickoff"
msgstr ""

#: menutab.ui:49
#, no-c-format
msgid "Trinity Classic"
msgstr ""

#: menutab.ui:80
#, no-c-format
msgid "TDE Menu"
msgstr "K 菜单"

#: menutab.ui:102
#, no-c-format
msgid "Menu item format:"
msgstr "菜单项格式："

#: menutab.ui:108
#, no-c-format
msgid "Here you can choose how menu entries are shown."
msgstr "您可在此选择菜单项显示的方式。"

#: menutab.ui:119
#, no-c-format
msgid "&Name only"
msgstr "只有名称(&N)"

#: menutab.ui:122
#, no-c-format
msgid ""
"When this option is selected, items in the TDE Menu will appear with the "
"application's name next to the icon."
msgstr "如果选中此项，K 菜单上各项图标旁边将只显示其名称。"

#: menutab.ui:130
#, no-c-format
msgid "Name - &Description"
msgstr "名称 - 描述(&D)"

#: menutab.ui:136
#, no-c-format
msgid ""
"When this option is selected, items in the TDE Menu will appear with the "
"application's name and a brief description next to the icon."
msgstr "如果选中此项，K 菜单上各项图标旁边将显示其名称及其简短描述。"

#: menutab.ui:144
#, no-c-format
msgid "D&escription only"
msgstr "只有描述(&E)"

#: menutab.ui:147
#, no-c-format
msgid ""
"When this option is selected, items in the TDE Menu will appear with the "
"application's brief description next to the icon."
msgstr "如果选中此项，K 菜单上各项图标旁边将只显示应用程序的简短描述。"

#: menutab.ui:158
#, no-c-format
msgid "Des&cription (Name)"
msgstr "描述(名称)(&C)"

#: menutab.ui:161
#, no-c-format
msgid ""
"When this option is selected, items in the TDE Menu will appear with a brief "
"description and the application's name in brackets next to the icon."
msgstr "如果选中此项，K 菜单上各项图标旁边将显示其描述，并在括号里附加其名称。"

#: menutab.ui:171
#, no-c-format
msgid "Edit &TDE Menu"
msgstr "编辑 &K 菜单"

#: menutab.ui:174
#, fuzzy, no-c-format
msgid ""
"Start the editor for the TDE Menu. Here you can add, edit, remove and hide "
"applications."
msgstr "启动 K 菜单的编辑器。您可在此添加、编辑、删除和隐藏应用程序。"

#: menutab.ui:182
#, no-c-format
msgid "Change menu icon"
msgstr ""

#: menutab.ui:185
#, fuzzy, no-c-format
msgid "Allows you to choose a different icon for the TDE menu."
msgstr "为 K 菜单选择一个平铺图像。"

#: menutab.ui:213
#, no-c-format
msgid "Optional Menus"
msgstr "可选菜单"

#: menutab.ui:243
#, no-c-format
msgid ""
"This is a list of the dynamic menus that can be displayed in the TDE menu in "
"addition to the normal applications. Use the checkboxes to add or remove "
"menus."
msgstr ""
"这里列出的是可以添加到 TDE 菜单上的动态菜单。用复选框添加或删除这些菜单。"

#: menutab.ui:256
#, no-c-format
msgid "Open menu on mouse hover"
msgstr ""

#: menutab.ui:264
#, fuzzy, no-c-format
msgid "Show T&ooltip"
msgstr "显示工具提示(&L)"

#: menutab.ui:270
#, no-c-format
msgid ""
"<qt>When this option is selected, a tooltip appears when hovering the mouse "
"pointer over Application Launcher Menu items. Enabling this option also "
"requires that tooltips are enabled in the Panels->Appearance configuration "
"dialog."
msgstr ""

#: menutab.ui:278
#, no-c-format
msgid "Show side ima&ge"
msgstr "显示旁边的图像(&G)"

#: menutab.ui:284
#, fuzzy, no-c-format
msgid ""
"<qt>When this option is selected an image will appear down the left-hand "
"side of the TDE Menu. The image will be tinted according to your color "
"settings.\n"
"\t\t\t\t\t\t\t\t\n"
"\t\t\t\t\t\t\t\t<p><b>Tip</b>: You can customize the image that appears in "
"the TDE Menu by putting an image file called kside.png and a tileable image "
"file called kside_tile.png in $TDEHOME/share/apps/kicker/pics.</qt>"
msgstr ""
"<qt>如果选中此项，K 菜单左边将会显示一条图片，该图片将按您的色彩设置着色。\n"
"\n"
"<p><b>提示</b>：您可以自定义出现在 K 菜单上的图像，只需在 $TDEHOME/share/"
"apps/kicker/pics 目录下放一个名为 kside.png 的图片文件和一个名为 kside_title."
"png 的可拼接图案文件。</qt>"

#: menutab.ui:294
#, fuzzy, no-c-format
msgid "Show top ima&ge"
msgstr "显示旁边的图像(&G)"

#: menutab.ui:300
#, fuzzy, no-c-format
msgid ""
"<qt>When this option is selected an image will appear on top of the TDE "
"Menu. The image will be tinted according to your color settings.\n"
"\t\t\t\t\t\t\t\t\n"
"\t\t\t\t\t\t\t\t<p><b>Tip</b>: You can customize the image that appears in "
"the TDE Menu by putting image files called kside_top_left.png and "
"kside_top_right.png, and a tileable image file called kside_top_tile.png in "
"$TDEHOME/share/apps/kicker/pics.</qt>"
msgstr ""
"<qt>如果选中此项，K 菜单左边将会显示一条图片，该图片将按您的色彩设置着色。\n"
"\n"
"<p><b>提示</b>：您可以自定义出现在 K 菜单上的图像，只需在 $TDEHOME/share/"
"apps/kicker/pics 目录下放一个名为 kside.png 的图片文件和一个名为 kside_title."
"png 的可拼接图案文件。</qt>"

#: menutab.ui:310
#, no-c-format
msgid "Display text in menu button"
msgstr ""

#: menutab.ui:316
#, fuzzy, no-c-format
msgid ""
"<qt>When this option is selected the text below will be shown in the TDE "
"Menu button."
msgstr "如果选中此项，K 菜单上各项图标旁边将只显示其名称。"

#: menutab.ui:339
#, no-c-format
msgid "Text:"
msgstr ""

#: menutab.ui:363
#, no-c-format
msgid "Font:"
msgstr ""

#: menutab.ui:422
#, no-c-format
msgid "QuickBrowser Menus"
msgstr "快捷浏览菜单"

#: menutab.ui:441 menutab.ui:526
#, no-c-format
msgid "Ma&ximum number of entries:"
msgstr "最大菜单项数(&X)："

#: menutab.ui:447 menutab.ui:464
#, no-c-format
msgid ""
"When browsing directories that contain a lot of files, the QuickBrowser can "
"sometimes hide your whole desktop. Here you can limit the number of entries "
"shown at a time in the QuickBrowser. This is particularly useful for low "
"screen resolutions."
msgstr ""
"当浏览有很多文件的目录的时候，快捷浏览菜单有时会盖满您整个桌面。您可以限制快"
"捷浏览同时可以显示的项目数。这在低分辨率下特别有用。"

#: menutab.ui:474
#, no-c-format
msgid "Show hidden fi&les"
msgstr "显示隐藏文件(&L)"

#: menutab.ui:480
#, no-c-format
msgid ""
"If this option is enabled, hidden files (i.e. files beginning with a dot) "
"will be shown in the QuickBrowser menus."
msgstr ""
"如果启用这个选项，隐藏文件(即以 . 为文件名开始的文件)将在快捷浏览菜单中显示。"

#: menutab.ui:507
#, no-c-format
msgid "Recent Documents Menu"
msgstr ""

#: menutab.ui:532 menutab.ui:549
#, no-c-format
msgid ""
"This sets the maximum number of recently accessed documents stored for fast "
"retrieval."
msgstr ""

#: menutab.ui:578
#, no-c-format
msgid "QuickStart Menu Items"
msgstr "快速启动菜单项"

#: menutab.ui:597
#, no-c-format
msgid "Maxim&um number of entries:"
msgstr "最多菜单项数(&U)："

#: menutab.ui:603
#, no-c-format
msgid ""
"This option allows you to define the maximum number of applications that "
"should be displayed in the QuickStart menu area."
msgstr "此选项让您能指定快速启动菜单区显示的最多程序个数。"

#: menutab.ui:620
#, no-c-format
msgid ""
"This option allows you to define how many applications should be displayed "
"at most in the QuickStart menu area."
msgstr "此选项让您能指定快速启动菜单区显示的最多程序个数。"

#: menutab.ui:630
#, no-c-format
msgid "Show the &applications most recently used"
msgstr "显示最近使用过的程序(&A)"

#: menutab.ui:636
#, no-c-format
msgid ""
"When this option is selected the QuickStart menu area will be filled with "
"the applications you have used most recently."
msgstr "选中此选项，快速启动菜单区将会包括您最近使用过的程序。"

#: menutab.ui:644
#, no-c-format
msgid "Show the applications most fre&quently used"
msgstr "显示使用次数最多的程序(&Q)"

#: menutab.ui:647
#, no-c-format
msgid ""
"When this option is selected the QuickStart menu area will be filled with "
"the applications you use most frequently."
msgstr "选中此选项，快速启动菜单区将会包括您最经常使用的程序。"

#: menutab.ui:674
#, fuzzy, no-c-format
msgid "TDE Menu Search"
msgstr "K 菜单"

#: menutab.ui:685
#, no-c-format
msgid "Show search field in TDE Menu"
msgstr ""

#: menutab.ui:691
#, fuzzy, no-c-format
msgid ""
"<qt>When this option is selected a text-based search field will appear in "
"the TDE Menu.</qt>"
msgstr "选中此项时，面板条左端将出现一个隐藏按钮。"

#: positiontab.ui:17
#, no-c-format
msgid ""
"This is a list of all the panels currently active on your desktop. Select "
"one to configure."
msgstr "这里列出的是您的系统当前用到的所有面板。请选择一个进行配置。"

#: positiontab.ui:83
#, no-c-format
msgid "Screen"
msgstr "屏幕"

#: positiontab.ui:139
#, no-c-format
msgid ""
"This preview image shows how the panel will appear on your screen with the "
"settings you have chosen. Clicking the buttons around the image will move "
"the position of the panel, while moving the length slider and choosing "
"different sizes will change the dimensions of the panel."
msgstr ""
"这个预览图像显示了在您所选的设置下面板是如何出现在屏幕上的。点击图案周围的按"
"钮将改变面板的位置，移动长度滑杆和选择不同大小将改变面板的尺寸。"

#: positiontab.ui:191
#, no-c-format
msgid "Identify"
msgstr "标识"

#: positiontab.ui:194
#, no-c-format
msgid "This button displays each monitor's identifying number"
msgstr "此按钮显示每个显示器的标识号码"

#: positiontab.ui:212
#, no-c-format
msgid "&Xinerama screen:"
msgstr "&Xinerama 屏幕："

#: positiontab.ui:223
#, no-c-format
msgid ""
"This menu selects which screen the Panel will be displayed on in a multiple-"
"monitor system"
msgstr "这个菜单选择多显示器系统中，面板将在哪个屏幕上显示"

#: positiontab.ui:260
#, no-c-format
msgid "Len&gth"
msgstr "长度(&G)"

#: positiontab.ui:263
#, no-c-format
msgid ""
"This group of settings determines how the panel is aligned, including\n"
"how it is positioned on the screen and how much of the screen it should use."
msgstr ""
"这组选项决定了面板在屏幕上将如何对齐、放置在何处、以及使用多大部分的屏幕。"

#: positiontab.ui:312
#, no-c-format
msgid ""
"This slider defines how much of the screen's edge will be occupied by the "
"panel."
msgstr "这个滑动杆控制屏幕边上多长的部分被面板占用。"

#: positiontab.ui:329
#, no-c-format
msgid "%"
msgstr "%"

#: positiontab.ui:332
#, no-c-format
msgid ""
"This spinbox defines how much of the screen's edge will be occupied by the "
"panel."
msgstr "这个滚轮控制屏幕边上多长的部分被面板占用。"

#: positiontab.ui:342
#, no-c-format
msgid "&Expand as required to fit contents"
msgstr "自动扩大到需要的尺寸(&E)"

#: positiontab.ui:345
#, no-c-format
msgid ""
"When this option is selected, the panel will grow as necessary to "
"accommodate the buttons and applets on it."
msgstr ""
"如果选中此选项，面板尺寸将按照需要，扩大到可以容纳它上面的全部按钮和小程序。"

#: positiontab.ui:380
#, no-c-format
msgid "Si&ze"
msgstr "大小(&Z)"

#: positiontab.ui:383
#, no-c-format
msgid "This sets the size of the panel."
msgstr "这将设置面板的大小。"

#: positiontab.ui:392
#, no-c-format
msgid "Tiny"
msgstr "极小"

#: positiontab.ui:397
#, no-c-format
msgid "Small"
msgstr "小"

#: positiontab.ui:402
#, no-c-format
msgid "Normal"
msgstr "正常"

#: positiontab.ui:407
#, no-c-format
msgid "Large"
msgstr "大"

#: positiontab.ui:484
#, no-c-format
msgid "This slider defines the panel size when the Custom option is selected."
msgstr "当使用自定义选项时，这个滑动杆指定面板的高度。"

#: positiontab.ui:507
#, no-c-format
msgid "This spinbox defines the panel size when the Custom option is selected."
msgstr "当使用自定义选项时，这个滚轮指定面板的高度。"

#: positiontab.ui:519
#, no-c-format
msgid "Position"
msgstr "位置"

#: positiontab.ui:525
#, no-c-format
msgid ""
"Here you can set the position of the panel highlighted on the left side. You "
"can put any panel on top or bottom of the screen and on the left or right "
"side of the screen. There you can put it into the center or into either "
"corner of the screen."
msgstr ""
"您可在此设置左侧突出显示的面板所在的位置。您可以将任何面板放在屏幕的上边、下"
"边、左边、右边。而且，您可以将其放在一边的中间，也可以放在屏幕的一角。"

#: positiontab.ui:609
#, no-c-format
msgid "Alt+1"
msgstr "Alt+1"

#: positiontab.ui:643
#, no-c-format
msgid "Alt+2"
msgstr "Alt+2"

#: positiontab.ui:677
#, no-c-format
msgid "Alt+3"
msgstr "Alt+3"

#: positiontab.ui:721
#, no-c-format
msgid "Alt+="
msgstr "Alt+="

#: positiontab.ui:755
#, no-c-format
msgid "Alt+-"
msgstr "Alt+-"

#: positiontab.ui:789
#, no-c-format
msgid "Alt+0"
msgstr "Alt+0"

#: positiontab.ui:833
#, no-c-format
msgid "Alt+9"
msgstr "Alt+9"

#: positiontab.ui:867
#, no-c-format
msgid "Alt+8"
msgstr "Alt+8"

#: positiontab.ui:901
#, no-c-format
msgid "Alt+7"
msgstr "Alt+7"

#: positiontab.ui:945
#, no-c-format
msgid "Alt+4"
msgstr "Alt+4"

#: positiontab.ui:979
#, no-c-format
msgid "Alt+5"
msgstr "Alt+5"

#: positiontab.ui:1013
#, no-c-format
msgid "Alt+6"
msgstr "Alt+6"

#~ msgid "advancedKickerOptions"
#~ msgstr "advancedKickerOptions"

#~ msgid "Arran&gement"
#~ msgstr "布局(&G)"

#~ msgid "H&iding"
#~ msgstr "隐藏(&I)"

#~ msgid "&Menus"
#~ msgstr "菜单(&M)"

#~ msgid "A&ppearance"
#~ msgstr "外观(&P)"