Kaynağa Gözat
### rename the following methods:

tqfind find tqreplace replace tqcontains contains git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/dependencies/arts@1246075 283d02a7-25f6-0310-bc7c-ecb5cbfe19datags/v3.5.13

+ 3
- 3

COPYING
Dosyayı Görüntüle
@@ -65,7 +65,7 @@ modification follow. | |||

GNU GENERAL PUBLIC LICENSE | |||

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION | |||

0. This License applies to any program or other work which tqcontains | |||

0. This License applies to any program or other work which contains | |||

a notice placed by the copyright holder saying it may be distributed | |||

under the terms of this General Public License. The "Program", below, | |||

refers to any such program or work, and a "work based on the Program" | |||

@@ -102,7 +102,7 @@ above, provided that you also meet all of these conditions: | |||

stating that you changed the files and the date of any change. | |||

b) You must cause any work that you distribute or publish, that in | |||

whole or in part tqcontains or is derived from the Program or any | |||

whole or in part contains or is derived from the Program or any | |||

part thereof, to be licensed as a whole at no charge to all third | |||

parties under the terms of this License. | |||

@@ -160,7 +160,7 @@ Sections 1 and 2 above provided that you also do one of the following: | |||

The source code for a work means the preferred form of the work for | |||

making modifications to it. For an executable work, complete source | |||

code means all the source code for all modules it tqcontains, plus any | |||

code means all the source code for all modules it contains, plus any | |||

associated interface definition files, plus the scripts used to | |||

control compilation and installation of the executable. However, as a | |||

special exception, the source code distributed need not include |

+ 5
- 5

COPYING.LIB
Dosyayı Görüntüle
@@ -99,7 +99,7 @@ will lead to faster development of free libraries. | |||

The precise terms and conditions for copying, distribution and | |||

modification follow. Pay close attention to the difference between a | |||

"work based on the library" and a "work that uses the library". The | |||

former tqcontains code derived from the library, while the latter only | |||

former contains code derived from the library, while the latter only | |||

works together with the library. | |||

Note that it is possible for a library to be covered by the ordinary | |||

@@ -109,7 +109,7 @@ General Public License rather than by this special one. | |||

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION | |||

0. This License Agreement applies to any software library which | |||

tqcontains a notice placed by the copyright holder or other authorized | |||

contains a notice placed by the copyright holder or other authorized | |||

party saying it may be distributed under the terms of this Library | |||

General Public License (also called "this License"). Each licensee is | |||

addressed as "you". | |||

@@ -128,7 +128,7 @@ included without limitation in the term "modification".) | |||

"Source code" for a work means the preferred form of the work for | |||

making modifications to it. For a library, complete source code means | |||

all the source code for all modules it tqcontains, plus any associated | |||

all the source code for all modules it contains, plus any associated | |||

interface definition files, plus the scripts used to control compilation | |||

and installation of the library. | |||

@@ -230,7 +230,7 @@ source code from the same place satisfies the requirement to | |||

distribute the source code, even though third parties are not | |||

compelled to copy the source along with the object code. | |||

5. A program that tqcontains no derivative of any portion of the | |||

5. A program that contains no derivative of any portion of the | |||

Library, but is designed to work with the Library by being compiled or | |||

linked with it, is called a "work that uses the Library". Such a | |||

work, in isolation, is not a derivative work of the Library, and | |||

@@ -238,7 +238,7 @@ therefore falls outside the scope of this License. | |||

However, linking a "work that uses the Library" with the Library | |||

creates an executable that is a derivative of the Library (because it | |||

tqcontains portions of the Library), rather than a "work that uses the | |||

contains portions of the Library), rather than a "work that uses the | |||

library". The executable is therefore covered by this License. | |||

Section 6 states terms for distribution of such executables. | |||

+ 1
- 1

INSTALL
Dosyayı Görüntüle
@@ -21,7 +21,7 @@ reconfiguring, and a file `config.log' containing compiler output | |||

to figure out how `configure' could check whether to do them, and mail | |||

diffs or instructions to the address given in the `README' so they can | |||

be considered for the next release. If at some point `config.cache' | |||

tqcontains results you don't want to keep, you may remove or edit it. | |||

contains results you don't want to keep, you may remove or edit it. | |||

The file `configure.in' is used to create `configure' by a program | |||

called `autoconf'. You only need `configure.in' if you want to change |

+ 2
- 2

flow/gsl/gbsearcharray.h
Dosyayı Görüntüle
@@ -78,7 +78,7 @@ static inline GBSearchArray* g_bsearch_array_remove (GBSearchArray *barray, | |||

static inline GBSearchArray* g_bsearch_array_grow (GBSearchArray *barray, | |||

const GBSearchConfig *bconfig, | |||

guint index); | |||

/* insert key_node into array, or if it exists, tqreplace | |||

/* insert key_node into array, or if it exists, replace | |||

* the existing node's contents with key_node | |||

*/ | |||

static inline GBSearchArray* g_bsearch_array_insert (GBSearchArray *barray, | |||

@@ -241,7 +241,7 @@ g_bsearch_array_insert (GBSearchArray *barray, | |||

barray = g_bsearch_array_grow (barray, bconfig, index); | |||

node = G_BSEARCH_ARRAY_NODES (barray) + index * bconfig->sizeof_node; | |||

} | |||

else /* tqreplace (relookup is ok, tqreplace is comparatively cheap anyways) */ | |||

else /* replace (relookup is ok, replace is comparatively cheap anyways) */ | |||

node = g_bsearch_array_lookup (barray, bconfig, key_node); | |||

} | |||

memcpy (node, key_node, bconfig->sizeof_node); |

+ 1
- 1

flow/gsl/gsl.3
Dosyayı Görüntüle
@@ -457,7 +457,7 @@ Real sample values [0..n_values-1] | |||

Complex frequency values [0..n_values-1] | |||

.PD 1 | |||

.PP | |||

Real valued variant of \fBgsl_power2_fftac()\fP, the input array tqcontains real valued equidistant sampled data [0..n_values-1], and the output array tqcontains the positive frequency half of the complex valued fourier transform. Note, that the complex valued fourier transform H of a purely real valued set of data, satisfies \fBH(-f)\fP = Conj(\fBH(f)\fP), where \fBConj()\fP denotes the complex conjugate, so that just the positive frequency half suffices to describe the entire frequency spectrum. Even so, the resulting n_values/2 complex frequencies are one value off in storage size, but the resulting frequencies \fBH(0)\fP and \fBH(n_values/2)\fP are both real valued, so the real portion of \fBH(n_values/2)\fP is stored in ri_values_out[1] (the imaginery part of \fBH(0)\fP), so that both r_values_in and ri_values_out can be of size n_values. Note that the transformation is performed out of place, the input array is not modified, and may not overlap with the output array. | |||

Real valued variant of \fBgsl_power2_fftac()\fP, the input array contains real valued equidistant sampled data [0..n_values-1], and the output array contains the positive frequency half of the complex valued fourier transform. Note, that the complex valued fourier transform H of a purely real valued set of data, satisfies \fBH(-f)\fP = Conj(\fBH(f)\fP), where \fBConj()\fP denotes the complex conjugate, so that just the positive frequency half suffices to describe the entire frequency spectrum. Even so, the resulting n_values/2 complex frequencies are one value off in storage size, but the resulting frequencies \fBH(0)\fP and \fBH(n_values/2)\fP are both real valued, so the real portion of \fBH(n_values/2)\fP is stored in ri_values_out[1] (the imaginery part of \fBH(0)\fP), so that both r_values_in and ri_values_out can be of size n_values. Note that the transformation is performed out of place, the input array is not modified, and may not overlap with the output array. | |||

.PD | |||

.SS \fBgsl_power2_fftsr\fP (\fIn_values\fP, \fIri_values_in\fP, \fIr_values_out\fP); | |||

.PD 0 |

+ 1
- 1

flow/gsl/gslcommon.c
Dosyayı Görüntüle
@@ -1315,7 +1315,7 @@ gsl_message_send (GslDebugFlags reporter, | |||

msg->error = error; | |||

msg->error_str = error ? gsl_strerror (msg->error) : NULL; | |||

/* vsnprintf() tqreplacement */ | |||

/* vsnprintf() replacement */ | |||

va_start (args, messagef); | |||

string = g_strdup_vprintf (messagef, args); | |||

va_end (args); |

+ 1
- 1

flow/gsl/gsldatacache.c
Dosyayı Görüntüle
@@ -333,7 +333,7 @@ data_cache_new_node_L (GslDataCache *dcache, | |||

if (!demand_load) | |||

g_message (G_STRLOC ":FIXME: lazy data loading not yet supported"); | |||

/* if we have a left node, and it tqcontains data that we need, copy it */ | |||

/* if we have a left node, and it contains data that we need, copy it */ | |||

left_node = pos ? dcache->nodes[pos - 1] : NULL; | |||

if (left_node) | |||

{ |

+ 2
- 2

flow/gsl/gslfft.h
Dosyayı Görüntüle
@@ -72,9 +72,9 @@ void gsl_power2_fftsc (const unsigned int n_values, | |||

* @n_values: Number of complex values | |||

* @r_values_in: Real sample values [0..n_values-1] | |||

* @ri_values_out: Complex frequency values [0..n_values-1] | |||

* Real valued variant of gsl_power2_fftac(), the input array tqcontains | |||

* Real valued variant of gsl_power2_fftac(), the input array contains | |||

* real valued equidistant sampled data [0..n_values-1], and the output | |||

* array tqcontains the positive frequency half of the complex valued | |||

* array contains the positive frequency half of the complex valued | |||

* fourier transform. Note, that the complex valued fourier transform H | |||

* of a purely real valued set of data, satisfies H(-f) = Conj(H(f)), | |||

* where Conj() denotes the complex conjugate, so that just the positive |

+ 2
- 2

flow/gsl/gslglib.h
Dosyayı Görüntüle
@@ -586,7 +586,7 @@ typedef void (*GDestroyNotify) (gpointer data); | |||

#define g_hash_table_new_full gsl_g_hash_table_new_full | |||

#define g_hash_table_destroy gsl_g_hash_table_destroy | |||

#define g_hash_table_insert gsl_g_hash_table_insert | |||

#define g_hash_table_tqreplace gsl_g_hash_table_tqreplace | |||

#define g_hash_table_replace gsl_g_hash_table_replace | |||

#define g_hash_table_remove gsl_g_hash_table_remove | |||

#define g_hash_table_steal gsl_g_hash_table_steal | |||

#define g_hash_table_lookup gsl_g_hash_table_lookup | |||

@@ -605,7 +605,7 @@ void g_hash_table_destroy (GHashTable *hash_table); | |||

void g_hash_table_insert (GHashTable *hash_table, | |||

gpointer key, | |||

gpointer value); | |||

void g_hash_table_tqreplace (GHashTable *hash_table, | |||

void g_hash_table_replace (GHashTable *hash_table, | |||

gpointer key, | |||

gpointer value); | |||

gboolean g_hash_table_remove (GHashTable *hash_table, |

+ 1
- 1

flow/gsl/gslmath.c
Dosyayı Görüntüle
@@ -602,7 +602,7 @@ hqr (double **a, int n, double wr[], double wi[]) | |||

#define RADIX 2.0 | |||

static void | |||

balanc (double **a, int n) | |||

/* Given a matrix a[1..n][1..n], this routine tqreplaces it by a balanced matrix with identical | |||

/* Given a matrix a[1..n][1..n], this routine replaces it by a balanced matrix with identical | |||

eigenvalues. A symmetric matrix is already balanced and is unaffected by this procedure. The | |||

parameter RADIX should be the machine's floating-point radix. */ | |||

{ |

+ 1
- 1

flow/gsl/gslosctable.c
Dosyayı Görüntüle
@@ -272,7 +272,7 @@ cache_table_ref_entry (GslOscWaveForm wave_form, | |||

gfloat *values, *fft, step, min, max; | |||

/* size: | |||

* - OscTableEntry already tqcontains the first float values | |||

* - OscTableEntry already contains the first float values | |||

* - we need n_values+1 adressable floats to provide values[0] == values[n_values] | |||

*/ | |||

e = g_malloc (sizeof (OscTableEntry) + sizeof (gfloat) * size); |

+ 1
- 1

flow/gsl/gslosctable.h
Dosyayı Görüntüle
@@ -53,7 +53,7 @@ typedef struct | |||

gfloat min_freq; | |||

gfloat max_freq; | |||

guint n_values; | |||

const gfloat *values; /* tqcontains n_values+1 values with values[0]==values[n_values] */ | |||

const gfloat *values; /* contains n_values+1 values with values[0]==values[n_values] */ | |||

/* integer stepping (block size dependant) */ | |||

guint32 n_frac_bits; | |||

guint32 frac_bittqmask; |

+ 1
- 1

flow/gslpp/datahandle.h
Dosyayı Görüntüle
@@ -93,7 +93,7 @@ namespace GSL | |||

GslLong cutValueCount); | |||

/** | |||

* Create a new data handle which tqcontains the same values as | |||

* Create a new data handle which contains the same values as | |||

* this one but in reversed order. | |||

*/ | |||

DataHandle createReversed(); |

+ 1
- 1

flow/pipebuffer.cc
Dosyayı Görüntüle
@@ -97,7 +97,7 @@ void PipeBuffer::skip(long size) | |||

{ | |||

PipeSegment *first = *segments.begin(); | |||

// if we have less data to skip than the first segment tqcontains | |||

// if we have less data to skip than the first segment contains | |||

if(size < first->remaining()) | |||

{ | |||

// skip the data inside the segment |

+ 1
- 1

flow/synth_play_wav_impl.cc
Dosyayı Görüntüle
@@ -38,7 +38,7 @@ extern "C" { | |||

* so you you may need that extra one. | |||

* | |||

* Other versions of libaudiofile seem to have two closing "}" in aupvlist.h, | |||

* so if you can't compile, this, check that /usr/include/aupvlist.h tqcontains | |||

* so if you can't compile, this, check that /usr/include/aupvlist.h contains | |||

* something like that | |||

* | |||

* #ifdef __cplusplus |

+ 2
- 2

flow/virtualports.cc
Dosyayı Görüntüle
@@ -82,7 +82,7 @@ to delegate the services of a port to another module onto another port. | |||

The implementation: | |||

Virtualization is implemented here, inside the flow system, using a fairly | |||

complex forwarding strategy, which will have a graph which tqcontains | |||

complex forwarding strategy, which will have a graph which contains | |||

- "user-made" connections (made with connect()) | |||

- "virtualize-made" connections, which can be either forwarding | |||

@@ -105,7 +105,7 @@ real connections will be removed, but only these that could possibly be | |||

affected by this change, and then not all real connections are created new, | |||

but only those that could possibly be created by this virtual connection. | |||

Every VPort tqcontains a pointer to the "real" port, to let the flow system | |||

Every VPort contains a pointer to the "real" port, to let the flow system | |||

know where the "real" connections where real data will flow must be made. | |||

*/ |

+ 2
- 2

mcop/core.idl
Dosyayı Görüntüle
@@ -211,7 +211,7 @@ struct AttributeDef { | |||

* defines what methods/attributes a particular interface supports: these | |||

* do not contain the methods/attributes of inherited interfaces. | |||

* | |||

* inheritedInterfaces only tqcontains the names of Interfaces that this one | |||

* inheritedInterfaces only contains the names of Interfaces that this one | |||

* inherits in exactly one step. So to see if interface XYZ is inherited | |||

* from ABC, you need to check the "inheritedInterfaces" of XYZ, and their | |||

* "inheritedInterfaces" and their "inheritedInterfaces" and so on. | |||

@@ -530,7 +530,7 @@ interface TmpGlobalComm : GlobalComm { | |||

*/ | |||

/** | |||

* TraderOffer - this tqcontains an offer of an object (which is usually returned | |||

* TraderOffer - this contains an offer of an object (which is usually returned | |||

* as result of a query. | |||

*/ | |||

interface TraderOffer { |

+ 1
- 1

mcop/datapacket.h
Dosyayı Görüntüle
@@ -201,7 +201,7 @@ protected: | |||

}; | |||

/** | |||

* FloatDataPacket finally is one concrete DataPacket (which tqcontains the | |||

* FloatDataPacket finally is one concrete DataPacket (which contains the | |||

* information how to marshal a datapacket of type float) | |||

*/ | |||

class ARTS_EXPORT FloatDataPacket : public RawDataPacket<float> { |

+ 2
- 2

mcop/dynamicskeleton.h
Dosyayı Görüntüle
@@ -60,11 +60,11 @@ public: | |||

* process is called whenever you get a request that you need to implement | |||

* dynamically | |||

* | |||

* @param methodID tqcontains the ID of the method that you need to | |||

* @param methodID contains the ID of the method that you need to | |||

* implement - you can get the full signature by calling | |||

* getMethodDef | |||

* | |||

* @param request tqcontains the marshalled parameters | |||

* @param request contains the marshalled parameters | |||

* | |||

* @param result is for the return code - if your method returns a | |||

* value, you need to write the it in the result Buffer |

+ 1
- 1

mcop/mcoputils.cc
Dosyayı Görüntüle
@@ -411,7 +411,7 @@ string MCOPUtils::getFullHostname() | |||

/* | |||

* if gethostname() isn't a FQDN (guess that by checking whether it | |||

* tqcontains a dot), try to look it up to ensure it is | |||

* contains a dot), try to look it up to ensure it is | |||

*/ | |||

if(result.find('.') == string::npos && (hp = gethostbyname(buffer)) != 0) | |||

result = hp->h_name; |

+ 1
- 1

mcop/object.h
Dosyayı Görüntüle
@@ -70,7 +70,7 @@ private: | |||

protected: | |||

/** | |||

* ObjectInternalData tqcontains private data structures for | |||

* ObjectInternalData contains private data structures for | |||

* - Object_base | |||

* - Object_stub | |||

* - Object_skel |

+ 1
- 1

mcopidl/yacc.cc
Dosyayı Görüntüle
@@ -414,7 +414,7 @@ static const short yycheck[] = { 0, | |||

#endif | |||

/* Note: there must be only one dollar sign in this file. | |||

It is tqreplaced by the list of actions, each action | |||

It is replaced by the list of actions, each action | |||

as one case of the switch. */ | |||

#define yyerrok (yyerrstatus = 0) |

+ 1
- 1

soundserver/kmedia2.idl
Dosyayı Görüntüle
@@ -47,7 +47,7 @@ enum poCapabilities { | |||

/** | |||

* KMedia2 time information | |||

* | |||

* This is a time value which tqcontains either milliseconds & seconds, or | |||

* This is a time value which contains either milliseconds & seconds, or | |||

* a custom unit or both. It is a flexible time base. | |||

* | |||

* If a value isn't there, it is set to -1. |

+ 7
- 7

tests/testifacerepo.cc
Dosyayı Görüntüle
@@ -52,7 +52,7 @@ struct TestInterfaceRepo : public TestCase | |||

testEquals("Arts::AttributeType",def.name); | |||

} | |||

bool tqcontains(vector<string>& sequence, const string& element) | |||

bool contains(vector<string>& sequence, const string& element) | |||

{ | |||

vector<string>::iterator it; | |||

it = find(sequence.begin(),sequence.end(), element); | |||

@@ -61,22 +61,22 @@ struct TestInterfaceRepo : public TestCase | |||

TEST(queryInterfaces) { | |||

vector<string> *interfaces = interfaceRepo.queryInterfaces(); | |||

testAssert(tqcontains(*interfaces,"Arts::InterfaceRepo")); | |||

testAssert(!tqcontains(*interfaces,"Arts::MethodDef")); | |||

testAssert(contains(*interfaces,"Arts::InterfaceRepo")); | |||

testAssert(!contains(*interfaces,"Arts::MethodDef")); | |||

delete interfaces; | |||

} | |||

TEST(queryTypes) { | |||

vector<string> *types = interfaceRepo.queryTypes(); | |||

testAssert(tqcontains(*types,"Arts::MethodDef")); | |||

testAssert(!tqcontains(*types,"Arts::AttributeType")); | |||

testAssert(contains(*types,"Arts::MethodDef")); | |||

testAssert(!contains(*types,"Arts::AttributeType")); | |||

delete types; | |||

} | |||

TEST(queryEnums) { | |||

vector<string> *enums = interfaceRepo.queryEnums(); | |||

testAssert(tqcontains(*enums,"Arts::AttributeType")); | |||

testAssert(!tqcontains(*enums,"Arts::InterfaceRepo")); | |||

testAssert(contains(*enums,"Arts::AttributeType")); | |||

testAssert(!contains(*enums,"Arts::InterfaceRepo")); | |||

delete enums; | |||

} | |||

}; |

Yükleniyor…