diff options
Diffstat (limited to 'doc/kleopatra/index.docbook')
| -rw-r--r-- | doc/kleopatra/index.docbook | 1458 |
1 files changed, 1458 insertions, 0 deletions
diff --git a/doc/kleopatra/index.docbook b/doc/kleopatra/index.docbook new file mode 100644 index 000000000..ba4672156 --- /dev/null +++ b/doc/kleopatra/index.docbook @@ -0,0 +1,1458 @@ +<?xml version="1.0" ?> +<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [ + <!ENTITY kleopatra "<application>Kleopatra</application>"> + <!ENTITY kwatchgnupg "<application>KWatchGnuPG</application>"> + <!ENTITY gpgsm "<application>GpgSM</application>"> + <!ENTITY gpg "<application>GPG</application>"> + <!ENTITY gpgconf "<application>GpgConf</application>"> + <!ENTITY kappname "&kleopatra;"> + <!ENTITY package "kdepim"> + <!ENTITY smime "<acronym>S/MIME</acronym>"> + <!ENTITY % addindex "IGNORE"> + <!ENTITY % English "INCLUDE"> + + <!ENTITY dn "<acronym>DN</acronym>"> + <!ENTITY ca "<acronym>CA</acronym>"> + + <!-- Expanded all entities to make them translatable - lueck + FILE menu + <!ENTITY file-new-key-pair "<menuchoice><guimenu>File</guimenu><guimenuitem>New Key Pair...</guimenuitem></menuchoice>"> + <!ENTITY file-export-certificates "<menuchoice><guimenu>File</guimenu><guimenuitem>Export Certificates...</guimenuitem></menuchoice>"> + <!ENTITY file-export-secret-key "<menuchoice><guimenu>File</guimenu><guimenuitem>Export Secret key...</guimenuitem></menuchoice>"> + <!ENTITY file-import-certificates "<menuchoice><guimenu>File</guimenu><guimenuitem>Import Certificates...</guimenuitem></menuchoice>"> + <!ENTITY file-import-crls "<menuchoice><guimenu>File</guimenu><guimenuitem>Import CRLs...</guimenuitem></menuchoice>"> + <!ENTITY file-quit "<menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>Q</keycap></keycombo></shortcut><guimenu>File</guimenu><guimenuitem>Quit</guimenuitem></menuchoice>"> + + VIEW menu + <!ENTITY view-redisplay "<menuchoice><shortcut><keycombo action="simul"><keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Redisplay</guimenuitem></menuchoice>"> + <!ENTITY view-stop-operation "<menuchoice><shortcut><keycombo action="simul"><keycap>Esc</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Stop Operation</guimenuitem></menuchoice>"> + <!ENTITY view-certificate-details "<menuchoice><guimenu>View</guimenu><guimenuitem>Certificate Details...</guimenuitem></menuchoice>"> + <!ENTITY view-hierarchical-key-list "<menuchoice><guimenu>View</guimenu><guimenuitem>Hierarchical Key List</guimenuitem></menuchoice>"> + <!ENTITY view-expand-all "<menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>.</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Expand All</guimenuitem></menuchoice>"> + <!ENTITY view-collapse-all "<menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>,</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Collapse All</guimenuitem></menuchoice>"> + + CERTIFICATES menu + <!ENTITY certificates-validate "<menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo></shortcut><guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice>"> + <!ENTITY certificates-refresh-crls "<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem></menuchoice>"> + <!ENTITY certificates-delete "<menuchoice><shortcut><keycombo action="simul"><keycap>Delete</keycap></keycombo></shortcut><guimenu>Certificates</guimenu><guimenuitem>Delete</guimenuitem></menuchoice>"> + <!ENTITY certificates-download "<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Download</guimenuitem></menuchoice>"> + + CRLS menu + <!ENTITY crls-clear-crl-cache "<menuchoice><guimenu>CRLs</guimenu><guimenuitem>Clear CRL Cache...</guimenuitem></menuchoice>"> + <!ENTITY crls-dump-crl-cache "<menuchoice><guimenu>CRLs</guimenu><guimenuitem>Dump CRL Cache...</guimenuitem></menuchoice>"> + + TOOLS menu + <!ENTITY tools-gnupg-log-viewer "<menuchoice><guimenu>Tools</guimenu><guimenuitem>GnuPG Log Viewer...</guimenuitem></menuchoice>"> + + SETTINGS menu + <!ENTITY settings-show-statusbar "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Show Statusbar</guimenuitem></menuchoice>"> + <!ENTITY settings-configure-shortcuts "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure Shortcuts...</guimenuitem></menuchoice>"> + <!ENTITY settings-configure-kleopatra "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure &kleopatra;...</guimenuitem></menuchoice>"> + <!ENTITY settings-configure-gpgme-backend "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure GpgME Backend...</guimenuitem></menuchoice>"> + --> + + <!-- Command line options --> + <!ENTITY commandline-option-external "<option>--external</option>"> + <!ENTITY commandline-option-query "<option>--query</option>"> + <!ENTITY commandline-option-import-certificate "<option>--import-certificate</option>"> +]> + +<book lang="&language;"> + +<bookinfo> +<title>The &kleopatra; Handbook</title> + +<authorgroup> +<author> +<firstname>Marc</firstname> +<surname>Mutz</surname> +<affiliation> +<address><email>marc@klaralvdalens-datakonsult.se</email></address> +</affiliation> +</author> + +<othercredit role="developer"> +<firstname>David</firstname> +<surname>Faure</surname> +<contrib>Developer</contrib> +</othercredit> + +<othercredit role="developer"> +<firstname>Steffen</firstname> +<surname>Hansen</surname> +<affiliation> +<address>&Steffen.Hansen.mail;</address> +</affiliation> +<contrib>Developer</contrib> +</othercredit> + +<othercredit role="developer"> +<firstname>Matthias Kalle</firstname> +<surname>Dalheimer</surname> +<contrib>Developer</contrib> +</othercredit> + +<othercredit role="developer"> +<firstname>Jesper</firstname> +<surname>Pedersen</surname> +<affiliation> +<address>&Jesper.Pedersen.mail;</address> +</affiliation> +<contrib>Developer</contrib> +</othercredit> +<othercredit role="developer"> +<firstname>Daniel</firstname> +<surname>Molkentin</surname> +<affiliation> +<address>&Daniel.Molkentin.mail;</address> +</affiliation> +<contrib>Developer</contrib> +</othercredit> + +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<legalnotice>&GPLNotice;</legalnotice> + +<date>2004-06-11</date> +<releaseinfo>0.31</releaseinfo> + +<abstract> +<para> +&kleopatra; is a tool for managing X.509 certificates. +</para> +</abstract> + + +<keywordset> +<keyword>KDE</keyword> +<keyword>Kapp</keyword> +<keyword>X509</keyword> +<keyword>LDAP</keyword> +<keyword>gpg</keyword> +<keyword>gpgsm</keyword> +</keywordset> + +</bookinfo> + +<chapter id="introduction"> <title>Introduction</title> + +<para>&kleopatra; is the &kde; tool for managing X.509 certificates in +the &gpgsm; keybox and for retrieving certificates from +<acronym>LDAP</acronym> servers.</para> + +<para>&kleopatra; can be started from &kmail;'s <guimenu>Tools</guimenu> +menu, as well as from the command line. The &kleopatra; executable is +named <userinput><command>kleopatra</command></userinput>.</para> + +<note><para>This program is named after Cleopatra, a famous female +Egyptian pharaoh that lived at the time of Julius Caesar, whom she is +said to have had an intimate relationship with.</para> + +<para>The name was chosen since this program originates from the +<ulink url="http://www.gnupg.org/aegypten2/">Ägypten +Projects</ulink> (Ägypten is German for Egypt). Kleopatra is the +German spelling of Cleopatra.</para></note> + +</chapter> + +<chapter id="functions"><title>Main Functions</title> + +<sect1 id="functions-view"><title>Viewing the Local Keybox</title> + +<!-- Viewing and Refreshing, also Validation --> + +<para>&kleopatra;'s main function is to display and edit the contents +of the local keybox, which is similar to &gpg;'s concept of keyrings, +albeit one should not stretch this analogy too much.</para> + +<para>The main window is divided into the large key listing area, the +menubar and the <link linkend="functions-search">search bar</link> on +top, and a status bar at the bottom.</para> + +<para>Each line in the key list corresponds to one certificate, +identified by the so-called <guilabel>Subject &dn;</guilabel>. &dn; is +an acronym for <quote>Distinguished Name</quote>, a hierarchical +identifier, much like a file system path with an unusual syntax, that is +supposed to globally uniquely identify a given certificate.</para> + +<para>To be valid, and thus usable, (public) keys need to be signed by +a &ca; (Certification Authority). These signatures are called +certificates, but usually the terms <quote>certificate</quote> and +<quote>(public) key</quote> are used interchangeably, and we will not +distinguish between them in this manual either, except when explicitly +noted. The name of the &ca; which issued the certificate (its &dn;) +is shown in the <guilabel>Issuer &dn;</guilabel> column.</para> + +<para>&ca;s must in turn be signed by other &ca;s to be valid. Of +course, this must end somewhere, so the top-level &ca; (root-&ca;) +signs its key with itself (this is called a self-signature). Root +certificates thus need to be assigned validity (commonly called trust) +manually, ⪚ after comparing the fingerprint with the one on the +website of the &ca;. This is typically done by the system administrator or +the vendor of a product using certificates, but can be done by the +user via &gpgsm;'s command line interface.</para> + +<para>To see which of the certificates are root certificates, you can +either compare <guilabel>Subject &dn;</guilabel> and <guilabel>Issuer +&dn;</guilabel>, or you switch to hierarchical keylist mode with <link +linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu> +<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link>.</para> + +<para>You can see the details of any certificate by double-clicking it +or using <link linkend="view-certificate-details"><menuchoice><guimenu>View</guimenu> +<guimenuitem>Certificate Details...</guimenuitem></menuchoice></link>. This opens a +dialog that shows the most common properties of the certificate, its +certificate chain (&ie; the chain of issuers up to the root-&ca;), and +a dump of all information the backend is able to extract from the +certificate.</para> + +<para>If you change the keybox without using &kleopatra; (⪚ using +&gpgsm;'s command line interface), you can refresh the view with <link +linkend="view-redisplay"><menuchoice><shortcut><keycombo action="simul"> +<keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu> +<guimenuitem>Redisplay</guimenuitem></menuchoice></link>.</para> + +<para>Since validating a key may take some time (⪚ CRLs might need +to be fetched), the normal keylisting does not attempt to check the +validity of keys. For this, <link linkend="certificates-validate"> +<menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo> +</shortcut><guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice></link>, a +special variant of <link +linkend="view-redisplay"><menuchoice><shortcut><keycombo action="simul"> +<keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu> +<guimenuitem>Redisplay</guimenuitem></menuchoice></link>, is provided. It +either checks the selected certificates, or all keys if none are +selected.</para> + +</sect1> + +<sect1 id="functions-search"><title>Searching and Importing Certificates</title> + +<para>Most of the time, you will acquire new certificates by verifying +signatures in emails, since certificates are embedded in the +signatures made using them most of the time. However, if you need to +send a mail to someone you have not yet had contact with, you need to +fetch the certificate from an LDAP directory (although &gpgsm; can do +this automatically), or from a file. You also need to import your own +certificate after receiving the &ca; answer to your certification +request.</para> + +<para>To search for a certificate in an LDAP directory, switch the +dropdown menu of the search bar from <guilabel>in Local +Certificates</guilabel> to <guilabel>in External +Certificates</guilabel>, enter some text (⪚ the name of the person +you want the certificate for) into the line edit, and click on the +<guilabel>Find</guilabel> icon. The results will be displayed in the +key list below the search bar, where you can select certificates to +either look at them with <link linkend="view-certificate-details"> +<menuchoice><guimenu>View</guimenu><guimenuitem>Certificate Details...</guimenuitem></menuchoice></link> or +download them with <link linkend="certificates-download"> +<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Download</guimenuitem></menuchoice></link> into the +local keybox. Note that you can also download the certificate from the +details dialog, using the <guilabel>Import to Local</guilabel> +button.</para> + +<para>You can configure the list of LDAP servers to search in the +<link linkend="configuration-directory-services"><guilabel>Directory +Services</guilabel></link> page of &kleopatra;'s <link +linkend="configuration">configure dialog</link>.</para> + +<para>If you received the certificate as a file, try <link +linkend="file-import-certificates"><menuchoice><guimenu>File</guimenu> +<guimenuitem>Import Certificates...</guimenuitem></menuchoice></link>. &gpgsm; needs to understand the +format of the certificate file; please refer to &gpgsm;'s manual for a +list of supported file formats.</para> + +<para>If you did not <link linkend="functions-newkey">create your +keypair with &gpgsm;</link>, you also need to manually import the +public key (as well as the secret key) from the PKCS#12 file you got from +the &ca;. You can do this on the command line with <link +linkend="commandline-option-import-certificate"><userinput><command>kleopatra +&commandline-option-import-certificate; +<filename>filename</filename></command></userinput></link> or from +within &kleopatra; with <link +linkend="file-import-certificates"><menuchoice><guimenu>File</guimenu> +<guimenuitem>Import Certificates...</guimenuitem></menuchoice></link>, +just as you would to for <quote>normal</quote> certificates.</para> + +</sect1> + +<sect1 id="functions-newkey"><title>Creating New Key Pairs</title> + +<para>The menu item <link linkend="file-new-key-pair"><menuchoice> +<guimenu>File</guimenu><guimenuitem>New Key Pair...</guimenuitem></menuchoice></link> starts the +certificate-request-creating wizard which will guide you through a +number of steps to create a certificate request; this request can, on the +last page of the wizard, either be sent to a certificate authority (&ca;) +to be signed or saved to a file (for example to a floppy, so it can be +shipped to the &ca;).</para> <para>Whenever you are done with a step in +the wizard, press <guibutton>Next</guibutton> to go to the next step +(or <guibutton>Back</guibutton> to review steps that are already +completed). The certificate request creation can be canceled at any +time by pressing the <guibutton>Cancel</guibutton> button. +</para> +<para>The first step in the wizard is to type in your personal data +for the certificate. The fields to fill out are: +<itemizedlist> +<listitem> +<para><guilabel>Name:</guilabel> Your name;</para> +</listitem> +<listitem> +<para><guilabel>Location:</guilabel>The town or city in which you live;</para> +</listitem> +<listitem> +<para><guilabel>Organization:</guilabel>The organization you represent +(for example, the company you work for);</para> +</listitem> +<listitem> +<para><guilabel>Department:</guilabel>The organizational unit you are +in (for example, "Logistics");</para> +</listitem> +<listitem> +<para><guilabel>Country code:</guilabel>The two letter code for the +country in which you are living (for example, "US");</para> +</listitem> +<listitem> +<para><guilabel>Email address:</guilabel>Your email address; be sure +to type this in correctly—this will be the address people will be +sending mail to when they use your certificate.</para> +</listitem> +</itemizedlist> +</para><para> +The next step in the wizard is to select whether to store the +certificate in a file or send it directly to a &ca;. You will have to +specify the filename or email address to send the certificate request to. +</para></sect1> + + +<sect1 id="functions-keybox-management"><title>Keybox Management</title> + +<para>In addition to <link linkend="functions-view">list and +validate</link>, <link linkend="functions-search">search and +import</link> certificates and <link +linkend="functions-newkey">creating new ones</link>, &kleopatra; also +has some less often used functions that help you manage your local +keybox.</para> + +<para>These functions include deleting certificates from the local +keybox with <link linkend="certificates-delete"><menuchoice><shortcut> +<keycombo action="simul"><keycap>Delete</keycap></keycombo></shortcut> +<guimenu>Certificates</guimenu><guimenuitem>Delete</guimenuitem></menuchoice></link>, as well +as manual handling of CRLs (<link linkend="certificates-refresh-crls"> +<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem> +</menuchoice></link>, <link linkend="crls-clear-crl-cache"><menuchoice><guimenu>CRLs</guimenu> +<guimenuitem>Clear CRL Cache...</guimenuitem></menuchoice></link>, <link +linkend="crls-dump-crl-cache"><menuchoice><guimenu>CRLs</guimenu> +<guimenuitem>Dump CRL Cache...</guimenuitem></menuchoice></link>).</para> + +</sect1> + +</chapter> + +<chapter id="menu"><title>Menu Reference</title> + +<sect1 id="menufile"><title>File Menu</title> + +<variablelist> + +<varlistentry id="file-new-key-pair"> +<term><menuchoice><guimenu>File</guimenu><guimenuitem>New Key Pair...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Creates a new key pair (public and private)</action> and +allows to send the public part to a certification authority +(&ca;) for signing. The resulting certificate is then +sent back to you, or stored in an LDAP server for you to download into +your local keybox, where you can use it to sign and decrypt +mails.</para> + +<para>This mode of operation is called <quote>decentralized key +generation</quote>, since all keys are created locally. &kleopatra; +(and &gpgsm;) do not support <quote>centralized key generation</quote> +directly, but you can import the public/secret key bundle that you +receive from the &ca; in PKCS#12 format via <menuchoice><guimenu>File</guimenu> +<guimenuitem>Import Certificates...</guimenuitem></menuchoice>.</para> +</listitem> +</varlistentry> + + +<varlistentry id="file-export-certificates"> +<term><menuchoice><guimenu>File</guimenu><guimenuitem>Export Certificates...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Exports the selected certificates</action> into a file.</para> + +<note><para>This exports only the public keys, even if the +secret key is available. Use <menuchoice><guimenu>File</guimenu><guimenuitem>Export +Secret key...</guimenuitem></menuchoice> to export both +public and secret keys into a file, but note that this is almost +always a bad idea.</para></note> +</listitem> +</varlistentry> + + +<varlistentry id="file-export-secret-key"> +<term><menuchoice><guimenu>File</guimenu><guimenuitem>Export Secret key...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Exports both the public and the secret key to a +(PKCS#12) file.</action></para> + +<warning><para>It should rarely be necessary to use this function, and +if it is, it should be carefully planned. Planning the migration of a +secret key involves choice of transport media and secure deletion of +the key data on the old machine, as well as the transport medium, +among other things.</para></warning> +</listitem> +</varlistentry> + + +<varlistentry id="file-import-certificates"> +<term><menuchoice><guimenu>File</guimenu><guimenuitem>Import Certificates...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Imports certificates and/or secret keys from files into +the local keybox.</action></para> + +<para>The format of the certificate file must be supported by +&gpgsm;. Please refer to the &gpgsm; manual for a list of supported +formats.</para> +</listitem> +</varlistentry> + + +<varlistentry id="file-import-crls"> +<term><menuchoice><guimenu>File</guimenu><guimenuitem>Import CRLs...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Lets you manually import CRLs from +files.</action></para> + +<para>Normally, Certificate Revocation Lists (CRLs) are handled +transparently by the backend, but it can sometimes be useful to +import a CRL manually into the local CRL cache.</para> + +<note><para>For CRL import to work, the +<application>dirmngr</application> tool must be in the search +<varname>PATH</varname>. If this menu item is disabled, you should +contact the system administrator and ask them to install +<application>dirmngr</application>.</para></note> + +<para>You can view the contents of the local CRL cache from the menu +item <menuchoice><guimenu>CRLs</guimenu><guimenuitem>Dump CRL Cache...</guimenuitem> +</menuchoice>. This will display a dialog with +information about the CRLs in the cache and the fingerprints of the +certificates in each CRL. +</para> +</listitem> +</varlistentry> + + +<varlistentry id="file-quit"> +<term><menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>Q</keycap></keycombo></shortcut> +<guimenu>File</guimenu><guimenuitem>Quit</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Terminates &kleopatra;.</action></para> +</listitem> +</varlistentry> + +</variablelist> + +</sect1> <!-- File Menu --> + + + +<sect1 id="menuview"><title>View Menu</title> + +<variablelist> + +<varlistentry id="view-redisplay"> +<term><menuchoice><shortcut><keycombo action="simul"><keycap>F5</keycap></keycombo> +</shortcut><guimenu>View</guimenu><guimenuitem>Redisplay</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Redisplays the selected certificates or refreshes the +certificate list.</action></para> + +<para>If there are selected certificates, the refresh operation is +restricted to those selected entries.</para> + +<para>If a query result (either remote or local) is currently +displayed, the query is re-issued and the new results are displayed in +place of the old ones.</para> + +<para>If no query has been performed, the whole keybox contents is +re-fetched and re-displayed.</para> + +<para>You can use this if you have changed the contents of +the keybox by other means than &kleopatra; (⪚ by using &gpgsm;'s +command line interface).</para> +</listitem> +</varlistentry> + + +<varlistentry id="view-stop-operation"> +<term><menuchoice><shortcut><keycombo action="simul"><keycap>Esc</keycap></keycombo></shortcut> +<guimenu>View</guimenu><guimenuitem>Stop Operation</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Stops (cancels) all pending operations,</action> ⪚ a +search or a download.</para> + +<note><para>Depending on the server used, cancelling a remote search +can block &kleopatra; for a few seconds while waiting for the backend +to complete the procedure. This is normal and expected +behavior.</para></note> +</listitem> +</varlistentry> + + +<varlistentry id="view-certificate-details"> +<term><menuchoice><guimenu>View</guimenu><guimenuitem>Certificate Details...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Shows the details of the currently selected +certificate.</action></para> + +<para>This function is also available by double-clicking the +corresponding item in the list view directly.</para> + +<!--FIXME: link to the dialog's help, but where do we put _that_?--> +</listitem> +</varlistentry> + + +<varlistentry id="view-hierarchical-key-list"> +<term><menuchoice><guimenu>View</guimenu><guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></term> + +<listitem> +<para><action> Toggles between hierarchical and flat keylist mode. +</action></para> + +<para>In hierarchical mode, certificates are arranged in +issuer/subject relation, so it is easy to see to which certification +hierarchy a given certificate belongs, but a given certificate is +harder to find initially (though you can of course use the +<link linkend="functions-search">search bar</link>).</para> + +<para>In flat mode, all certificates are displayed in a flat list, +sorted alphabetically. In this mode, a given certificate is easy to +find, but it is not directly clear which root certificate it belongs +to.</para> +</listitem> +</varlistentry> + + +<varlistentry id="view-expand-all"> +<term><menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>.</keycap> +</keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Expand All</guimenuitem></menuchoice></term> + +<listitem> +<para>(This function is only available when <link +linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu> +<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link> is on.)</para> + +<para><action>Expands all list items in the certificate list +view,</action> &ie; makes all items visible.</para> + +<para>This is the default when entering hierarchical keylist +mode.</para> + +<para>You can still expand and collapse each individual item by +itself, of course.</para> +</listitem> +</varlistentry> + + + +<varlistentry id="view-collapse-all"> +<term><menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>,</keycap> +</keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Collapse All</guimenuitem></menuchoice></term> + +<listitem> +<para>(This function is only available when <link +linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu> +<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link> is on.)</para> + +<para><action>Collapses all list items in the certificate list +view,</action> &ie; hides all but the top-level items.</para> + +<para>You can still expand and collapse each individual item by +itself, of course.</para> +</listitem> +</varlistentry> + +</variablelist> + +</sect1> + +<sect1 id="menucertificates"><title>Certificates Menu</title> + +<variablelist> + +<varlistentry id="certificates-validate"> +<term><menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo> +</shortcut><guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Validates selected (or all) keys.</action></para> + +<para>This is similar to <link +linkend="view-redisplay"><menuchoice><shortcut><keycombo action="simul"> +<keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu> +<guimenuitem>Redisplay</guimenuitem></menuchoice></link>, but +performs a validation of the (selected) keys. Validation here means +that all relevant CRLs are fetched, and the certificate chain is +checked for correctness. As a result, invalid or expired keys will be +marked according to your color and font preferences set in the <link +linkend="configuration-appearance"><guilabel>Appearance</guilabel> +page</link> of &kleopatra;'s <link linkend="configuration">configure +dialog</link>.</para> + +<warning><para>You can only rely on information from validated keys, +and, since any of them may be revoked at any time, even validation is +only ever a snapshot of the current state of the local keyring. This +is why the backend normally performs such checks whenever the keys +are used (⪚ for signing, signature verification, encryption or +decryption).</para></warning> +</listitem> +</varlistentry> + + + +<varlistentry id="certificates-refresh-crls"> +<term><menuchoice><guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Fetches the current CRLs for all selected keys,</action> +even though they would normally not be fetched when using the +key.</para> + +<para>This function only has an effect on certificates which define a +CRL distribution point. Depending on the backend used, certificates +configured to perform checks using OCSP will not be updated.</para> + +<para>You may use this ⪚ if you have sideband knowledge that a key +has been revoked, and you want the backend to reflect this +<emphasis>now</emphasis> instead of relying on this to automatically +happen at the next scheduled CRL update.</para> + +<warning><para>Excessive use of this function might put a high load on +your provider's or company's network, since CRLs of large +organizations can be surprisingly big (several megabytes are not +uncommon).</para> + +<para>Use this function scarcely.</para></warning> +</listitem> +</varlistentry> + + + +<varlistentry id="certificates-delete"> +<term><menuchoice><shortcut><keycombo action="simul"><keycap>Delete</keycap></keycombo></shortcut> +<guimenu>Certificates</guimenu><guimenuitem>Delete</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Deletes selected certificate(s)</action> from the local keyring.</para> + +<para>Use this function to remove unused keys from your local +keybox. However, since certificates are typically attached to signed +emails, verifying an email might result in the key just removed to pop +back into the local keybox. So it is probably best to avoid using this +function as much as possible. When you are lost, use the <link +linkend="functions-search">search bar</link> or the <link +linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu> +<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link> function to regain control over +the lot of certificates.</para> +</listitem> +</varlistentry> + + + +<varlistentry id="certificates-download"> +<term><menuchoice><guimenu>Certificates</guimenu><guimenuitem>Download</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Downloads the selected certificate(s) from the LDAP to the local keybox.</action></para> +</listitem> +</varlistentry> + +</variablelist> + +</sect1> + + + +<sect1 id="menucrls"><title>CRLs Menu</title> + +<variablelist> + +<varlistentry id="crls-clear-crl-cache"> +<term><menuchoice><guimenu>CRLs</guimenu><guimenuitem>Clear CRL Cache...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Clears the &gpgsm; CRL cache.</action></para> + +<para>You probably never need this. You can force a refresh of the CRL +cache by selecting all certificates and using <link linkend="certificates-refresh-crls"><menuchoice> +<guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem></menuchoice></link> instead.</para> +</listitem> +</varlistentry> + +<varlistentry id="crls-dump-crl-cache"> +<term><menuchoice><guimenu>CRLs</guimenu><guimenuitem>Dump CRL Cache...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Shows the detailed contents of the &gpgsm; CRL +cache.</action></para> +</listitem> +</varlistentry> + +</variablelist> + +</sect1> + +<sect1 id="menutools"><title>Tools Menu</title> + +<variablelist> + +<varlistentry id="tools-gnupg-log-viewer"> +<term><menuchoice><guimenu>Tools</guimenu><guimenuitem>GnuPG Log Viewer...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Starts <ulink url="help:/kwatchgnupg/index.html">&kwatchgnupg;</ulink></action></para> +</listitem> +</varlistentry> + +</variablelist> + +</sect1> + +<sect1 id="menusettings"><title>Settings Menu</title> + +<variablelist> + +<varlistentry id="settings-show-statusbar"> +<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Show Statusbar</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Toggles the visibility of the bottom status bar.</action></para> +</listitem> +</varlistentry> + +<varlistentry id="settings-configure-shortcuts"> +<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure Shortcuts...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Opens the standard &kde; shortcut configuration dialog, +where you can assign and re-assign keyboard shortcuts for all menu +items.</action></para> +</listitem> +</varlistentry> + +<varlistentry id="settings-configure-kleopatra"> +<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure &kleopatra;...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Opens &kleopatra;'s configure dialog.</action></para> + +<para>See <xref linkend="configuration"/> for more details.</para> +</listitem> +</varlistentry> + +<varlistentry id="settings-configure-gpgme-backend"> +<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure GpgME Backend...</guimenuitem></menuchoice></term> + +<listitem> +<para><action>Opens a dialog that allows you to configure every aspect of +&gpgsm; and other backend modules.</action></para> + +<para>This dialog is dynamically built from the output of the +&gpgconf; utility and may thus change when backend modules are +updated.</para> +</listitem> +</varlistentry> + +</variablelist> + +</sect1> + +<sect1 id="menuhelp"><title>Help Menu</title> + + +<para>The <guimenu>Help</guimenu> menu contains the standard &kde; +help menu.</para> + +&help.menu.documentation; + +</sect1> + +</chapter> + +<chapter id="commandline-options"><title>Command Line Options Reference</title> + +<para>Only the options specific to &kleopatra; are listed here. As +with all &kde; applications, you can get a complete list of options +by issuing the command <userinput><command>kleopatra +<option>--help</option></command></userinput>.</para> + +<variablelist> + +<varlistentry id="commandline-option-external"> +<term>&commandline-option-external;</term> + +<listitem> +<para><action>Specifies that &commandline-option-query; shall search +remotely instead of in the local keybox.</action></para> +</listitem> +</varlistentry> + +<varlistentry id="commandline-option-query"> +<term>&commandline-option-query;</term> + +<listitem> +<para><action>Specifies that &kleopatra; shall start with the given +query string instead of listing the complete local +keybox.</action></para> +</listitem> +</varlistentry> + +<varlistentry id="commandline-option-import-certificate"> +<term>&commandline-option-import-certificate;</term> + +<listitem> +<para><action>Specifies a file or URL from which to import +certificates (or secret keys) from.</action></para> + +<para>This is the command line equivalent of <link +linkend="file-import-certificates"><menuchoice><guimenu>File</guimenu> +<guimenuitem>Import Certificates...</guimenuitem></menuchoice></link>.</para> +</listitem> +</varlistentry> + +</variablelist> + +</chapter> + +<chapter id="configuration"><title>Configuring &kleopatra;</title> + +<para>&kleopatra;'s configure dialog can be accessed via <link +linkend="settings-configure-kleopatra"><menuchoice><guimenu>Settings</guimenu> +<guimenuitem>Configure &kleopatra;...</guimenuitem></menuchoice></link>.</para> + +<para>Each of its pages is described in the sections below.</para> + +<sect1 id="configuration-directory-services"><title>Configuring Directory Services</title> + +<para>On this page, you can configure which LDAP servers to use for +certificate searches. You can also configure their order, as well as +some selected LDAP-related settings from the dynamic backend +configuration dialog, available via <link +linkend="settings-configure-gpgme-backend"><menuchoice><guimenu>Settings</guimenu> +<guimenuitem>Configure GpgME Backend...</guimenuitem></menuchoice></link>.</para> + +<para>To add a new server, click on the <guilabel>Add +Service...</guilabel> button. In the dialog that appears, you can set +the <guilabel>Server name</guilabel>, the <guilabel>Port</guilabel> +(preset to the default LDAP port), the <guilabel>Base &dn;</guilabel> +(sometimes referred to as the search root or search base), and the +usual <guilabel>User name</guilabel> and +<guilabel>Password</guilabel>, both of which are only needed if the +server requires authentication. Clicking <guilabel>OK</guilabel> adds +the server details to the list of servers, while +<guilabel>Cancel</guilabel> dismisses the input.</para> + +<para>To remove a server from the search list, select it in the list, +then press the <guilabel>Remove Service</guilabel> button.</para> + +<para>To change the relative search order of servers, select one of +them and move it up or down with the arrow buttons right next to the +list.</para> + +<para>To set the LDAP timeout, &ie; the maximum time the backend will +wait for a server to respond, simply use the corresponding input field +labelled <guilabel>LDAP timeout</guilabel>.</para> + +<para>If one of your servers has a large database, so that even +reasonable searches like <userinput>Smith</userinput> hit the +<guilabel>maximum number of items returned by query</guilabel>, you +might want to increase this limit. You can find out easily if you hit +the limit during a search, since a dialog box will pop up in that +case, telling you that the results have been truncated.</para> + +<note><para>Some servers may impose their own limits on the number of +items returned from a query. In this case, increasing the limit here +will not result in more returned items.</para></note> + +</sect1> + +<sect1 id="configuration-appearance"><title>Configuring Visual Appearance</title> + +<para>&kleopatra; allows you to customize the appearance of +(validated) keys in the list view. This includes the foreground (text) +and background colors, as well as the font.</para> + +<para>Each <guilabel>Key Category</guilabel> on the left is assigned a +set of colors and a font in which keys belonging to that category are +displayed. The category list also acts as a preview of the +settings. Categories can be freely defined by the administrator or the +power user, see <xref linkend="admin-key-filters"/> in <xref +linkend="admin"/>.</para> + +<para>To change the text (foreground) color of a category, select it +in the list, and press the <guilabel>Set Text Color...</guilabel> +button. The standard &kde; color selection dialog will appear where +you can select or create a new color.</para> + +<para>Changing the background color is done in the same way, just press +<guilabel>Set Background Color...</guilabel> instead.</para> + +<para>To change the font, you basically have two options:</para> + +<orderedlist> +<listitem><para>Modify the standard font, used for all list views in +&kde;</para></listitem> +<listitem><para>Use a custom font.</para></listitem> +</orderedlist> + +<para>The first option has the advantage that the font will follow +whichever style you choose &kde;-wide, whereas the latter gives you +full control over the font to use. The choice is yours.</para> + +<para>To use the modified standard font, select the category in the +list, and check or uncheck the font modifiers +<guilabel>Italic</guilabel>, <guilabel>Bold</guilabel>, and/or +<guilabel>Strikeout</guilabel>. You can immediately see the effect on +the font in the category list.</para> + +<para>To use a custom font, press the <guilabel>Set Font...</guilabel> +button. The standard &kde; font selection dialog will appear where you +can select the new font. Note that you can still use the font +modifiers to change the custom font, just as for modifying the +standard font.</para> + +<para>To switch back to the standard font, you need to press the +<guilabel>Default Appearance</guilabel> button.</para> + +</sect1> + +<sect1 id="configuration-dn-order"><title>Configuring the Order &dn; Attributes are Shown</title> + +<para>Although &dn;s are hierarchical, the order of the individual +components (called relative &dn;s (RDNs), or &dn; attributes) is not +defined. The order in which the attributes are shown is thus a matter +of personal taste or company policy, which is why it is configurable in +&kleopatra;.</para> + +<note><para>This setting does not only apply to &kleopatra;, but to all +applications using &kleopatra; Technology. At the time of this +writing, these include &kmail;, &kaddressbook;, as well as &kleopatra; +itself, of course.</para></note> + +<para>This configuration page basically consists of two lists, one for +the known attributes (<guilabel>Available attributes</guilabel>), and +one describing the <guilabel>Current attribute order</guilabel>.</para> + +<para>Both lists contain entries described by the short from of the +attribute (⪚ <guilabel>CN</guilabel>) as well as the spelled-out +form (<guilabel>Common Name</guilabel>).</para> + +<para>The <guilabel>Available attributes</guilabel> list is always +sorted alphabetically, while the <guilabel>Current attribute +order</guilabel> list's order reflects the configured &dn; attribute +order: the first attribute in the list is also the one displayed +first.</para> + +<para>Only attributes explicitly listed in the <guilabel>Current +attribute order</guilabel> list are displayed at all. The rest is +hidden by default.</para> + +<para>However, if the placeholder entry <guilabel>_X_</guilabel> +(<guilabel>All others</guilabel>) is in the <quote>current</quote> +list, all unlisted attributes (whether known or not), are inserted at +the point of <guilabel>_X_</guilabel>, in their original relative +order.</para> + +<para>A small example will help to make this more clear:</para> + +<informalexample> +<para>Given the &dn;</para> +<blockquote> +<para> + O=KDE, C=US, CN=Dave Devel, X-BAR=foo, OU=Kleopatra, X-FOO=bar, +</para> +</blockquote> +<para>the default attribute order of <quote>CN, L, _X_, OU, O, +C</quote> will produce the following formatted &dn;:</para> +<blockquote> +<para> + CN=Dave Devel, X-BAR=foo, X-FOO=bar, OU=Kleopatra, O=KDE, C=US +</para> +</blockquote> +<para>while <quote>CN, L, OU, O, C</quote> will produce</para> +<blockquote> +<para> + CN=Dave Devel, OU=Kleopatra, O=KDE, C=US +</para> +</blockquote> +</informalexample> + +<para>To add an attribute to the display order list, select it in the +<guilabel>Available attributes</guilabel> list, and press the +<guilabel>Add to current attribute order</guilabel> button.</para> + +<para>To remove an attribute from the display order list, select it in +the <guilabel>Current attribute order</guilabel> list, and press the +<guilabel>Remove from current attribute order</guilabel> button.</para> + +<para>To move an attribute to the beginning (end), select it in the +<guilabel>Current attribute order</guilabel> list, and press the +<guilabel>Move to top</guilabel> (<guilabel>Move to bottom</guilabel>) +button.</para> + +<para>To move an attribute up (down) one slot only, select it in the +<guilabel>Current attribute order</guilabel> list, and press the +<guilabel>Move one up</guilabel> (<guilabel>Move one down</guilabel>) +button.</para> + +</sect1> + +</chapter> + +<chapter id="admin"><title>Administrator's Guide</title> + +<para>This Administrator's Guide describes ways to customize &kleopatra; that +are not accessible via the &GUI;, but only via config files.</para> + +<para>It is assumed that the reader is familiar with the technology +used for &kde; application configuration, including layout, +file system location and cascading of &kde; config files, as well as +the KIOSK framework.</para> + +<sect1 id="admin-certificate-request-wizard"><title>Customization of the Certificate-Creation Wizard</title> + +<para>&kleopatra; allows you to customize the fields that the user is +allowed to enter in order to create their certificate.</para> + +<para>Create a group called +<literal>CertificateCreationWizard</literal> in the system-wide +<filename>kleopatrarc</filename>. If you want a custom order of +attributes or if you only want certain items to appear, create a key +called <varname>DNAttributeOrder</varname>. The argument is one or +more of <varname>CN,SN,GN,L,T,OU,O,PC,C,SP,DC,BC,EMAIL</varname> If +you want to initialize fields with a certain value, write something like +Attribute=value. If you want the attribute to be treated as a required +one, append an exclamation mark +(e.g. <varname>CN!,L,OU,O!,C!,EMAIL!</varname>, which happens to be +the default configuration).</para> + +<para> Using the <acronym>KIOSK</acronym> mode modifier +<varname>$e</varname> allows to retrieve the values from +environment variables or from an evaluated script or binary. If you +want to disallow editing of the respective field in addition, use the +modifier <varname>$i</varname>. If you want to disallow the use +<guibutton>Insert My Address</guibutton> button, set +<varname>ShowSetWhoAmI</varname> to false.</para> + +<tip><para> Due to the nature of the &kde; <acronym>KIOSK</acronym> +framework, using the immutable flag (<varname>$i</varname>) makes it +impossible for the user to override the flag. This is intended +behavior. <varname>$i</varname> and <varname>$e</varname> can be used +with all other config keys in &kde; applications as well.</para></tip> + +<para>The following example outlines possible customizations:</para> + +<para> +<programlisting> +[CertificateCreationWizard] +;Disallow to copy personal data from the addressbook, do not allow local override +ShowSetWhoAmI[$i]=false + +;sets the user name to $USER +CN[$e]=$USER + +;sets the company name to "My Company", disallows editing +O[$i]=My Company + +;sets the department name to a value returned by a script +OU[$ei]=$(lookup_dept_from_ip) + +; sets country to DE, but allows for changes by the user +C=DE +</programlisting> + +</para> +</sect1> + + <sect1 id="admin-key-filters"> + + <title> + Creating and Editing Key Categories + </title> + + <para> + &kleopatra; allows the user to configure the <link + linkend="configuration-appearance">visual appearance</link> of + keys based on a concept called <guilabel>Key + Categories</guilabel>. This section describes how you can edit + the available categories and add new ones. + </para> + + <para> + When trying to find the category a key belongs to, &kleopatra; + tries to match the key to a sequence of key filters, + configured in the <filename>libkleopatrarc</filename>. The + first one to match defines the category. + </para> + + <para> + Each key filter is defined in a config group named + <literal>Key Filter #<replaceable>n</replaceable></literal>, + where <replaceable>n</replaceable> is a number, starting from + <literal>0</literal>. + </para> + + <para> + The only mandatory key in a <literal>Key Filter + #<replaceable>n</replaceable></literal> group is + <varname>Name</varname>, containing the name of the category + as displayed in the <link + linkend="configuration-appearance">config dialog</link>. + </para> + + <para> + <xref linkend="table-key-filters-appearance"/> lists all keys + that define the display properties of keys belonging to that + category (&ie; those keys that can be adjusted in the <link + linkend="configuration-appearance">config dialog</link>), + whereas <xref linkend="table-key-filters-criteria"/> lists all + keys that define the criteria the filter matches keys against. + </para> + + <table id="table-key-filters-appearance"> + <title>Key-Filter Configuration Keys Defining Display + Properties</title> + <tgroup cols="3"> + <colspec colnum="2" align="center"/> + <thead> + <row> + <entry>Config Key</entry> + <entry>Type</entry> + <entry>Description</entry> + </row> + </thead> + <!--tfoot/--> + <tbody> + <row> + <entry><varname>background-color</varname></entry> + <entry>color</entry> + <entry> + The background color to use. If missing, defaults to + whichever background color is defined globally for list + views. + </entry> + </row> + <row> + <entry><varname>foreground-color</varname></entry> + <entry>color</entry> + <entry> + The foreground color to use. If missing, defaults to + whichever foreground color is defined globally for list + views. + </entry> + </row> + <row> + <entry><varname>font</varname></entry> + <entry>font</entry> + <entry> + The custom font to use. The font will be scaled to the + size configured for list views, and any font + attributes (see below) will be applied. + </entry> + </row> + <row> + <entry><varname>font-bold</varname></entry> + <entry>boolean</entry> + <entry> + If set to <literal>true</literal> and + <varname>font</varname> is not set, uses the + default list view font with bold font style added (if + available). Ignored if <varname>font</varname> is also + present. + </entry> + </row> + <row> + <entry><varname>font-italic</varname></entry> + <entry>boolean</entry> + <entry> + Analogous to <varname>font-bold</varname>, but for + italic font style instead of bold. + </entry> + </row> + <row> + <entry><varname>font-strikeout</varname></entry> + <entry>boolean</entry> + <entry> + If <literal>true</literal>, draws a centered line over + the font. Applied even if + <varname>font</varname> is set. + </entry> + </row> + <row> + <entry><varname>icon</varname></entry> + <entry>text</entry> + <entry> + The name of an icon to show in the first column. Not yet + implemented. + </entry> + </row> + </tbody> + </tgroup> + </table> + + <table id="table-key-filters-criteria"> + <title>Key-Filter Configuration Keys Defining Filter Criteria</title> + <tgroup cols="3"> + <colspec colnum="2" align="center"/> + <thead> + <row> + <entry>Config Key</entry> + <entry>Type</entry> + <entry>If specified, filter matches when...</entry> + </row> + </thead> + <!--tfoot/--> + <tbody> + <row> + <entry><varname>is-revoked</varname></entry> + <entry>boolean</entry> + <entry>the key has been revoked.</entry> + </row> + <row> + <entry><varname>is-expired</varname></entry> + <entry>boolean</entry> + <entry>the key is expired.</entry> + </row> + <row> + <entry><varname>is-disabled</varname></entry> + <entry>boolean</entry> + <entry> + the key has been disabled (marked for not using) by + the user. Ignored for &smime; keys. + </entry> + </row> + <row> + <entry><varname>is-root-certificate</varname></entry> + <entry>boolean</entry> + <entry> + the key is a root certificate. Ignored for OpenPGP + keys. + </entry> + </row> + <row> + <entry><varname>can-encrypt</varname></entry> + <entry>boolean</entry> + <entry> + the key can be used for encryption. + </entry> + </row> + <row> + <entry><varname>can-sign</varname></entry> + <entry>boolean</entry> + <entry> + the key can be used for signing. + </entry> + </row> + <row> + <entry><varname>can-certify</varname></entry> + <entry>boolean</entry> + <entry> + the key can be used for signing (certifying) other + keys. + </entry> + </row> + <row> + <entry><varname>can-authenticate</varname></entry> + <entry>boolean</entry> + <entry> + the key can be used for authentication (⪚ as an + <acronym>TLS</acronym> client certificate). + </entry> + </row> + <row> + <entry><varname>has-secret-key</varname></entry> + <entry>boolean</entry> + <entry> + the secret key for this key pair is available. + </entry> + </row> + <row> + <entry><varname>is-openpgp-key</varname></entry> + <entry>boolean</entry> + <entry> + the key is an OpenPGP key (<literal>true</literal>), + or an &smime; key (<literal>false</literal>). + </entry> + </row> + <row> + <entry><varname>was-validated</varname></entry> + <entry>boolean</entry> + <entry> + the key has been validated (see <link + linkend="certificates-validate"><menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo></shortcut> + <guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice></link>). + </entry> + </row> + <row> + <entry><varname><replaceable>prefix</replaceable>-ownertrust</varname></entry> + <entry> + validity<footnote> + <para> + Validity is an (ordered) enumeration with the + following allowed values: + <literal>unknown</literal>, + <literal>undefined</literal>, + <literal>never</literal>, + <literal>marginal</literal>, + <literal>full</literal>, + <literal>ultimate</literal>. See the &gpg; and + &gpgsm; manuals for a detailed explanation. + </para> + </footnote> + </entry> + <entry> + the key has exactly + (<replaceable>prefix</replaceable> = <literal>is</literal>), + has anything but + (<replaceable>prefix</replaceable> = <literal>is-not</literal>), + has at least + (<replaceable>prefix</replaceable> = <literal>is-at-least</literal>), + or has at most + (<replaceable>prefix</replaceable> = <literal>is-at-most</literal>) + the ownertrust given as the value of the config key. If + more than one + <varname><replaceable>prefix</replaceable>-ownertrust</varname> + keys (with different + <replaceable>prefix</replaceable> values) are present in a + single group, the behavior is undefined. + </entry> + </row> + <row> + <entry><varname><replaceable>prefix</replaceable>-validity</varname></entry> + <entry>validity</entry> + <entry> + Analogous to + <varname><replaceable>prefix</replaceable>-ownertrust</varname>, + but for key validity instead of ownertrust. + </entry> + </row> + </tbody> + </tgroup> + </table> + + <note> + <para> + Some of the more interesting criteria, such as + <varname>is-revoked</varname> or + <varname>is-expired</varname> will only work on + <emphasis>validated</emphasis> keys, which is why, by + default, only validated keys are checked for revocation and + expiration, although you are free to remove these extra + checks. + </para> + </note> + + <para> + In general, criteria not specified (&ie; the config entry is + not set) are not checked for. If a criterion is given, it + is checked for and must match for the filter as a whole to + match, &ie; the criteria are AND'ed together. + </para> + + <example> + <title> + Examples of key filters + </title> + <para> + To check for all expired, but non-revoked root certificates, + you would use a key filter defined as follows: + </para> +<!-- isn't there a better way to not indent this in the output??? --> + <screen><!-- +-->[Key Filter #<replaceable>n</replaceable>] +Name=expired, but not revoked +was-validated=true +is-expired=true +is-revoked=false +is-root-certificate=true<!-- + --></screen> + <para> + To check for all disabled OpenPGP keys (not yet supported by &kleopatra;) + with ownertrust of at least + <quote>marginal</quote>, you would use: + </para> + <screen><!-- +-->[Key Filter #<replaceable>n</replaceable>] +Name=disabled OpenPGP keys with marginal or better ownertrust +is-openpgp=true +is-disabled=true +is-at-least-ownertrust=marginal<!-- + --></screen> + </example> + + </sect1> + + </chapter> <!-- Administrator's Guide --> + +<chapter id="credits-and-license"> +<title>Credits and License</title> + +<para>&kleopatra; copyright 2002 &Steffen.Hansen;, &Matthias.Kalle.Dalheimer; +and &Jesper.Pedersen;., copyright 2004 &Daniel.Molkentin;, copyright 2004 Klarälvdalens Datakonsult AB</para> + +<para>Documentation copyright 2002 &Steffen.Hansen;, copyright 2004 +&Daniel.Molkentin;, copyright 2004 Klarälvdalens Datakonsult AB</para> + +<itemizedlist> +<title>Contributors</title> +<listitem> +<para>&Marc.Mutz; &Marc.Mutz.mail;</para> +</listitem> +<listitem> +<para>&David.Faure; &David.Faure.mail;</para> +</listitem> +<listitem> +<para>&Steffen.Hansen; <email>hansen@kde.org</email></para> +</listitem> +<listitem> +<para>&Matthias.Kalle.Dalheimer; &Matthias.Kalle.Dalheimer.mail;</para> +</listitem> +<listitem> +<para>&Jesper.Pedersen; &Jesper.Pedersen.mail;</para> +</listitem> +<listitem> +<para>&Daniel.Molkentin; &Daniel.Molkentin.mail;</para> +</listitem> +</itemizedlist> + +<!-- TRANS:CREDIT_FOR_TRANSLATORS --> +&underFDL; +&underGPL; +</chapter> + +&documentation.index; +</book> + +<!-- +Local Variables: +mode: sgml +sgml-minimize-attributes:nil +sgml-general-insert-case:lower +sgml-indent-step:0 +sgml-indent-data:nil +End: + +// vim:ts=2:sw=2:tw=78:noet +--> |