path: root/kimgio/eps.cpp

// This library is distributed under the conditions of the GNU LGPL.
#include <unistd.h>
#include <stdio.h>
#include <tqimage.h>
#include <tqfile.h>
#include <tqpainter.h>
#include <tqprinter.h>
#include <kapplication.h>
#include <ktempfile.h>
#include <kdebug.h>
#include "eps.h"

#define BUFLEN 200

#define BBOX "%%BoundingBox:"
#define BBOX_LEN strlen(BBOX)

static bool seekToCodeStart( TQIODevice * io, TQ_UINT32 & ps_offset, TQ_UINT32 & ps_size )
{
    char buf[4]; // We at most need to read 4 bytes at a time
    ps_offset=0L;
    ps_size=0L;

    if ( io->readBlock(buf, 2)!=2 ) // Read first two bytes
    {
        kdError(399) << "kimgio EPS: EPS file has less than 2 bytes." << endl;
        return false;
    }

    if ( buf[0]=='%' && buf[1]=='!' ) // Check %! magic
    {
        kdDebug(399) << "kimgio EPS: normal EPS file" << endl;
    }
    else if ( buf[0]==char(0xc5) && buf[1]==char(0xd0) ) // Check start of MS-DOS EPS magic
    {   // May be a MS-DOS EPS file
        if ( io->readBlock(buf+2, 2)!=2 ) // Read further bytes of MS-DOS EPS magic
        {
            kdError(399) << "kimgio EPS: potential MS-DOS EPS file has less than 4 bytes." << endl;
            return false;
        }
        if ( buf[2]==char(0xd3) && buf[3]==char(0xc6) ) // Check last bytes of MS-DOS EPS magic
        {
            if (io->readBlock(buf, 4)!=4) // Get offset of PostScript code in the MS-DOS EPS file.
            {
                kdError(399) << "kimgio EPS: cannot read offset of MS-DOS EPS file" << endl;
                return false;
            }
            ps_offset // Offset is in little endian
                = ((unsigned char) buf[0])
                + ((unsigned char) buf[1] << 8)
                + ((unsigned char) buf[2] << 16)
                + ((unsigned char) buf[3] << 24);
            if (io->readBlock(buf, 4)!=4) // Get size of PostScript code in the MS-DOS EPS file.
            {
                kdError(399) << "kimgio EPS: cannot read size of MS-DOS EPS file" << endl;
                return false;
            }
            ps_size // Size is in little endian
                = ((unsigned char) buf[0])
                + ((unsigned char) buf[1] << 8)
                + ((unsigned char) buf[2] << 16)
                + ((unsigned char) buf[3] << 24);
            kdDebug(399) << "kimgio EPS: Offset: " << ps_offset <<" Size: " << ps_size << endl;
            if ( !io->at(ps_offset) ) // Get offset of PostScript code in the MS-DOS EPS file.
            {
                kdError(399) << "kimgio EPS: cannot seek in MS-DOS EPS file" << endl;
                return false;
            }
            if ( io->readBlock(buf, 2)!=2 ) // Read first two bytes of what should be the Postscript code
            {
                kdError(399) << "kimgio EPS: PostScript code has less than 2 bytes." << endl;
                return false;
            }
            if ( buf[0]=='%' && buf[1]=='!' ) // Check %! magic
            {
                kdDebug(399) << "kimgio EPS: MS-DOS EPS file" << endl;
            }
            else
            {
                kdError(399) << "kimgio EPS: supposed Postscript code of a MS-DOS EPS file doe not start with %!." << endl;
                return false;
            }
        }
        else
        {
            kdError(399) << "kimgio EPS: wrong magic for potential MS-DOS EPS file!" << endl;
            return false;
        }
    }
    else
    {
        kdError(399) << "kimgio EPS: not an EPS file!" << endl;
        return false;
    }
    return true;
}

static bool bbox ( TQIODevice *io, int *x1, int *y1, int *x2, int *y2)
{
        char buf[BUFLEN+1];

        bool ret = false;

        while (io->readLine(buf, BUFLEN) > 0)
        {
                if (strncmp (buf, BBOX, BBOX_LEN) == 0)
                {
                        // Some EPS files have non-integer values for the bbox
                        // We don't support that currently, but at least we parse it
                        float _x1, _y1, _x2, _y2;
                        if ( sscanf (buf, "%*s %f %f %f %f",
                                &_x1, &_y1, &_x2, &_y2) == 4) {
                                kdDebug(399) << "kimgio EPS BBOX: " << _x1 << " " << _y1 << " " << _x2 << " " << _y2 << endl;
                                *x1=(int)_x1; *y1=(int)_y1; *x2=(int)_x2; *y2=(int)_y2;
                                ret = true;
                                break;
                        }
                }
        }

        return ret;
}

KDE_EXPORT void kimgio_eps_read (TQImageIO *image)
{
        kdDebug(399) << "kimgio EPS: starting..." << endl;

        FILE * ghostfd;
        int x1, y1, x2, y2;
        //TQTime dt;
        //dt.start();

        TQString cmdBuf;
        TQString tmp;

        TQIODevice* io = image->ioDevice();
        TQ_UINT32 ps_offset, ps_size;

        // find start of PostScript code
        if ( !seekToCodeStart(io, ps_offset, ps_size) )
            return;

        // find bounding box
        if ( !bbox (io, &x1, &y1, &x2, &y2)) {
            kdError(399) << "kimgio EPS: no bounding box found!" << endl;
            return;
        }

        KTempFile tmpFile;
        tmpFile.setAutoDelete(true);

        if( tmpFile.status() != 0 ) {
            kdError(399) << "kimgio EPS: no temp file!" << endl;
            return;
        }
        tmpFile.close(); // Close the file, we just want the filename

        // x1, y1 -> translation
        // x2, y2 -> new size

        x2 -= x1;
        y2 -= y1;
        //kdDebug(399) << "origin point: " << x1 << "," << y1 << "  size:" << x2 << "," << y2 << endl;
        double xScale = 1.0;
        double yScale = 1.0;
	bool needsScaling = false;
        int wantedWidth = x2;
        int wantedHeight = y2;

        if (image->parameters())
        {
            // Size forced by the caller
            TQStringList params = TQStringList::split(':', image->parameters());
            if (params.count() >= 2 && x2 != 0.0 && y2 != 0.0)
            {
                wantedWidth = params[0].toInt();
                xScale = (double)wantedWidth / (double)x2;
                wantedHeight = params[1].toInt();
                yScale = (double)wantedHeight / (double)y2;
                //kdDebug(399) << "wanted size:" << wantedWidth << "x" << wantedHeight << endl;
                //kdDebug(399) << "scaling:" << xScale << "," << yScale << endl;
		needsScaling = true;
            }
        }

        // create GS command line

        cmdBuf = "gs -sOutputFile=";
        cmdBuf += tmpFile.name();
        cmdBuf += " -q -g";
        tmp.setNum( wantedWidth );
        cmdBuf += tmp;
        tmp.setNum( wantedHeight );
        cmdBuf += "x";
        cmdBuf += tmp;
        cmdBuf += " -dSAFER -dPARANOIDSAFER -dNOPAUSE -sDEVICE=ppm -c "
                "0 0 moveto "
                "1000 0 lineto "
                "1000 1000 lineto "
                "0 1000 lineto "
                "1 1 254 255 div setrgbcolor fill "
                "0 0 0 setrgbcolor - -c showpage quit";

        // run ghostview

        ghostfd = popen (TQFile::encodeName(cmdBuf), "w");

        if ( ghostfd == 0 ) {
            kdError(399) << "kimgio EPS: no GhostScript?" << endl;
            return;
        }

        fprintf (ghostfd, "\n%d %d translate\n", -tqRound(x1*xScale), -tqRound(y1*yScale));
        if ( needsScaling )
            fprintf (ghostfd, "%g %g scale\n", xScale, yScale);

        // write image to gs

        io->reset(); // Go back to start of file to give all the file to GhostScript
        if (ps_offset>0L) // We have an offset
              io->at(ps_offset);
        TQByteArray buffer ( io->readAll() );

        // If we have no MS-DOS EPS file or if the size seems wrong, then choose the buffer size
        if (ps_size<=0L || ps_size>buffer.size())
            ps_size=buffer.size();

        fwrite(buffer.data(), sizeof(char), ps_size, ghostfd);
        buffer.resize(0);

        pclose ( ghostfd );

        // load image
        TQImage myimage;
        if( myimage.load (tmpFile.name()) ) {
                image->setImage (myimage);
                image->setqStatus (0);
                kdDebug(399) << "kimgio EPS: success!" << endl;
        }
        else
            kdError(399) << "kimgio EPS: no image!" << endl;

        //kdDebug(399) << "Loading EPS took " << (float)(dt.elapsed()) / 1000 << " seconds" << endl;
        return;
}

// Sven Wiegand <SWiegand@tfh-berlin.de> -- eps output filter (from KSnapshot)
KDE_EXPORT void kimgio_eps_write( TQImageIO *imageio )
{
  TQPrinter psOut(TQPrinter::PrinterResolution);
  TQPainter p;

  // making some definitions (papersize, output to file, filename):
  psOut.setCreator( "KDE " KDE_VERSION_STRING  );
  psOut.setOutputToFile( true );

  // Extension must be .eps so that Qt generates EPS file
  KTempFile tmpFile(TQString::null, ".eps");
  tmpFile.setAutoDelete(true);
  if ( tmpFile.status() != 0)
     return;
  tmpFile.close(); // Close the file, we just want the filename

  psOut.setOutputFileName(tmpFile.name());
  psOut.setFullPage(true);

  // painting the pixmap to the "printer" which is a file
  p.begin( &psOut );
  // Qt uses the clip rect for the bounding box
  p.setClipRect( 0, 0, imageio->image().width(), imageio->image().height(), TQPainter::CoordPainter);
  p.drawImage( TQPoint( 0, 0 ), imageio->image() );
  p.end();

  // Copy file to imageio struct
  TQFile inFile(tmpFile.name());
  inFile.open( IO_ReadOnly );

  TQTextStream in( &inFile );
  in.setEncoding( TQTextStream::Latin1 );
  TQTextStream out( imageio->ioDevice() );
  out.setEncoding( TQTextStream::Latin1 );

  TQString szInLine = in.readLine();
  out << szInLine << '\n';

  while( !in.atEnd() ){
    szInLine = in.readLine();
    out << szInLine << '\n';
  }

  inFile.close();

  imageio->setqStatus(0);
}