Remove unnecessary backup translations.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>
(cherry picked from commit 6bcea37ca2)

.gitmodules

@@ -1,6 +0,0 @@
-[submodule "admin"]
-	path = admin
-	url = http://system@scm.trinitydesktop.org/scm/git/tde-common-admin
-[submodule "cmake"]
-	path = cmake
-	url = http://system@scm.trinitydesktop.org/scm/git/tde-common-cmake

Building-with-cmake.txt

@@ -1,51 +0,0 @@
-CMake 2.4.4 (or later) is required to build Kile.
-
-Building Kile
-=============
-
-1. Get the Kile directory from trunk (there is no need to get the whole office 
-module anymore).
-
-2. Create a "kile-build" directory somewhere for an out-of-source build.
-
-3. Enter the "kile-build" directory and call cmake with:
-
-       cmake <path to the kile directory> -DCMAKE_INSTALL_PREFIX=$HOME/.trinity
-
-   to install Kile later on in the current user's home directory.
-
-4. In the "kile-build" directory, issue "make" to start the build process.
-   Issuing "make install" will start the installation process, for which the DESTDIR
-   option can be used to specify the base directory of the installed files.
-
-
-Building Documentation
-======================
-
-The documentation will automatically be built provided that the documentation files
-are located in the following directories:
-<kile-root>
-           /doc                                   for the standard documentation and
-                                                  accompanying image files
-
-           /translations
-                        /<language>
-                                   /doc           for the translated documentation and
-                                                  images in language <language>
-
-                                   /messages      for the translated message catalogs
-                                                  in language <language>
-
-Please note that every docbook must be called "index.docbook" and that only PNG image
-files can be used. Furthermore, message catalogs must be called "kile.po".
-
-When the "doc" and "translations" directories are found, the build targets "docbooks"
-and "translations" will be generated for the compiling of the documentation.
-
-
-Special Flags
-=============
-
-The flag "KILE_VERSION" can be set in the CMake cache to specify the installation
-directory of basic documentation files (README, AUTHORS, ChangeLog,...), i.e. they
-will be installed in "share/doc/kile-${KILE_VERSION}/" instead of "share/doc/kile/".

CMakeL10n.txt

@@ -0,0 +1,22 @@
+#################################################
+#
+#  (C) 2018 Slávek Banko
+#  slavek.banko (AT) axis.cz
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+cmake_minimum_required( VERSION 3.1 )
+
+
+##### include our cmake modules #################
+
+include( TDEL10n )
+
+
+##### create translation templates ##############
+
+tde_l10n_auto_add_subdirectories( )

CMakeLists.txt

@@ -0,0 +1,86 @@
+############################################
+#                                          #
+#  Improvements and feedbacks are welcome  #
+#                                          #
+#  This file is released under GPL >= 3    #
+#                                          #
+############################################
+
+
+cmake_minimum_required( VERSION 3.1 )
+
+
+#### general package setup
+
+project( kile )
+
+
+#### include essential cmake modules
+
+include( FindPerl               )
+include( FindPkgConfig          )
+include( CheckFunctionExists    )
+include( CheckSymbolExists      )
+include( CheckIncludeFile       )
+include( CheckLibraryExists     )
+include( CheckCSourceCompiles   )
+include( CheckCXXSourceCompiles )
+
+
+#### include our cmake modules
+
+include( TDEMacros )
+
+
+##### set version number ########################
+
+tde_set_project_version( )
+
+
+##### setup install paths
+
+include( TDESetupPaths )
+tde_setup_paths( )
+
+
+##### optional stuff
+
+option( WITH_ALL_OPTIONS "Enable all optional support" OFF                                          )
+option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
+
+
+##### user requested modules
+
+option( BUILD_ALL "Build all" ON                             )
+option( BUILD_DOC "Build documentation" ${BUILD_ALL}         )
+option( BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL} )
+
+
+##### configure checks
+
+include( ConfigureChecks.cmake )
+
+
+###### global compiler settings
+
+add_definitions( -DHAVE_CONFIG_H )
+
+set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TQT_CXX_FLAGS}" )
+set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--no-undefined" )
+set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined" )
+
+
+##### directories
+
+add_subdirectory( src )
+
+
+##### other data ################################
+
+tde_conditional_add_project_docs( BUILD_DOC )
+tde_conditional_add_project_translations( BUILD_TRANSLATIONS )
+
+
+##### write configure files
+
+configure_file( config.h.cmake config.h @ONLY )

ConfigureChecks.cmake

@@ -0,0 +1,27 @@
+###########################################
+#                                         #
+#  Improvements and feedback are welcome  #
+#                                         #
+#  This file is released under GPL >= 3   #
+#                                         #
+###########################################
+
+
+# required stuff
+
+tde_setup_architecture_flags( )
+
+include(TestBigEndian)
+test_big_endian(WORDS_BIGENDIAN)
+
+tde_setup_largefiles( )
+
+find_package( TQt )
+find_package( TDE )
+
+
+##### check for gcc visibility support #########
+
+if( WITH_GCC_VISIBILITY )
+  tde_setup_gcc_visibility( )
+endif( )

INSTALL

@@ -0,0 +1,42 @@
+Basic Installation
+==================
+
+kile relies on cmake to build.
+
+Here are suggested default options:
+
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
+ -DCMAKE_SKIP_RPATH="OFF" \
+ -DBUILD_ALL="ON" \
+ -DWITH_ALL_OPTIONS="ON"
+
+
+Requirements for use:
+=====================
+
+Basic:
+
+- TeTeX 2.0/3.0 or TeXLive (Including "AMS"-Packages and the documentation)
+- KDVI
+
+Advanced:
+
+- KPDF, KGhostView (Viewing PS and PDF)
+- Acroread (Viewing PDF)
+- Imagemagick, DVIPNG 1.7 (Bottom bar preview)
+
+By default there are also tools for the following programs defined:
+
+- Tar/zip/gzip/bzip2 (Archive)
+- DBlatex (Docbook to LaTeX)
+- Metapost and Asymptote
+- Latex2html (LaTeX to Web)
+- Tex4ht (LaTeX to Web)
+- Lilypond (Music Typesetting)
+- Konqueror/Mozilla/Firefox (Viewing HTML)
+- Kbibtex, KBib, JabRef, pybliographer, gbib (View Bibtex files)

INSTALL.MacOSX

@@ -1,7 +1,7 @@
 In order to install Kile on MacOS X, you need the following things:
 - a working X11 installation
 - a working LaTeX distribution
-- the KDE libraries
+- the TDE libraries
 - and Kile itself, of course
 
 Once everything is in place, Kile needs X11 to run, so make sure you launch X11 before Kile.

Makefile.am

@@ -1,5 +0,0 @@
-AUTOMAKE_OPTIONS = foreign 1.5
-
-include admin/deps.am
-include admin/Doxyfile.am
-SUBDIRS=$(TOPSUBDIRS)

Makefile.am.in

@@ -1,4 +0,0 @@
-AUTOMAKE_OPTIONS = foreign 1.5
-
-include admin/deps.am
-include admin/Doxyfile.am

README

@@ -1,54 +0,0 @@
-Dear User/Packager,
-
-this Readme is targeted towards people who want to build Kile from source or plan to create binary packages.
-If you have created a package, please drop us a note ( kile-devel@lists.sourceforge.net ) so that we can promote your package.
-All specified versions are minimum versions except for KDE and QT.
-
-1.) Checking dependencies
-
-- tdelibs 3.2 - 3.5 and according QT development packages
-- autoconf 2.53, automake and make (alternatively cmake 2.4.4, see also Building-with-cmake.txt)
-- gcc 3.x/4.x
-
-2.) Building Kile from source
-
-- Extract the source code with `tar xjf kile-2.0.x.tar.bz2`
-- `cd kile-2.0.x`
-- ./configure --prefix=path_to_KDE3 (/usr or /opt/trinity generally) --with-qt-dir=path_to_QT3 library (/usr/lib/qt3 generally)
-	-- If you don't know what the path to KDE3 on your system is, you can use output of `tde-config --prefix`.
-	-- Or you can choose `--prefix=$HOME/.trinity` to not mess up with your distribution's package management system.
-- Type `make` to compile the package.
-- Type `make install` to install the programs, data files and documentation.
-- Type `kile` and enjoy the power of LaTeX together with the joy of using Kile :)
-
-3.) Using Kile
-
-To use Kile you (obviously) need some external programs.
-The following list is divided into basic, advanced and additional usage.
-
-Basic:
-
-- TeTeX 2.0/3.0 or TeXLive 2005/2007 (Including "AMS"-Packages and the documentation)
-- KDVI
-
-Advanced:
-
-- KPDF, KGhostView (Viewing PS and PDF)
-- Acroread (Viewing PDF)
-- Imagemagick, DVIPNG 1.7 (Bottom bar preview)
-
-By default there are also tools for the following programs defined:
-
-- Tar/zip/gzip/bzip2 (Archive)
-- DBlatex (Docbook to LaTeX)
-- Metapost and Asymptote
-- Latex2html (LaTeX to Web)
-- Tex4ht (LaTeX to Web)
-- Lilypond (Music Typesetting)
-- Konqueror/Mozilla/Firefox (Viewing HTML)
-- Kbibtex, KBib, JabRef, pybliographer, gbib (View Bibtex files)
-
-If you have any questions or corrections, please don't hesitate to contact us via kile-devel@lists.sourceforge.net.
-
-The Kile dev team
-

README.md

@@ -0,0 +1,39 @@
+
+Kile - a user-friendly LaTeX source editor and TeX shell for TDE
+
+
+The source editor is a multi-document editor designed for .tex and .bib
+files. Menus, wizards and auto-completion are provided to assist with
+tag insertion and code generation. A structural view of the document
+assists with navigation within source files.
+
+The TeX shell integrates the various tools required for TeX processing.
+It assists with LaTeX compilation, DVI and postscript document viewing,
+generation of bibliographies and indices and other common tasks.
+
+Kile can support large projects consisting of several smaller files.
+
+.
+
+Contributing
+--------------
+
+If you wish to contribute to kile, you might do so:
+
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
+
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate
+
+
+Translations status
+---------------------
+
+### messages
+[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/kile/multi-auto.svg
+"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/kile/)
+
+### desktop files
+[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/kile-desktop-files/multi-auto.svg
+"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/kile-desktop-files/)

aclocal.m4

@@ -1,910 +0,0 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.61],,
-[m4_warning([this file was generated for autoconf 2.61.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 13
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([acinclude.m4])

admin

@@ -1 +0,0 @@
-Subproject commit 04db460623e1f235e7239f08fdcc2d0ef72636af

cmake

@@ -1 +0,0 @@
-Subproject commit 1994b808819fd74446cb8f1a0491b3e10244f463

config.h.cmake

@@ -0,0 +1,8 @@
+#define VERSION "@VERSION@"
+
+// Defined if you have fvisibility and fvisibility-inlines-hidden support.
+#cmakedefine __KDE_HAVE_GCC_VISIBILITY 1
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#cmakedefine WORDS_BIGENDIAN @WORDS_BIGENDIAN@

config.h.in

@@ -1,240 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
-#undef HAVE_CARBON_CARBON_H
-
-/* Define if you have the CoreAudio API */
-#undef HAVE_COREAUDIO
-
-/* Define to 1 if you have the <crt_externs.h> header file. */
-#undef HAVE_CRT_EXTERNS_H
-
-/* Defines if your system has the crypt function */
-#undef HAVE_CRYPT
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define if you have libjpeg */
-#undef HAVE_LIBJPEG
-
-/* Define if you have libpng */
-#undef HAVE_LIBPNG
-
-/* Define if you have a working libpthread (will enable threaded code) */
-#undef HAVE_LIBPTHREAD
-
-/* Define if you have libz */
-#undef HAVE_LIBZ
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if your system needs _NSGetEnviron to set up the environment */
-#undef HAVE_NSGETENVIRON
-
-/* Define if you have res_init */
-#undef HAVE_RES_INIT
-
-/* Define if you have the res_init prototype */
-#undef HAVE_RES_INIT_PROTO
-
-/* Define if you have a STL implementation by SGI */
-#undef HAVE_SGI_STL
-
-/* Define to 1 if you have the `snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define if you have strlcat */
-#undef HAVE_STRLCAT
-
-/* Define if you have the strlcat prototype */
-#undef HAVE_STRLCAT_PROTO
-
-/* Define if you have strlcpy */
-#undef HAVE_STRLCPY
-
-/* Define if you have the strlcpy prototype */
-#undef HAVE_STRLCPY_PROTO
-
-/* Define to 1 if you have the <sys/bitypes.h> header file. */
-#undef HAVE_SYS_BITYPES_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Suffix for lib directories */
-#undef KDELIBSUFF
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* The size of `char *', as computed by sizeof. */
-#undef SIZEOF_CHAR_P
-
-/* The size of `int', as computed by sizeof. */
-#undef SIZEOF_INT
-
-/* The size of `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* The size of `short', as computed by sizeof. */
-#undef SIZEOF_SHORT
-
-/* The size of `size_t', as computed by sizeof. */
-#undef SIZEOF_SIZE_T
-
-/* The size of `unsigned long', as computed by sizeof. */
-#undef SIZEOF_UNSIGNED_LONG
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* If we use arts volume */
-#undef USE_ARTS
-
-/* Version number of package */
-#undef VERSION
-
-/* Defined if compiling without arts */
-#undef WITHOUT_ARTS
-
-/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-
-
-
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-
-
-
-#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
-# include <sys/time.h>
-# include <crt_externs.h>
-# define environ (*_NSGetEnviron())
-#endif
-
-
-
-#if !defined(HAVE_RES_INIT_PROTO)
-#ifdef __cplusplus
-extern "C" {
-#endif
-int res_init(void);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-
-
-#if !defined(HAVE_STRLCAT_PROTO)
-#ifdef __cplusplus
-extern "C" {
-#endif
-unsigned long strlcat(char*, const char*, unsigned long);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-
-
-#if !defined(HAVE_STRLCPY_PROTO)
-#ifdef __cplusplus
-extern "C" {
-#endif
-unsigned long strlcpy(char*, const char*, unsigned long);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-
-
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-
-
-
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-
-
-/* type to use in place of socklen_t if not defined */
-#undef kde_socklen_t
-
-/* type to use in place of socklen_t if not defined (deprecated, use
-   kde_socklen_t) */
-#undef ksize_t

configure.files

@@ -1,3 +0,0 @@
-./admin/configure.in.min
-configure.in.in
-configure.in.bot

configure.in

@@ -1,256 +0,0 @@
-dnl =======================================================
-dnl FILE: ./admin/configure.in.min
-dnl =======================================================
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl    Boston, MA 02110-1301, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(kile-2.0.3, "3.5.10") dnl searches for some needed programs
-
-AM_MAINTAINER_MODE
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_QT(3.2)
-AC_PATH_KDE
-dnl =======================================================
-dnl FILE: configure.in.in
-dnl =======================================================
-
-#MIN_CONFIG(3.2)
-CXXFLAGS="$CXXFLAGS $KDE_DEFAULT_CXXFLAGS"
-
-if test "$build_arts" = "yes"; then
-    AC_DEFINE(USE_ARTS, 1, [If we use arts volume])
-    LIB_ARTS="-lartskde"
-    AC_SUBST(LIB_ARTS)
-fi
-
-KDE_INIT_DOXYGEN([The API Reference], [Version $VERSION])
-
-KDE_CREATE_SUBDIRSLIST
-AM_CONDITIONAL(doc_SUBDIR_included, test "x$doc_SUBDIR_included" = xyes)
-AM_CONDITIONAL(src_SUBDIR_included, test "x$src_SUBDIR_included" = xyes)
-AM_CONDITIONAL(translations_SUBDIR_included, test "x$translations_SUBDIR_included" = xyes)
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ doc/Makefile ])
-AC_CONFIG_FILES([ src/Makefile ])
-AC_CONFIG_FILES([ src/kile/Makefile ])
-AC_CONFIG_FILES([ src/kile/complete/Makefile ])
-AC_CONFIG_FILES([ src/kile/complete/abbreviation/Makefile ])
-AC_CONFIG_FILES([ src/kile/complete/dictionary/Makefile ])
-AC_CONFIG_FILES([ src/kile/complete/tex/Makefile ])
-AC_CONFIG_FILES([ src/kile/encodings/Makefile ])
-AC_CONFIG_FILES([ src/kile/help/Makefile ])
-AC_CONFIG_FILES([ src/kile/icons/Makefile ])
-AC_CONFIG_FILES([ src/kile/icons/actions/Makefile ])
-AC_CONFIG_FILES([ src/kile/pics/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/arrows/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/cyrillic/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/delimiters/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/greek/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/misc-math/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/misc-text/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/operators/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/relation/Makefile ])
-AC_CONFIG_FILES([ src/kile/symbols/special/Makefile ])
-AC_CONFIG_FILES([ src/kile/syntax/Makefile ])
-AC_CONFIG_FILES([ src/kile/templates/Makefile ])
-AC_CONFIG_FILES([ src/kile/test/Makefile ])
-AC_CONFIG_FILES([ translations/Makefile ])
-AC_CONFIG_FILES([ translations/ar/Makefile ])
-AC_CONFIG_FILES([ translations/ar/messages/Makefile ])
-AC_CONFIG_FILES([ translations/bg/Makefile ])
-AC_CONFIG_FILES([ translations/bg/messages/Makefile ])
-AC_CONFIG_FILES([ translations/br/Makefile ])
-AC_CONFIG_FILES([ translations/br/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ca/Makefile ])
-AC_CONFIG_FILES([ translations/ca/messages/Makefile ])
-AC_CONFIG_FILES([ translations/cs/Makefile ])
-AC_CONFIG_FILES([ translations/cs/messages/Makefile ])
-AC_CONFIG_FILES([ translations/cy/Makefile ])
-AC_CONFIG_FILES([ translations/cy/messages/Makefile ])
-AC_CONFIG_FILES([ translations/da/Makefile ])
-AC_CONFIG_FILES([ translations/da/doc/Makefile ])
-AC_CONFIG_FILES([ translations/da/messages/Makefile ])
-AC_CONFIG_FILES([ translations/de/Makefile ])
-AC_CONFIG_FILES([ translations/de/messages/Makefile ])
-AC_CONFIG_FILES([ translations/el/Makefile ])
-AC_CONFIG_FILES([ translations/el/messages/Makefile ])
-AC_CONFIG_FILES([ translations/en_GB/Makefile ])
-AC_CONFIG_FILES([ translations/en_GB/messages/Makefile ])
-AC_CONFIG_FILES([ translations/es/Makefile ])
-AC_CONFIG_FILES([ translations/es/doc/Makefile ])
-AC_CONFIG_FILES([ translations/es/messages/Makefile ])
-AC_CONFIG_FILES([ translations/et/Makefile ])
-AC_CONFIG_FILES([ translations/et/doc/Makefile ])
-AC_CONFIG_FILES([ translations/et/messages/Makefile ])
-AC_CONFIG_FILES([ translations/eu/Makefile ])
-AC_CONFIG_FILES([ translations/eu/messages/Makefile ])
-AC_CONFIG_FILES([ translations/fi/Makefile ])
-AC_CONFIG_FILES([ translations/fi/messages/Makefile ])
-AC_CONFIG_FILES([ translations/fr/Makefile ])
-AC_CONFIG_FILES([ translations/fr/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ga/Makefile ])
-AC_CONFIG_FILES([ translations/ga/messages/Makefile ])
-AC_CONFIG_FILES([ translations/gl/Makefile ])
-AC_CONFIG_FILES([ translations/gl/messages/Makefile ])
-AC_CONFIG_FILES([ translations/hi/Makefile ])
-AC_CONFIG_FILES([ translations/hi/messages/Makefile ])
-AC_CONFIG_FILES([ translations/hu/Makefile ])
-AC_CONFIG_FILES([ translations/hu/messages/Makefile ])
-AC_CONFIG_FILES([ translations/is/Makefile ])
-AC_CONFIG_FILES([ translations/is/messages/Makefile ])
-AC_CONFIG_FILES([ translations/it/Makefile ])
-AC_CONFIG_FILES([ translations/it/doc/Makefile ])
-AC_CONFIG_FILES([ translations/it/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ja/Makefile ])
-AC_CONFIG_FILES([ translations/ja/messages/Makefile ])
-AC_CONFIG_FILES([ translations/lt/Makefile ])
-AC_CONFIG_FILES([ translations/lt/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ms/Makefile ])
-AC_CONFIG_FILES([ translations/ms/messages/Makefile ])
-AC_CONFIG_FILES([ translations/mt/Makefile ])
-AC_CONFIG_FILES([ translations/mt/messages/Makefile ])
-AC_CONFIG_FILES([ translations/nb/Makefile ])
-AC_CONFIG_FILES([ translations/nb/messages/Makefile ])
-AC_CONFIG_FILES([ translations/nds/Makefile ])
-AC_CONFIG_FILES([ translations/nds/messages/Makefile ])
-AC_CONFIG_FILES([ translations/nl/Makefile ])
-AC_CONFIG_FILES([ translations/nl/doc/Makefile ])
-AC_CONFIG_FILES([ translations/nl/messages/Makefile ])
-AC_CONFIG_FILES([ translations/nn/Makefile ])
-AC_CONFIG_FILES([ translations/nn/messages/Makefile ])
-AC_CONFIG_FILES([ translations/pa/Makefile ])
-AC_CONFIG_FILES([ translations/pa/messages/Makefile ])
-AC_CONFIG_FILES([ translations/pl/Makefile ])
-AC_CONFIG_FILES([ translations/pl/messages/Makefile ])
-AC_CONFIG_FILES([ translations/pt/Makefile ])
-AC_CONFIG_FILES([ translations/pt/doc/Makefile ])
-AC_CONFIG_FILES([ translations/pt/messages/Makefile ])
-AC_CONFIG_FILES([ translations/pt_BR/Makefile ])
-AC_CONFIG_FILES([ translations/pt_BR/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ro/Makefile ])
-AC_CONFIG_FILES([ translations/ro/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ru/Makefile ])
-AC_CONFIG_FILES([ translations/ru/messages/Makefile ])
-AC_CONFIG_FILES([ translations/rw/Makefile ])
-AC_CONFIG_FILES([ translations/rw/messages/Makefile ])
-AC_CONFIG_FILES([ translations/sk/Makefile ])
-AC_CONFIG_FILES([ translations/sk/messages/Makefile ])
-AC_CONFIG_FILES([ translations/sr/Makefile ])
-AC_CONFIG_FILES([ translations/sr/messages/Makefile ])
-AC_CONFIG_FILES([ translations/sr@Latn/Makefile ])
-AC_CONFIG_FILES([ translations/sr@Latn/messages/Makefile ])
-AC_CONFIG_FILES([ translations/sv/Makefile ])
-AC_CONFIG_FILES([ translations/sv/doc/Makefile ])
-AC_CONFIG_FILES([ translations/sv/messages/Makefile ])
-AC_CONFIG_FILES([ translations/ta/Makefile ])
-AC_CONFIG_FILES([ translations/ta/messages/Makefile ])
-AC_CONFIG_FILES([ translations/th/Makefile ])
-AC_CONFIG_FILES([ translations/th/messages/Makefile ])
-AC_CONFIG_FILES([ translations/tr/Makefile ])
-AC_CONFIG_FILES([ translations/tr/messages/Makefile ])
-AC_CONFIG_FILES([ translations/uk/Makefile ])
-AC_CONFIG_FILES([ translations/uk/messages/Makefile ])
-AC_CONFIG_FILES([ translations/zh_CN/Makefile ])
-AC_CONFIG_FILES([ translations/zh_CN/messages/Makefile ])
-AC_OUTPUT
-dnl Put here things to be done at the very end - telling users
-dnl about additional packages to install. Better yet is giving
-dnl each project / subdr its own configure.in.bot.
-
-# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
-if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
-  # And if so, warn when they don't match
-  if test "$kde_libs_prefix" != "$given_prefix"; then
-    # And if kde doesn't know about the prefix yet
-    echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
-    if test $? -ne 0; then
-      echo ""
-      echo "Warning: you chose to install this package in $given_prefix,"
-      echo "but KDE was found in $kde_libs_prefix."
-      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
-      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
-      echo "Then restart KDE."
-      echo ""
-    fi
-  fi
-fi
-
-if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
-  echo ""
-  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
-  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
-  echo ""
-  echo "For better performance, consider including the Qt visibility supporting patch"
-  echo "located at:"
-  echo ""
-  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
-  echo ""
-  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
-  echo "everything will continue to work just fine without it."
-  echo ""
-fi
-
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi

configure.in.bot

@@ -1,4 +0,0 @@
-dnl Put here things to be done at the very end - telling users
-dnl about additional packages to install. Better yet is giving
-dnl each project / subdr its own configure.in.bot.
-

configure.in.in

@@ -1,12 +0,0 @@
-#MIN_CONFIG(3.2)
-KDE_ENABLE_HIDDEN_VISIBILITY
-CXXFLAGS="$CXXFLAGS $KDE_DEFAULT_CXXFLAGS"
-
-if test "$build_arts" = "yes"; then
-    AC_DEFINE(USE_ARTS, 1, [If we use arts volume])
-    LIB_ARTS="-lartskde"
-    AC_SUBST(LIB_ARTS)
-fi
-
-KDE_INIT_DOXYGEN([The API Reference], [Version $VERSION])
-

doc/Makefile.am

@@ -1,2 +0,0 @@
-KDE_LANG = en
-KDE_DOCS = kile

doc/da/index.docbook

@@ -5617,15 +5617,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/en/index.docbook

@@ -3718,15 +3718,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/es/index.docbook

@@ -6071,15 +6071,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/et/index.docbook

@@ -6054,15 +6054,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/it/index.docbook

@@ -6096,15 +6096,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/man/kile.1

@@ -0,0 +1,64 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KILE 1 "June 22, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kile \- the TDE Integrated LaTeX Environment
+.SH SYNOPSIS
+.B kile [ \fIgeneric-options\fP ]
+[ \fB\-\-line\fP \fIline\fP ] [ \fB\-\-new\fP ]
+[ \fIfile\fP ]
+.SH DESCRIPTION
+\fBKile\fP (the TDE Integrated LaTeX Environment) is a user-friendly
+LaTeX source editor and TeX shell for TDE.
+.PP
+The source editor is a multi-document editor designed for .tex and .bib
+files.  Menus, wizards and auto-completion are provided to assist with
+tag insertion and code generation.  A structural view of the document
+assists with navigation within source files.
+.PP
+The TeX shell integrates the various tools required for TeX processing.
+It assists with LaTeX compilation, DVI and postscript document viewing,
+generation of bibliographies and indices and other common tasks.
+.PP
+Kile can support large projects consisting of several smaller files.
+.SH OPTIONS
+Below are the kile-specific options.
+For a full summary of options, run \fIkile \-\-help\fP.
+.TP
+\fB\-\-line\fP \fIline\fP
+Jump to the given line in the file that is opened.
+.TP
+\fB\-\-new\fP
+Start a new Kile main window.
+.SH SEE ALSO
+Full user documentation is available through the TDE Help Centre.
+You can also enter the URL
+\fIhelp:/kile/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kile/\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can
+read this documentation in HTML format from
+\fI/usr/share/doc/tde/HTML/en/kile/\fP.
+.SH AUTHOR
+Kile was written by Pascal Brachet <pascal.brachet_at_club-internet.fr> and
+Jeroen Wijnhout <Jeroen.Wijnhout_at_kdemail.net> with contributions from
+many others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).

doc/nl/index.docbook

@@ -2907,15 +2907,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/pt/index.docbook

@@ -5722,15 +5722,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

doc/sv/index.docbook

@@ -6039,15 +6039,3 @@
 &documentation.index;
 
 </book>
-
-<!--
-Local Variables:
-mode: xml
-sgml-minimize-attributes:nil
-sgml-general-insert-case:lower
-sgml-indent-step:0
-sgml-indent-data:nil
-End:
-
-vim:tabstop=2:shiftwidth=2:expandtab
--->

src/CMakeL10n.txt

@@ -0,0 +1,8 @@
+##### create translation templates ##############
+
+tde_l10n_auto_add_subdirectories( )
+
+tde_l10n_create_template(
+	CATALOG "desktop_files/kile-desktops"
+	SOURCES *.desktop
+)

src/CMakeLists.txt

@@ -1,139 +1,22 @@
-PROJECT( kile )
 
-CMAKE_MINIMUM_REQUIRED( VERSION 2.8 )
+add_subdirectory( kile )
 
 
-SET( KILE_VERSION CACHE STRING "Kile's version; can be used to install special documentation files in share/doc/kile-$KILE_VERSION/" )
+##### other data
 
-SET( kile_PO_FILE "kile.po" )
-SET( kile_DOCBOOK "index.docbook" )
+tde_create_translated_desktop(
+  SOURCE x-kilepr.desktop
+  DESTINATION ${MIME_INSTALL_DIR}/text
+)
 
-MACRO( KILE_ADD_DOCBOOK_DIRECTORY _sources _relative_dir _docbook _language )
-	# only depend on images
-	FILE( GLOB_RECURSE _dependencies ${CMAKE_CURRENT_SOURCE_DIR}/${_relative_dir}/*.[pP][nN][gG] )
-	FILE( MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${_relative_dir} )
-
-	SET( _source_docbook ${CMAKE_CURRENT_SOURCE_DIR}/${_relative_dir}/${_docbook} )
-	SET( _compiled_docbook ${CMAKE_CURRENT_BINARY_DIR}/${_relative_dir}/index.cache.bz2 )
-
-	ADD_CUSTOM_COMMAND(OUTPUT ${_compiled_docbook}
-			COMMAND ${KILE_MEINPROC} --check --cache index.cache.bz2 ${_source_docbook}
-			DEPENDS ${_dependencies} ${_source_docbook}
-			WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${_relative_dir}
-			COMMENT "Compiling ${_language} docbook in ${_relative_dir}/${_docbook}" )
-
-	INSTALL( FILES ${_compiled_docbook} ${_dependencies} DESTINATION share/doc/tde/HTML/${_language})
-	SET( ${_sources} ${${_sources}} ${_compiled_docbook} )
-ENDMACRO( KILE_ADD_DOCBOOK_DIRECTORY _sources _docbook _language )
-
-MACRO( KILE_ADD_TRANSLATION_DIRECTORY _sources _relative_dir _file _language )
-	FILE( MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${_relative_dir} )
-
-	GET_FILENAME_COMPONENT(_base_name ${_file} NAME_WE)
-	SET( _source_file ${CMAKE_CURRENT_SOURCE_DIR}/${_relative_dir}/${_file} )
-	SET( _base_compiled_file ${_base_name}.mo)
-	SET( _compiled_file ${CMAKE_CURRENT_BINARY_DIR}/${_relative_dir}/${_base_compiled_file} )
-
-	ADD_CUSTOM_COMMAND(OUTPUT ${_compiled_file}
-			COMMAND ${KILE_MSGFMT} -o ${_compiled_file} ${_source_file}
-			DEPENDS ${_source_file}
-			WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${_relative_dir}
-			COMMENT "Compiling ${_language} translation file" )
-
-	INSTALL( FILES ${_compiled_file} DESTINATION share/locale/${_language}/LC_MESSAGES )
-	SET( ${_sources} ${${_sources}} ${_compiled_file} )
-ENDMACRO( KILE_ADD_TRANSLATION_DIRECTORY _sources _relative_dir _file _language )
-
-MACRO( KILE_ADD_TRANSLATION_DIRECTORIES _documentation_sources _translation_sources _dir )
-	FILE( GLOB _subdirectories ${_dir}/* )
-
-	FOREACH( _entry ${_subdirectories} )
-		IF( IS_DIRECTORY ${_entry} )
-			GET_FILENAME_COMPONENT( _language ${_entry} NAME )
-			IF( KILE_MSGFMT AND EXISTS ${_entry}/messages )
-				KILE_ADD_TRANSLATION_DIRECTORY( ${_translation_sources} translations/${_language}/messages ${kile_PO_FILE} ${_language} )
-				SET(_translations_built ${_translations_built} ${_language} )
-			ENDIF( KILE_MSGFMT AND EXISTS ${_entry}/messages )
-			IF( KILE_MEINPROC AND EXISTS ${_entry}/doc )
-				KILE_ADD_DOCBOOK_DIRECTORY( ${_documentation_sources} translations/${_language}/doc ${kile_DOCBOOK} ${_language} )
-				SET(_docbooks_built ${_docbooks_built} ${_language} )
-			ENDIF( KILE_MEINPROC AND EXISTS ${_entry}/doc )
-		ENDIF( IS_DIRECTORY ${_entry} )
-	ENDFOREACH( _entry ${_subdirectories} )
-
-	IF( _translations_built )
-		MESSAGE( STATUS "Building translations for ${_translations_built}" )
-	ELSE( _translations_built )
-		MESSAGE( STATUS "Not building translations" )
-	ENDIF( _translations_built )
-
-	IF( _docbooks_built )
-		MESSAGE( STATUS "Building documentation for ${_docbooks_built}" )
-	ELSE( _docbooks_built )
-		MESSAGE( STATUS "Not building additional documentation" )
-	ENDIF( _docbooks_built )
-ENDMACRO( KILE_ADD_TRANSLATION_DIRECTORIES _documentation_sources _translation_sources _dir )
-
-MACRO( KILE_FIND_DOC_TOOLS )
-	FIND_PROGRAM( KILE_MEINPROC "meinproc" DOC "path of the meinproc executable")
-	IF( KILE_MEINPROC )
-		MESSAGE( STATUS "Found meinproc executable: ${KILE_MEINPROC}" )
-	ELSE( KILE_MEINPROC )
-		MESSAGE( STATUS "meinproc executable not found" )
-	ENDIF( KILE_MEINPROC )
-	FIND_PROGRAM( KILE_MSGFMT "msgfmt" DOC "path of the msgfmt executable")
-	IF( KILE_MEINPROC )
-		MESSAGE( STATUS "Found msgfmt executable: ${KILE_MSGFMT}" )
-	ELSE( KILE_MEINPROC )
-		MESSAGE( STATUS "msgfmt executable not found" )
-	ENDIF( KILE_MEINPROC )
-	IF( KILE_MEINPROC AND KILE_MSGFMT )
-		SET( KILE_DOC_TOOLS_FOUND true )
-	ENDIF( KILE_MEINPROC AND KILE_MSGFMT )
-ENDMACRO( KILE_FIND_DOC_TOOLS )
-
-IF( EXISTS ${kile_SOURCE_DIR}/doc OR EXISTS ${kile_SOURCE_DIR}/translations )
-	KILE_FIND_DOC_TOOLS( )
-ENDIF(  EXISTS ${kile_SOURCE_DIR}/doc OR EXISTS ${kile_SOURCE_DIR}/translations )
-
-IF( EXISTS ${kile_SOURCE_DIR}/doc )
-	IF( KILE_MEINPROC )
-		MESSAGE( STATUS "Building standard documentation")
-		KILE_ADD_DOCBOOK_DIRECTORY( kile_DOCUMENTATION_SOURCES doc index.docbook en )
-	ENDIF( KILE_MEINPROC )
-ELSE( EXISTS ${kile_SOURCE_DIR}/doc )
-	MESSAGE( STATUS "Not building standard documentation")
-ENDIF( EXISTS ${kile_SOURCE_DIR}/doc )
-
-IF( EXISTS ${kile_SOURCE_DIR}/translations )
-	IF( KILE_MEINPROC OR KILE_MSGFMT )
-		KILE_ADD_TRANSLATION_DIRECTORIES( kile_DOCUMENTATION_SOURCES kile_TRANSLATION_SOURCES ${kile_SOURCE_DIR}/translations )
-	ENDIF( KILE_MEINPROC OR KILE_MSGFMT )
-ELSE( EXISTS ${kile_SOURCE_DIR}/translations )
-	MESSAGE( STATUS "Not building translations")
-ENDIF( EXISTS ${kile_SOURCE_DIR}/translations )
-
-IF( kile_DOCUMENTATION_SOURCES )
-	ADD_CUSTOM_TARGET(docbooks ALL DEPENDS ${kile_DOCUMENTATION_SOURCES})
-ENDIF( kile_DOCUMENTATION_SOURCES )
-
-IF( kile_TRANSLATION_SOURCES )
-	ADD_CUSTOM_TARGET(translations ALL DEPENDS ${kile_TRANSLATION_SOURCES})
-ENDIF( kile_TRANSLATION_SOURCES)
-
-ADD_SUBDIRECTORY( kile )
-
-########### install files ###############
-
-INSTALL( FILES x-kilepr.desktop DESTINATION share/mimelink/text )
-
-INSTALL( FILES kile.upd kile1.6_upd.pl kile1.7_upd.pl kile1.9_upd.pl kile1.9-1_upd.pl kile2.0-1_upd.pl kile2.0-2_upd.pl kile2.0-3_upd.pl kile2.0-4_upd.pl kile2.0-5_upd.pl DESTINATION share/apps/tdeconf_update )
-
-IF( KILE_VERSION )
-	SET(_KILE_SPECIAL_DOC_DIR "share/doc/kile-${KILE_VERSION}")
-ELSE( KILE_VERSION )
-	SET(_KILE_SPECIAL_DOC_DIR "share/doc/kile")
-ENDIF( KILE_VERSION )
-
-INSTALL( FILES AUTHORS ChangeLog README README.cwl kile-remote-control.txt README.MacOSX TODO DESTINATION ${_KILE_SPECIAL_DOC_DIR}) 
+install(
+  FILES kile.upd
+  DESTINATION ${KCONF_UPDATE_INSTALL_DIR}
+)
 
+install(
+  PROGRAMS
+    kile1.6_upd.pl kile1.7_upd.pl kile1.9_upd.pl kile1.9-1_upd.pl
+    kile2.0-1_upd.pl kile2.0-2_upd.pl kile2.0-3_upd.pl kile2.0-4_upd.pl kile2.0-5_upd.pl
+  DESTINATION ${KCONF_UPDATE_INSTALL_DIR}
+)

src/Makefile.am

@@ -1,15 +0,0 @@
-####### tdevelop will overwrite this part!!! (begin)##########
-SUBDIRS = kile
-
-mimetypetextdata_DATA = x-kilepr.desktop
-mimetypetextdatadir = $(kde_mimedir)/text
-
-update_DATA = kile.upd
-update_SCRIPTS = kile1.6_upd.pl kile1.7_upd.pl kile1.9-1_upd.pl kile1.9_upd.pl \
-	kile2.0-1_upd.pl kile2.0-2_upd.pl kile2.0-3_upd.pl kile2.0-4_upd.pl kile2.0-5_upd.pl
-updatedir = $(kde_datadir)/tdeconf_update
-
- EXTRA_DIST = kile.kdevprj admin AUTHORS COPYING ChangeLog kile-remote-control.txt README README.cwl README.MacOSX kile.lsm $(mimetypetextdata_DATA)
-
-
-

src/dist/build_tarball.sh

@@ -1,2 +0,0 @@
-export UNSERMAKE=no
-./createPackage.sh -ab trunk/extragear/office -a kile --i18n-sub extragear-office --admin branches/KDE/3.5/kde-common/admin -av 1.9 --package

src/dist/createPackage.sh

@@ -1,876 +0,0 @@
-#!/bin/bash
-#
-# Extract an application from KDE svn, including documentation and translations.
-#
-# Authors: Michael Buesch <mbuesch@freenet.de>
-#          Jeroen Wijnhout <Jeroen.Wijnhout@kdemail.net>
-#          Sebastian Trueg
-#          Aurelien Gateau
-#          Klas Kalass
-# License: GPL (http://www.gnu.org/)
-#
-#
-# Directory lay-out of packages
-# Application:
-# + name-version
-#        + admin
-#        + src
-#        + doc
-#        + translations
-#            + nl
-#                + messages
-#                + doc
-#            + de (etc.)
-#
-# If the --notoplevel parameter is used everything under src is put into the root dir
-#
-# Translations:
-#        + nl
-#            + messages
-#            + doc
-#        + de (etc.)
-
-COPYRIGHT="2005 Michael Buesch <mbuesch@freenet.de>
-          2004-2005 Jeroen Wijnhout <Jeroen.Wijnhout@kdemail.net>
-          2003-2004 Sebastian Trueg
-          2002 Aurelien Gateau
-          2002-2004 Klas Kalass"
-LICENSE="GNU General Public License v2 or later"
-
-SCRIPTNAME="createPackage.sh"
-SCRIPTVERSION='$Revision$'
-SCRIPTVERSION="`echo $SCRIPTVERSION | cut -d ' ' -f2`"
-
-
-function showVersion
-{
-    echo "$SCRIPTNAME revision $SCRIPTVERSION"
-}
-
-function showHelp
-{
-    showVersion
-    echo -e "
-Extract an application from KDE svn, including documentation and translations.
-
-Copyright $COPYRIGHT
-License: $LICENSE
-
-usage:
-    $0 -ab <PATH> -a <NAME> [OPTIONS]
-
-These parameters are mandatory:
-
-    -ab|--app-base <PATH>       Relative (to svnroot) path to the KDE or extragear module.
-                                Example:
-                                    trunk/extragear/utils
-                                If you want to checkout from a branch, you might use:
-                                    branches/foobar/1.2
-
-    -a|--app <NAME>             Name of the application to checkout.
-                                This is the subdir you want to checkout in --app-base.
-
-The following options are available:
-
-    -d|--svnroot <URL>          Base URL of the svn repository.
-                                svn://anonsvn.kde.org/home/kde is the default.
-
-    -ib|--i18n-base <PATH>      Path to the i18n translations base.
-                                Default:
-                                    trunk/l10n
-
-    -is|--i18n-sub <PATH>       Path to the i18n files under the
-                                \$i18n-base/\$LANGUAGE/messages
-                                directories. Example:
-                                    extragear-office
-
-    -ids|--i18n-docsub <PATH>   Path to the i18n docbook files under the
-                                \$i18n-base/\$LANGUAGE/docs
-                                directories. Example:
-                                    kdeextragear-2
-                                Default:
-                                    path of --i18n-sub
-
-    --admin <PATH>              Path to the /admin/ directory.
-                                Default:
-                                    trunk/KDE/kde-common/admin
-
-    -b|--builddir <DIRNAME>     Name of the temporary working directory where
-                                all files will be put. Default is \"./build\"
-
-    -av|--appversion <VERSION>  Version of the application (only for correct
-                                naming of the tar archives).
-
-    --nodoc                     Do not try to get any documentation.
-
-    --noi18n                    Do not search for any translations.
-
-    --split                     Make separate packages for the application and translations.
-
-    --package [TYPE]            Create tarballs (.tar.gz and/or .tar.bz2).
-                                You can specify an optional package type: \"gzip\" or \"bzip2\"
-                                If no type is given, both types will be generated.
-
-    --packagedir <TARBALLDIR>   Place a copy of the packages into TARBALLDIR.
-
-    --postprocess <SCRIPT>      Runs SCRIPT on the package, after all data is gathered, but before
-                                the tarball is generated. This allows packagers to give the
-                                \"final touch\" to the package.
-
-    --pofiles <POFILES>         Space seperated list of pofiles this application uses without the extension.
-                                Defaults to the name of the application.
-
-    -l|--languages <LANGUAGES>  Space seperated list of languages to search for
-                                translations. If no languages are specified, all
-                                available languages will be included.
-
-    -el|--exclude-languages <LANGUAGES> Space seperated list of languages not to include
-                                        in the package.
-
-    --logfile <FILE>            Write all logging information to FILE.
-                                If FILE is \"no\", no logfile will be created.
-
-    --notoplevel                Do not create an additional src directory. Do not checkout the top level files.
-                                Use configure.in.in and Makefile.am from the application's root directory.
-
-    -v|--version                Version of this script
-    -h|--help                   This Help"
-}
-
-#
-# Some simple helper functions.
-#
-
-function printlog
-{
-    if [ -n "$LOGFILE" ]; then
-        echo -e "$SCRIPTNAME: $*" >> $LOGFILE
-    fi
-}
-
-function printnlog
-{
-    if [ -n "$LOGFILE" ]; then
-        echo -n -e "$SCRIPTNAME: $*" >> $LOGFILE
-    fi
-}
-
-function print
-{
-    echo -e "$SCRIPTNAME: $*"
-    printlog $*
-}
-
-function printn
-{
-    echo -n -e "$SCRIPTNAME: $*"
-    printnlog $*
-}
-
-function runCommand
-{
-    stdoutlog="$LOGFILE"
-    if [ -z "$stdoutlog" ]; then
-        stdoutlog="/dev/null"
-    fi
-    $* >> $stdoutlog 2>&1
-    LASTRESULT=$?
-    print "         [$1 returned $LASTRESULT]"
-}
-
-function runCommandRedirect
-{
-    destinationfile=$1
-    shift
-
-    stdoutlog="$LOGFILE"
-    if [ -z "$stdoutlog" ]; then
-        stdoutlog="/dev/null"
-    fi
-    $* > $destinationfile 2>>$stdoutlog
-    LASTRESULT=$?
-    if [ $LASTRESULT -ne 0 ]; then
-        rm $destinationfile
-    fi
-    print "         [$1 returned $LASTRESULT]"
-}
-
-function testParameter
-{
-    if [ -z "$2" ]; then
-        echo "Please give a value to parameter $1"
-        exit 1
-    fi
-}
-
-function makeDir
-{
-    cd $BUILDDIR
-    print "                  Creating directory $*"
-    runCommand mkdir $*
-}
-
-
-#
-# Removes the .svn directories
-#
-function removeVCDirs
-{
-    if ! [ -d "$BUILDDIR/$*" ]; then
-        return
-    fi
-    print "                  Removing VCDirs $*"
-    cd $BUILDDIR/$*
-    find . -type d -a -name '.svn' | xargs rm -rf
-}
-
-#
-# This is our work-horse. getResource retrieves all
-# data needed to assemble a working package.
-# Available resources:
-# topleveldir, admindir, source, documentation,
-# languagelist, guitranslation, doctranslation
-#
-function getResource
-{
-    DESTINATION=$2
-    SINGLEFILEHACK="no"
-    case $1 in
-        topleveldir)
-            COMMAND="svn export -N $SVN_CHECKOUT_OPTIONS $SVNROOT/$APPBASE $DESTINATION"
-        ;;
-        admindir)
-            COMMAND="svn export $SVN_CHECKOUT_OPTIONS $SVNROOT/$ADMINDIR $DESTINATION"
-        ;;
-        source)
-            COMMAND="svn export $SVN_CHECKOUT_OPTIONS $SVNROOT/$APPBASE/$APPNAME $DESTINATION"
-        ;;
-        documentation)
-            COMMAND="svn export $SVN_CHECKOUT_OPTIONS $SVNROOT/$APPBASE/doc/$APPNAME $DESTINATION"
-        ;;
-        languagelist)
-            SINGLEFILEHACK="yes"
-            COMMAND="svn cat $SVN_CHECKOUT_OPTIONS $SVNROOT/$I18NBASE/subdirs"
-        ;;
-        guitranslation)
-            DESTINATION=$3/$4.po
-            SINGLEFILEHACK="yes"
-            COMMAND="svn cat $SVN_CHECKOUT_OPTIONS $SVNROOT/$I18NBASE/$2/messages/$I18NSUB/$4.po"
-        ;;
-        doctranslation)
-            DESTINATION=$3
-            COMMAND="svn export $SVN_CHECKOUT_OPTIONS $SVNROOT/$I18NBASE/$2/docs/$I18NDOCSUB/$APPNAME $DESTINATION"
-        ;;
-        *)
-            print "ERROR: Unknown resource $1"
-            exit 1
-        ;;
-    esac
-
-    print "         Retrieving resource: $1"
-    printlog "         getResource $1: $COMMAND"
-
-    cd $BUILDDIR
-
-    if [ $SINGLEFILEHACK = "yes" ]; then
-       runCommandRedirect $DESTINATION $COMMAND
-    else
-       runCommand $COMMAND
-    fi
-
-    if [ $LASTRESULT != "0" ]; then
-        print "Warning: Resource \"$1\" is not available."
-    fi
-    return $LASTRESULT
-}
-
-#
-# Creates the build dir, the dir where the packages
-# are assembled.
-#
-function setupBuildDir
-{
-    print "Creating the build directory..."
-    print "         ($BUILDDIR)"
-
-    # clean up first
-    if [ -d $BUILDDIR ]; then
-        print "         Removing the old build directory"
-        rm -rf $BUILDDIR
-    fi
-
-    mkdir $BUILDDIR
-}
-
-#
-# Gather all data in the build dir needed to build
-# the application (without translations).
-#
-function assembleApplicationData
-{
-    print "Assembling the source code..."
-    APPDIR=$APPNAME-$APPVERSION
-    print "         ($APPDIR)"
-
-    if [ $TOPLEVEL = "yes" ]; then
-        getResource "topleveldir" $APPDIR
-    fi
-
-    getResource "admindir" $APPDIR/admin
-
-    if [ $TOPLEVEL = "yes" ]; then
-        getResource "source" $APPDIR/src
-    else
-        getResource "source" $APPDIR
-    fi
-}
-
-#
-# Copies the GNU (README, TODO, Changelog, etc.) files.
-#
-function moveGNUFiles
-{
-    print "         Moving the standard GNU files"
-    for file in $GNUFiles
-    do
-        if [ -f $BUILDDIR/$APPDIR/src/$file ]; then
-            mv $BUILDDIR/$APPDIR/src/$file $BUILDDIR/$1
-        fi
-    done
-}
-
-#
-# Cleanup the application or i18n directory by removing
-# unneccessary files and directories.
-#
-function cleanupDirectory
-{
-    dir="$1"
-    print "Removing unneccessary files and directories"
-    for file in $CLEANUPFILES
-    do
-        path="$dir/$file"
-        if [ -f "$path" ]; then
-            rm -f $path
-            printlog "         Removed file: $path"
-        elif [ -d "$path" ]; then
-            rm -Rf $path
-            printlog "         Removed directory: $path"
-        fi
-    done
-}
-
-#
-# After all data for the app is gathered, some files
-# still need to be shuffled around.
-#
-function postProcessApplicationDir
-{
-    print "Post-processing the application directory..."
-    if [ $TOPLEVEL = "yes" ]; then
-        moveGNUFiles $APPDIR
-    fi
-
-    if [ ! -z "$POSTPROCESSSCRIPT" ]; then
-        print "Running post-processing script..."
-        cd $BUILDDIR/$APPDIR
-        $POSTPROCESSSCRIPT
-        err="$?"
-        if [ $err -ne 0 ]; then
-            print "ERROR: Post-processing script failed (return status: $err)"
-            exit $err
-        fi
-        print "Post-processing script finished."
-    fi
-}
-
-function retrieveDocumentation
-{
-    if [ $GETDOC = "no" ]; then
-        return
-    fi
-
-    print "Retrieving the documentation..."
-    DOCDIR=$APPDIR/doc
-    print "         ($DOCDIR)"
-
-    getResource "documentation" $DOCDIR
-}
-
-#
-# Determines what languages need to be retrieved.
-# If LANGUAGES was not set using the -l switch,
-# the tde-i18n/subdirs file is used.
-#
-function getLanguageList
-{
-    print "         Determining which languages to include..."
-    if [ -z "$LANGUAGES" ]; then
-        getResource "languagelist" languagelist
-        if [ -e $BUILDDIR/languagelist ]; then
-            LANGUAGES=`cat $BUILDDIR/languagelist`
-            rm $BUILDDIR/languagelist
-        else
-            print "ERROR:"
-            print "ERROR: Failed to automatically detect which languages to include."
-            print "ERROR:"
-            exit 1
-        fi
-    fi
-
-    # Remove the excluded languages from the list
-    LANGLIST=""
-    for language in $LANGUAGES ; do
-        EXCLUDE="false"
-        for exclang in $EXCLUDELANGUAGES ; do
-            if [ "$exclang" = "$language" ]; then
-                EXCLUDE="true"
-                break
-            fi
-        done
-        if [ $EXCLUDE = "false" ]; then
-            LANGLIST="$LANGLIST $language"
-        fi
-    done
-    LANGUAGES=$LANGLIST
-    print "Language list: $LANGUAGES"
-}
-
-#
-# Creates the dir that holds the translations. This is either
-# a "translations" dir in the application build dir, or, if the
-# --split switch is used, the root dir of a separate i18n package.
-#
-function setupI18NDir
-{
-    if [ $SPLIT = "yes" ]; then
-        I18NDIR="$APPNAME-i18n-$APPVERSION"
-
-        getResource "topleveldir" $I18NDIR
-        getResource "admindir" $I18NDIR/admin
-        moveGNUFiles $I18NDIR
-
-        TRANSDIR=$I18NDIR
-    else
-        I18NDIR=$APPDIR
-        TRANSDIR="$I18NDIR/translations"
-        makeDir $TRANSDIR
-    fi
-}
-
-function createTranslationDirMakefile
-{
-    if [ $GETI18N = "no" ]; then
-        return
-    fi
-
-    print "         Creating Makefile.am in $1."
-    CONTENTS="SUBDIRS=$INCLUDED_LANGUAGES"
-    echo $CONTENTS > $1/Makefile.am
-}
-
-function createTranslationMakefile
-{
-    print "         Creating Makefile.am in $1."
-    CONTENTS="SUBDIRS="
-    if [ -d "$1/messages" ]; then
-        CONTENTS="$CONTENTS messages"
-    fi
-    if [ -d "$1/doc" ]; then
-        CONTENTS="$CONTENTS doc";
-    fi
-    echo $CONTENTS > $1/Makefile.am
-}
-
-function createTranslationMakefiles
-{
-    if [ $GETI18N = "no" ]; then
-        return
-    fi
-
-    for language in $INCLUDED_LANGUAGES ; do
-        createTranslationMakefile $BUILDDIR/$TRANSDIR/$language
-    done
-}
-
-function createGUITranslationMakefile
-{
-    print "         Creating Makefile.am in $2."
-    echo "KDE_LANG = $1
-SUBDIRS = \$(AUTODIRS)
-POFILES = AUTO" > $2/Makefile.am
-}
-
-function createDocTranslationMakefile
-{
-    print "                  Creating Makefile.am in $2."
-    echo "KDE_LANG = $1
-KDE_DOCS=$APPNAME" > $2/Makefile.am
-}
-
-#
-# Get the .po files and put them in xx/messages
-# subdirectories, where xx is the language ISO code.
-#
-function retrieveGUITranslations
-{
-    if [ $GETI18N = "no" ]; then
-        return
-    fi
-
-    print "Retrieving GUI translations..."
-    setupI18NDir
-    print "         ($TRANSDIR)"
-
-    # determine which languages to get
-    getLanguageList
-
-    # then get them (its really simple actually)
-    INCLUDED_LANGUAGES=""
-    for language in $LANGUAGES
-    do
-        print "         Including language $language"
-        makeDir $TRANSDIR/$language
-        makeDir $TRANSDIR/$language/messages
-        INCLUDE_THIS_LANG="yes"
-        for pofile in $APP_POFILES; do
-            getResource "guitranslation" $language $TRANSDIR/$language/messages $pofile
-            if [ ! -e $BUILDDIR/$TRANSDIR/$language/messages/$pofile.po ]; then
-                INCLUDE_THIS_LANG="no"
-            fi
-        done
-
-        if [ $INCLUDE_THIS_LANG = "yes" ]; then
-            createGUITranslationMakefile $language $BUILDDIR/$TRANSDIR/$language/messages
-            INCLUDED_LANGUAGES="$INCLUDED_LANGUAGES $language"
-        else
-            rm -rf $TRANSDIR/$language
-        fi
-    done
-}
-
-function retrieveDocTranslations
-{
-    if [ $GETI18N = "no" ]; then
-        return
-    fi
-
-    print "Retrieving documentation translations..."
-
-    for language in $INCLUDED_LANGUAGES ; do
-        print "         Including documentation for language $language"
-        getResource "doctranslation" $language $TRANSDIR/$language/doc
-        if [ -e $BUILDDIR/$TRANSDIR/$language/doc/index.docbook ]
-        then
-            createDocTranslationMakefile $language $BUILDDIR/$TRANSDIR/$language/doc
-        else
-            print "                  No translations for $language docs available."
-            rm -rf $TRANSDIR/$language/doc
-        fi
-    done
-}
-
-#
-# Create the configure script and Makefile.in's.
-#
-function packageApplication
-{
-    cd $BUILDDIR
-
-    print "Creating configure script and Makefile.in files"
-    (cd $APPDIR; runCommand make -f admin/Makefile.common cvs)
-
-    cleanupDirectory $APPDIR
-
-    TARNAME="$APPNAME-$APPVERSION.tar"
-    if [ $PACKAGE = "gzip" ] || [ $PACKAGE = "yes" ]; then
-        print "Packaging application ($TARNAME.gz)..."
-        $GZIP $TARNAME.gz $APPDIR
-        if [ $BUILDDIR != $TARBALLDIR ]; then
-            cp $TARNAME.gz $TARBALLDIR
-        fi
-    fi
-    if [ $PACKAGE = "bzip2" ] || [ $PACKAGE = "yes" ]; then
-        print "Packaging application ($TARNAME.bz2)..."
-        $BZIP2 $TARNAME.bz2 $APPDIR
-        if [ $BUILDDIR != $TARBALLDIR ]; then
-            cp $TARNAME.bz2 $TARBALLDIR
-        fi
-    fi
-}
-
-#
-# Create the configure script and Makefile.in's.
-#
-function packageTranslations
-{
-    if [ $SPLIT != "yes" ] || [ $GETI18N != "yes" ]; then
-        return
-    fi
-
-    cd $BUILDDIR
-
-    print "Creating translations configure script and Makefile.in files"
-    (cd $I18NDIR; runCommand make -f admin/Makefile.common cvs)
-
-    cleanupDirectory $I18NDIR
-
-    TARNAME="$APPNAME-i18n-$APPVERSION.tar"
-    if [ $PACKAGE = "gzip" ] || [ $PACKAGE = "yes" ]; then
-        print "Packaging translations ($TARNAME.gz)..."
-        $GZIP $TARNAME.gz $I18NDIR
-        if [ $BUILDDIR != $TARBALLDIR ]; then
-            cp $TARNAME.gz $TARBALLDIR
-        fi
-    fi
-    if [ $PACKAGE = "bzip2" ] || [ $PACKAGE = "yes" ]; then
-        print "Packaging translations ($TARNAME.bz2)..."
-        $BZIP2 $TARNAME.bz2 $I18NDIR
-        if [ $BUILDDIR != $TARBALLDIR ]; then
-            cp $TARNAME.bz2 $TARBALLDIR
-        fi
-    fi
-}
-
-#
-# Force the script to quit
-#
-function cancelScript
-{
-    errorcode="$1"
-    if [ -z "$errorcode" ]
-    then
-        errorcode="1"
-    fi
-    print "Script canceled ($errorcode)"
-    exit $errorcode
-}
-
-#
-# Do basic parameter checks, print some basic stuff
-# and initialize basic things.
-#
-function initBasic
-{
-    trap "cancelScript" SIGINT SIGTERM
-
-    if [ -n "$LOGFILE" ]; then
-        echo "$SCRIPTNAME revision $SCRIPTVERSION  `date`" > $LOGFILE
-    fi
-
-    if [ -z "$APPBASE" ]; then
-        print "You need to specify an application base path (--app-base). See $SCRIPTNAME --help for more info."
-        exit 1
-    fi
-    if [ -t "$APPNAME" ]; then
-        print "You need to specify an application name (--app). See $SCRIPTNAME --help for more info."
-        exit 1
-    fi
-    if [ "$GETI18N" = "yes" ] && [ -z "$I18NSUB" ]; then
-        print "You need to specify the i18n subdir or disable i18n checkout (--i18n-sub or --noi18n). See $SCRIPTNAME --help for more info."
-        exit 1
-    fi
-    if [ -z "$I18NDOCSUB" ]; then
-        I18NDOCSUB="$I18NSUB"
-    fi
-
-    if [ -z "$APP_POFILES" ]; then
-        APP_POFILES="$APPNAME"
-    fi
-
-    print "Using svn-root: $SVNROOT"
-}
-
-function initVars
-{
-    LOGFILE="$PWD/$SCRIPTNAME.log"
-
-    APPBASE=""
-    APPNAME=""
-    SVNROOT="svn://anonsvn.kde.org/home/kde"
-    I18NBASE="trunk/l10n"
-    I18NSUB=""
-    I18NDOCSUB=""
-    APP_POFILES=""
-    ADMINDIR="trunk/KDE/kde-common/admin"
-
-    LASTRESULT="0"
-    BUILDDIR="$PWD/build"
-    TARBALLDIR=$BUILDDIR
-    APPVERSION="`date +%d.%m.%y`"
-    GETDOC="yes"
-    GETI18N="yes"
-    SPLIT="no"
-    TOPLEVEL="yes"
-    PLAINCONFIGURE="no"
-    LISTTAGS="no"
-    PACKAGE="no"
-    LANGUAGES=""
-    EXCLUDELANGUAGES="xx"
-    GNUFiles="AUTHORS COPYING ChangeLog INSTALL TODO README README.MacOSX README.cwl kile-remote-control.txt Building-with-cmake.txt"
-    CLEANUPFILES="autom4te.cache Makefile.cvs"
-    POSTPROCESSSCRIPT=""
-
-    SVN_CHECKOUT_OPTIONS=""
-
-    BZIP2="tar jcf"
-    GZIP="tar zcf"
-}
-
-####################################################################
-##                                                                ##
-##                       Here we start:                           ##
-##                                                                ##
-####################################################################
-
-# Set the default values for options.
-initVars
-
-# Process the options given on the command-line.
-while [ "$#" -gt 0 ]
-do
-    case $1 in
-        -ab|--app-base)
-            testParameter $1 $2
-            APPBASE="$2"
-            shift
-        ;;
-        -a|--app)
-            testParameter $1 $2
-            APPNAME="$2"
-            shift
-        ;;
-        -d|--svnroot)
-            testParameter $1 $2
-            SVNROOT="$2"
-            shift
-        ;;
-        -ib|--i18n-base)
-            testParameter $1 $2
-            I18NBASE="$2"
-            shift
-        ;;
-        -is|--i18n-sub)
-            testParameter $1 $2
-            I18NSUB="$2"
-            shift
-        ;;
-        -ids|--i18n-docsub)
-            testParameter $1 $2
-            I18NDOCSUB="$2"
-            shift
-        ;;
-        --admin)
-            testParameter $1 $2
-            ADMINDIR="$2"
-            shift
-        ;;
-        -b|--builddir)
-            testParameter $1 $2
-            BUILDDIR="$2"
-            shift
-        ;;
-        -av|--appversion)
-            testParameter $1 $2
-            APPVERSION="$2"
-            shift
-        ;;
-        --pofiles)
-            testParameter $1 $2
-            APP_POFILES="$APP_POFILES $2"
-            shift
-        ;;
-        --nodoc)
-            GETDOC="no"
-        ;;
-        --noi18n)
-            GETI18N="no"
-        ;;
-        --split)
-            SPLIT="yes"
-        ;;
-        --notoplevel)
-            TOPLEVEL="no"
-        ;;
-        --package)
-            PKGTYPE="$2"
-            if [ "$PKGTYPE" = "gzip" ] || [ "$PKGTYPE" = "bzip2" ]
-            then
-                shift
-                PACKAGE="$PKGTYPE"
-            else
-                PACKAGE="yes"
-            fi
-        ;;
-        --packagedir)
-            testParameter $1 $2
-            TARBALLDIR=$2
-            shift
-        ;;
-        --postprocess)
-            testParameter $1 $2
-            POSTPROCESSSCRIPT=$2
-            shift
-        ;;
-        -l|--languages)
-            testParameter $1 $2
-            LANGUAGES="$LANGUAGES $2"
-            shift
-        ;;
-        -el|--exclude-languages)
-            testParameter $1 $2
-            EXCLUDELANGUAGES="$EXCLUDELANGUAGES $2"
-            shift
-        ;;
-        --logfile)
-            testParameter $1 $2
-            if [ "$2" = "no" ]
-            then
-                LOGFILE=""
-            else
-                if [ "`echo $2 | cut -c1`" = "/" ]
-                then
-                    LOGFILE=$2
-                else
-                    LOGFILE=$PWD/$2
-                fi
-            fi
-            shift
-        ;;
-        -h|--help)
-            showHelp
-            exit 0
-        ;;
-        -v|--version)
-            showVersion
-            exit 0
-        ;;
-        *)
-            echo "Invalid parameter $1"
-            exit 1
-        ;;
-    esac
-    # process the next parameter
-    shift
-done
-
-initBasic
-
-# Create the builddir, the place where the package will be assembled.
-# If no builddir is specified is specified "./$APPNAME-build" is used.
-setupBuildDir
-
-assembleApplicationData
-retrieveDocumentation
-
-retrieveGUITranslations
-retrieveDocTranslations
-createTranslationMakefiles
-createTranslationDirMakefile $BUILDDIR/$TRANSDIR
-
-postProcessApplicationDir
-
-packageApplication
-packageTranslations
-
-# vim: set et ts=4 sts=4:

src/dist/quick_tarball.sh

@@ -1,2 +0,0 @@
-export UNSERMAKE=no
-./createPackage.sh -ab trunk/extragear/office -a kile --noi18n --admin branches/KDE/3.5/kde-common/admin -av 1.9 --package

src/kile.lsm

@@ -1,14 +0,0 @@
-Begin4
-Title:          Kile
-Version:        R14.0.0
-Description:    Graphical LaTeX editor
-Keywords:       TDE Qt
-Author:         Thomas Braun, Michel Ludwig, Holger Danielsson
-                Jeroen Wijnhout, Pascal Brachet
-Maintained-by:  The Trinity Desktop Environment (TDE) http://www.trinitydesktop.org/
-Primary-site:   http://git.trinitydesktop.org/cgit/
-Alternate-site:
-Original-site:  http://kile.sourceforge.net
-Platforms:      Linux and other Unices running TDE
-Copying-policy: GPL
-End

src/kile/CMakeL10n.txt

@@ -0,0 +1,6 @@
+##### create translation templates ##############
+
+tde_l10n_create_template(
+    CATALOG "messages/kile"
+    SOURCES "." "tips"
+)

src/kile/CMakeLists.txt

@@ -1,162 +1,163 @@
-ADD_SUBDIRECTORY( icons )
-ADD_SUBDIRECTORY( pics )
-ADD_SUBDIRECTORY( symbols )
-ADD_SUBDIRECTORY( templates )
-ADD_SUBDIRECTORY( syntax )
-ADD_SUBDIRECTORY( complete )
-ADD_SUBDIRECTORY( help )
-ADD_SUBDIRECTORY( encodings )
-ADD_SUBDIRECTORY( test )
-
-INCLUDE( KDE3Macros )
-INCLUDE( FindPerl )
-
-INCLUDE_DIRECTORIES( ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR} ${KDE3_INCLUDE_DIR} ${QT_INCLUDE_DIR}  )
-
-########### next target ###############
-
-
-# taken from KDE4's KJS CMakeLists.txt file
-
-SET(CREATE_HASH_TABLE ${CMAKE_CURRENT_SOURCE_DIR}/create_hash_table )
-
-MACRO(CREATE_LUT _srcs_LIST _in_FILE _out_FILE _dep_FILE)
-	ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${_out_FILE}
-		COMMAND ${PERL_EXECUTABLE} ${CREATE_HASH_TABLE} ${CMAKE_CURRENT_SOURCE_DIR}/${_in_FILE} > ${CMAKE_CURRENT_BINARY_DIR}/${_out_FILE}
-		DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${_in_FILE} )
-	SET( ${_srcs_LIST}  ${${_srcs_LIST}} ${CMAKE_CURRENT_BINARY_DIR}/${_out_FILE})
-ENDMACRO(CREATE_LUT)
-
-CREATE_LUT(kile_SRCS kilejscript.cpp kilejscript.lut.h kilejscript.cpp)
-
-SET(kile_SRCS
-	${kile_SRCS}
-	latexcmd.cpp
-	latexcmddialog.cpp
-	texdocdialog.cpp
-	userhelp.cpp
-	userhelpdialog.cpp
-	floatdialog.cpp
-	mathenvdialog.cpp
-	tabulardialog.cpp
-	postscriptdialog.cpp
-	previewconfigwidget.cpp
-	quickpreview.cpp
-	includegraphicsdialog.cpp
-	newfilewizard.cpp
-	managetemplatesdialog.cpp
-	templates.cpp
-	usermenudialog.cpp
-	kileconfigdialog.cpp
-	tabbingdialog.cpp
-	symbolview.cpp
-	quickdocumentdialog.cpp
-	kilefileselect.cpp
-	kileapplication.cpp
-	docpart.cpp
-	kile.cpp
-	main.cpp
-	kileactions.cpp
-	kilestdactions.cpp
-	kileinfo.cpp
-	kiledocumentinfo.cpp
-	kileproject.cpp
-	kileprojectdlgs.cpp
-	kileprojectview.cpp
-	kilelistselector.cpp
-	kilelyxserver.cpp
-	latexoutputfilter.cpp
-	outputinfo.cpp
-	latexoutputinfo.cpp
-	outputfilter.cpp
-	kilegrepdialog.cpp
-	kiletool.cpp
-	kilelauncher.cpp
-	kiletoolmanager.cpp
-	kilestdtools.cpp
-	kilelogwidget.cpp
-	kileoutputwidget.cpp
-	kilekonsolewidget.cpp
-	kilewizard.cpp
-	kilestructurewidget.cpp
-	codecompletion.cpp
-	configcodecompletion.cpp
-	kiletoolconfigwidget.cpp
-	kileedit.cpp
-	cleandialog.cpp
-	kilehelp.cpp
-	configstructure.cpp
-	convert.cpp
-	kiledocmanager.cpp
-	kileviewmanager.cpp
-	kileeventfilter.cpp
-	kileerrorhandler.cpp
-	configcheckerdlg.cpp
-	configtester.cpp
-	kilesidebar.cpp
-	plaintolatexconverter.cpp
-	kileuntitled.cpp
-	kilestatsdlg.cpp
-	kilestatswidget.cpp
-	previewwidget.cpp
-	kilejscript.h
-	kilejscript.cpp
-	scriptsmanagementwidget.h
-	scriptsmanagementwidget.cpp
-	editorkeysequencemanager.h
-	editorkeysequencemanager.cpp
-	kileversion.cpp
-	kileabbrevview.cpp
-	kileextensions.cpp
-	kilemultitabbar.cpp
-)
 
-KDE3_AUTOMOC(${kile_SRCS})
-
-SET( kile_UI
-	helpconfigwidget.ui
-	latexconfigwidget.ui
-	generalconfigwidget.ui
-	configcheckerwidget.ui
-	toolconfigwidget.ui
-	librarytoolconfigwidget.ui
-	processtoolconfigwidget.ui
-	quicktoolconfigwidget.ui
-	latextoolconfigwidget.ui
-	newtoolwizard.ui
-	envconfigwidget.ui
-	structureconfigwidget.ui
-	symbolviewconfig.ui
-	scriptingconfigwidget.ui
-	graphicsconfigwidget.ui
-	newdocumentwidget.ui
+add_subdirectory( icons )
+add_subdirectory( pics )
+add_subdirectory( symbols )
+add_subdirectory( templates )
+add_subdirectory( syntax )
+add_subdirectory( complete )
+add_subdirectory( help )
+add_subdirectory( encodings )
+add_subdirectory( test )
+
+
+include_directories(
+  ${CMAKE_BINARY_DIR}
+  ${CMAKE_CURRENT_BINARY_DIR}
+  ${CMAKE_CURRENT_SOURCE_DIR}
+  ${TDE_INCLUDE_DIR}
+  ${TQT_INCLUDE_DIRS}
 )
 
-KDE3_ADD_UI_FILES(kile_SRCS ${kile_UI} )
-
-SET( kile_DCOP_SKEL_SRCS
-	kileappIface.h
+link_directories(
+  ${TQT_LIBRARY_DIRS}
+  ${TDE_LIB_DIR}
 )
 
-KDE3_ADD_DCOP_SKELS(kile_SRCS ${kile_DCOP_SKEL_SRCS})
 
-SET( kile_KCFG_SRCS
-	kileconfig.kcfgc
+#####
+
+set( _target ${PROJECT_NAME} )
+
+set( ${_target}_SRCS
+    latexcmd.cpp
+    latexcmddialog.cpp
+    texdocdialog.cpp
+    userhelp.cpp
+    userhelpdialog.cpp
+    floatdialog.cpp
+    mathenvdialog.cpp
+    tabulardialog.cpp
+    postscriptdialog.cpp
+    previewconfigwidget.cpp
+    quickpreview.cpp
+    includegraphicsdialog.cpp
+    newfilewizard.cpp
+    managetemplatesdialog.cpp
+    templates.cpp
+    usermenudialog.cpp
+    kileconfigdialog.cpp
+    tabbingdialog.cpp
+    symbolview.cpp
+    quickdocumentdialog.cpp
+    kilefileselect.cpp
+    kileapplication.cpp
+    docpart.cpp
+    kile.cpp
+    main.cpp
+    kileactions.cpp
+    kilestdactions.cpp
+    kileinfo.cpp
+    kiledocumentinfo.cpp
+    kileproject.cpp
+    kileprojectdlgs.cpp
+    kileprojectview.cpp
+    kilelistselector.cpp
+    kilelyxserver.cpp
+    latexoutputfilter.cpp
+    outputinfo.cpp
+    latexoutputinfo.cpp
+    outputfilter.cpp
+    kilegrepdialog.cpp
+    kiletool.cpp
+    kilelauncher.cpp
+    kiletoolmanager.cpp
+    kilestdtools.cpp
+    kilelogwidget.cpp
+    kileoutputwidget.cpp
+    kilekonsolewidget.cpp
+    kilewizard.cpp
+    kilestructurewidget.cpp
+    codecompletion.cpp
+    configcodecompletion.cpp
+    kiletoolconfigwidget.cpp
+    kileedit.cpp
+    cleandialog.cpp
+    kilehelp.cpp
+    configstructure.cpp
+    convert.cpp
+    kiledocmanager.cpp
+    kileviewmanager.cpp
+    kileeventfilter.cpp
+    kileerrorhandler.cpp
+    configcheckerdlg.cpp
+    configtester.cpp
+    kilesidebar.cpp
+    plaintolatexconverter.cpp
+    kileuntitled.cpp
+    kilestatsdlg.cpp
+    kilestatswidget.cpp
+    previewwidget.cpp
+    kilejscript.cpp
+    scriptsmanagementwidget.cpp
+    editorkeysequencemanager.cpp
+    kileversion.cpp
+    kileabbrevview.cpp
+    kileextensions.cpp
+    kilemultitabbar.cpp
+
+    helpconfigwidget.ui
+    latexconfigwidget.ui
+    generalconfigwidget.ui
+    configcheckerwidget.ui
+    toolconfigwidget.ui
+    librarytoolconfigwidget.ui
+    processtoolconfigwidget.ui
+    quicktoolconfigwidget.ui
+    latextoolconfigwidget.ui
+    newtoolwizard.ui
+    envconfigwidget.ui
+    structureconfigwidget.ui
+    symbolviewconfig.ui
+    scriptingconfigwidget.ui
+    graphicsconfigwidget.ui
+    newdocumentwidget.ui
+
+    kileappIface.skel
+
+    kileconfig.kcfgc
 )
 
-KDE3_ADD_KCFG_FILES(kile_SRCS ${kile_KCFG_SRCS})
-
-KDE3_ADD_EXECUTABLE(kile ${kile_SRCS})
+add_custom_command( OUTPUT kilejscript.lut.h
+  COMMAND ${PERL_EXECUTABLE} ARGS ${CMAKE_CURRENT_SOURCE_DIR}/create_hash_table
+    ${CMAKE_CURRENT_SOURCE_DIR}/kilejscript.cpp > kilejscript.lut.h
+  DEPENDS kilejscript.cpp
+)
+set_property( SOURCE kilejscript.cpp APPEND PROPERTY
+  OBJECT_DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/kilejscript.lut.h
+)
 
-TARGET_LINK_LIBRARIES(kile ${QT_AND_TDECORE_LIBS} kjs tdeprint tdetexteditor katepartinterfaces tdehtml )
+tde_add_executable( ${_target} AUTOMOC
+  SOURCES
+        ${${_target}_SRCS}
+  LINK
+     tdecore-shared
+     tdehtml-shared
+     tdeprint-shared
+     tdetexteditor-shared
+     katepartinterfaces-shared
+     kjs-shared
+
+  DESTINATION ${BIN_INSTALL_DIR}
+)
 
-INSTALL( TARGETS kile DESTINATION bin )
 
+##### other data
 
-########### install files ###############
+tde_create_translated_desktop( kile.desktop )
 
-INSTALL( FILES kile.desktop DESTINATION share/applications/tde )
-INSTALL( FILES kile.kcfg DESTINATION share/config.kcfg )
-INSTALL( FILES kileui.rc docpartui.rc kilestdtools.rc tips DESTINATION share/apps/kile )
+install( FILES kile.kcfg DESTINATION ${KCFG_INSTALL_DIR} )
 
-KDE3_INSTALL_ICONS( hicolor )
+install(
+  FILES kileui.rc docpartui.rc kilestdtools.rc tips
+  DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}
+)

src/kile/Makefile.am

@@ -1,116 +0,0 @@
-####### tdevelop will overwrite this part!!! (begin)##########
-bin_PROGRAMS = kile
-
-## INCLUDES were found outside tdevelop specific part
-
-
-kile_SOURCES = latexcmd.cpp latexcmddialog.cpp texdocdialog.cpp userhelp.cpp \
-	userhelpdialog.cpp floatdialog.cpp mathenvdialog.cpp tabulardialog.cpp \
-	postscriptdialog.cpp previewconfigwidget.cpp quickpreview.cpp includegraphicsdialog.cpp \
-	newfilewizard.cpp managetemplatesdialog.cpp templates.cpp usermenudialog.cpp \
-	kileconfigdialog.cpp tabbingdialog.cpp symbolview.cpp quickdocumentdialog.cpp \
-	kilefileselect.cpp kileapplication.cpp docpart.cpp kile.cpp main.cpp kileactions.cpp \
-	kilestdactions.cpp kileinfo.cpp kiledocumentinfo.cpp kileproject.cpp kileprojectdlgs.cpp \
-	kileprojectview.cpp kilelistselector.cpp kilelyxserver.cpp latexoutputfilter.cpp \
-	outputinfo.cpp latexoutputinfo.cpp outputfilter.cpp kilegrepdialog.cpp kiletool.cpp \
-	kilelauncher.cpp kiletoolmanager.cpp kilestdtools.cpp kilelogwidget.cpp \
-	kileoutputwidget.cpp kilekonsolewidget.cpp kilewizard.cpp kilestructurewidget.cpp \
-	codecompletion.cpp configcodecompletion.cpp kiletoolconfigwidget.cpp kileedit.cpp \
-	cleandialog.cpp kilehelp.cpp configstructure.cpp kileappIface.skel convert.cpp \
-	helpconfigwidget.ui kiledocmanager.cpp kileviewmanager.cpp kileeventfilter.cpp \
-	latexconfigwidget.ui kileconfig.kcfgc generalconfigwidget.ui kileerrorhandler.cpp \
-	configcheckerdlg.cpp configcheckerwidget.ui configtester.cpp kilesidebar.cpp \
-	toolconfigwidget.ui librarytoolconfigwidget.ui processtoolconfigwidget.ui \
-	quicktoolconfigwidget.ui plaintolatexconverter.cpp latextoolconfigwidget.ui newtoolwizard.ui \
-	kileuntitled.cpp kilestatsdlg.cpp kilestatswidget.cpp envconfigwidget.ui \
-	structureconfigwidget.ui previewwidget.cpp kilejscript.h kilejscript.cpp \
-	scriptsmanagementwidget.h scriptsmanagementwidget.cpp editorkeysequencemanager.h \
-	editorkeysequencemanager.cpp scriptingconfigwidget.ui kileabbrevview.cpp kileextensions.cpp \
-	kileversion.cpp graphicsconfigwidget.ui kilemultitabbar.cpp newdocumentwidget.ui\
-	symbolviewconfig.ui
-
-kile_LDADD   = -lkjs -ltdeprint -ltdetexteditor -lkatepartinterfaces $(LIB_TDESPELL) $(LIB_TDEHTML) 
-
-SUBDIRS = icons pics symbols templates syntax complete help encodings test
-
-EXTRA_DIST = main.cpp kile.cpp kile.h \
-	docpart.cpp docpart.h kileappIface.h kileapplication.cpp kileapplication.h kile.desktop kilefileselect.cpp 	kilefileselect.h kileui.rc docpartui.rc tdemultiverttabbar.cpp tdemultiverttabbar.h letterdialog.cpp letterdialog.h quickdocumentdialog.cpp quickdocumentdialog.h symbolview.cpp symbolview.h tabbingdialog.cpp tabbingdialog.h \
-	kileconfigdialog.cpp kileconfigdialog.h usermenudialog.cpp \
-	usermenudialog.h kileabbrevview.cpp kileabbrevview.h \
-	newfilewizard.cpp newfilewizard.h templates.cpp templates.h managetemplatesdialog.cpp \
-	managetemplatesdialog.h kileinfo.h kileinfo.cpp kilestdactions.cpp \
-	kilestdactions.h kileproject.h kileproject.cpp kileprojectdlgs.cpp \
-	kileprojectdlgs.h kileprojectview.cpp kileprojectview.h \
-	kilelistselector.cpp kilelistselector.h kilelyxserver.cpp kilelyxserver.h \
-	latexoutputfilter.cpp outputinfo.cpp latexoutputinfo.cpp \
-	outputfilter.cpp latexoutputfilter.h outputinfo.h latexoutputinfo.h \
-	includegraphicsdialog.h includegraphicsdialog.cpp kiletoolconfigwidget.cpp kiletoolconfigwidget.h outputfilter.h kilegrepdialog.cpp kilegrepdialog.h codecompletion.h codecompletion.cpp configcodecompletion.cpp configcodecompletion.h kileedit.cpp cleandialog.cpp kileedit.h cleandialog.h  kilehelp.cpp kilehelp.h configstructure.cpp configstructure.h configenvironment.h convert.h convert.cpp \
-	kileconstants.h kilejscript.h kilejscript.cpp scriptsmanagementwidget.h scriptsmanagementwidget.cpp editorkeysequencemanager.h editorkeysequencemanager.cpp kilemultitabbar.cpp kilemultitabbar.h  kilemultitabbar_p.h
-
-xdg_apps_DATA = kile.desktop
-
-kde_kcfg_DATA = kile.kcfg
-
-KDE_ICON = AUTO
-
-####### tdevelop will overwrite this part!!! (end)############
-# These paths are KDE specific. Use them:
-# kde_appsdir         Where your application's menu entry (.desktop) should go to.
-# kde_icondir         Where your icon should go to - better use KDE_ICON.
-# kde_sounddir        Where your sounds should go to.
-# kde_htmldir         Where your docs should go to. (contains lang subdirs)
-# kde_datadir         Where you install application data. (Use a subdir)
-# kde_locale          Where translation files should go to. (contains lang subdirs)
-# kde_cgidir          Where cgi-bin executables should go to.
-# kde_confdir         Where config files should go to (system-wide ones with default values).
-# kde_mimedir         Where mimetypes .desktop files should go to.
-# kde_servicesdir     Where services .desktop files should go to.
-# kde_servicetypesdir Where servicetypes .desktop files should go to.
-# kde_toolbardir      Where general toolbar icons should go to (deprecated, use KDE_ICON).
-# kde_wallpaperdir    Where general wallpapers should go to.
-# kde_templatesdir    Where templates for the "New" menu (Konqueror/KDesktop) should go to.
-# kde_bindir          Where executables should go to. Use bin_PROGRAMS or bin_SCRIPTS.
-# kde_libdir          Where shared libraries should go to. Use lib_LTLIBRARIES.
-# kde_moduledir       Where modules (e.g. parts) should go to. Use kde_module_LTLIBRARIES.
-# kde_styledir        Where Qt/KDE widget styles should go to (new in KDE 3).
-# kde_designerdir     Where Qt Designer plugins should go to (new in KDE 3).
-
-# set the include path for X, qt and KDE
-INCLUDES = $(all_includes)
-
-METASOURCES = AUTO
-
-# the library search path.
-kile_LDFLAGS = $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor $(LIB_TDEPARTS)
-
-rcdir = $(kde_datadir)/kile
-rc_DATA = kileui.rc docpartui.rc kilestdtools.rc tips
-
-messages: rc.cpp
-	$(PREPARETIPS) > tips.txt
-	LIST=`find . -name \*.h -o -name \*.txt -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
-	if test -n "$$LIST"; then \
-	 $(XGETTEXT) $$LIST -o $(podir)/kile.pot; \
-	fi
-	rm -f tips.txt
-
-syntaxdir = $(kde_appsdir)/katepart/syntax
-noinst_HEADERS = 	kilestatsdlg.h configcheckerdlg.h configtester.h convert.h \
-	envconfigwidget.h kileconstants.h kiledebug.h kiledocmanager.h kileerrorhandler.h \
-	kileeventfilter.h kilekonsolewidget.h kilelauncher.h kilelogwidget.h kilemultitabbar.h \
-	kilemultitabbar_p.h kileoutputwidget.h kilesidebar.h kilestatswidget.h kilestdtools.h \
-	kilestructurewidget.h kiletool.h kiletool_enums.h kiletoolmanager.h kileuntitled.h \
-	kileversion.h kileviewmanager.h kilewizard.h latexconfigwidget.h \
-	plaintolatexconverter.h structureconfigwidget.h
-
-CREATE_HASH_TABLE = $(srcdir)/create_hash_table
-
-kilejscript.lut.h : $(srcdir)/kilejscript.cpp $(CREATE_HASH_TABLE)
-	$(PERL) $(CREATE_HASH_TABLE) $(srcdir)/kilejscript.cpp > $@
-kilejscript.lo: kilejscript.lut.h
-
-kilejscript.o: kilejscript.lut.h
-
-LUT_FILES = kilejscript.lut.h
-
-CLEANFILES = $(LUT_FILES)

src/kile/complete/CMakeLists.txt

@@ -1,3 +1,14 @@
-ADD_SUBDIRECTORY( abbreviation )
-ADD_SUBDIRECTORY( tex )
-ADD_SUBDIRECTORY( dictionary )
+
+file( GLOB _completions RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} * )
+list( SORT _completions )
+
+foreach( _completion IN LISTS _completions )
+  if( IS_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${_completion} )
+    file( GLOB _files ${_completion}/*.cwl )
+    list( SORT _files )
+    install(
+      FILES ${_files}
+      DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/complete/${_completion}
+    )
+  endif()
+endforeach()

src/kile/complete/Makefile.am

@@ -1 +0,0 @@
-SUBDIRS=abbreviation tex dictionary

src/kile/complete/abbreviation/CMakeLists.txt

@@ -1,7 +0,0 @@
-
-########### install files ###############
-
-INSTALL( FILES
-	example.cwl
-	fastex.cwl
-	DESTINATION share/apps/kile/complete/abbreviation )

src/kile/complete/abbreviation/Makefile.am

@@ -1,3 +0,0 @@
-abbcompletedir = $(kde_datadir)/kile/complete/abbreviation
-abbcomplete_DATA = example.cwl \
-		   fastex.cwl

src/kile/complete/dictionary/CMakeLists.txt

@@ -1,4 +0,0 @@
-
-########### install files ###############
-
-INSTALL( FILES example.cwl metapost.cwl DESTINATION share/apps/kile/complete/dictionary )

src/kile/complete/dictionary/Makefile.am

@@ -1,2 +0,0 @@
-dictcompletedir = $(kde_datadir)/kile/complete/dictionary
-dictcomplete_DATA = example.cwl metapost.cwl

src/kile/complete/tex/CMakeLists.txt

@@ -1,109 +0,0 @@
-
-########### install files ###############
-# get this cwl list with "for i in `ls *.cwl -1`; do echo "$i";  done"
-SET(kile_texCompleteFiles
-	acronym.cwl
-	allrunes.cwl
-	amsopn.cwl
-	afterpage.cwl
-	amsbsy.cwl
-	amsfonts.cwl
-	amsmath.cwl
-	amssymb.cwl
-	amsthm.cwl
-	array.cwl
-	attachfile.cwl
-	babel.cwl
-	beamerfoils.cwl
-	beamerprosper.cwl
-	beamerseminar.cwl
-	beamertexpower.cwl
-	booktabs.cwl
-	bm.cwl
-	braket.cwl
-	calc.cwl
-	class-beamer.cwl
-	class-letter.cwl
-	class-scrartcl,scrreprt,scrbook.cwl
-	class-scrlttr2.cwl
-	color.cwl
-	colortbl.cwl
-	coordsys.cwl
-	currvita.cwl
-	cyrillic.cwl
-	diagxy.cwl
-	doi.cwl
-	enumerate.cwl
-	fancybox.cwl
-	fancyhdr.cwl
-	fancyunits-base.cwl
-	fancyunits_big-fractions.cwl
-	fancyunits_medium-fractions.cwl
-	fancyunits-np.cwl
-	fancyunits-per.cwl
-	fancyunits_small-fractions.cwl
-	fancyvrb.cwl
-	float.cwl
-	fontspec.cwl
-	graphicx.cwl
-	glosstex.cwl
-	hyperref.cwl
-	ifthen.cwl
-	import.cwl
-	jurabib.cwl
-	latex-209.cwl
-	latex-dev.cwl
-	latex-document.cwl
-	latex-l2tabu.cwl
-	latex-mathsymbols.cwl
-	layout.cwl
-	listings.cwl
-	logsys.cwl
-	longtable.cwl
-	lscape.cwl
-	manyfoot.cwl
-	mdwlist.cwl
-	multicol.cwl
-	multido.cwl
-	nicefrac.sty
-	pdfpages.cwl
-	psfrag.cwl
-	pst-3d.cwl
-	pst-blur.cwl
-	pst-char.cwl
-	pst-coil.cwl
-	pst-eps.cwl
-	pst-fill.cwl
-	pst-node.cwl
-	pst-plot.cwl
-	pstricks.cwl
-	pst-text.cwl
-	pst-tree.cwl
-	rotating.cwl
-	scraddr.cwl
-	scrdate.cwl
-	scrlfile.cwl
-	scrpage2.cwl
-	scrtime.cwl
-	setspace.cwl
-	siunitx.cwl
-	siunitx-special.cwl
-	subfig.cwl
-	supertabular.cwl
-	svninfo.cwl
-	svn-multi.cwl
-	tabularx.cwl
-	tex.cwl
-	textcomp.cwl
-	todonotes.cwl
-	url.cwl
-	varioref.cwl
-	verse.cwl
-	virginialake.cwl
-	xifthen.cwl
-	xltxtra.cwl
-	xtab.cwl
-	yfonts.cwl
-)
-
-INSTALL( FILES ${kile_texCompleteFiles} DESTINATION share/apps/kile/complete/tex )

src/kile/complete/tex/Makefile.am

@@ -1,104 +0,0 @@
-texcompletedir = $(kde_datadir)/kile/complete/tex
-texcomplete_DATA = \
-	acronym.cwl \
-	afterpage.cwl \
-	allrunes.cwl \
-	amsbsy.cwl \
-	amsfonts.cwl \
-	amsmath.cwl \
-	amsopn.cwl \
-	amssymb.cwl \
-	amsthm.cwl \
-	array.cwl \
-	attachfile.cwl \
-	babel.cwl \
-	beamerfoils.cwl \
-	beamerprosper.cwl \
-	beamerseminar.cwl \
-	beamertexpower.cwl \
-	booktabs.cwl \
-	bm.cwl \
-	braket.cwl \
-	calc.cwl \
-	class-beamer.cwl \
-	class-letter.cwl \
-	class-scrartcl,scrreprt,scrbook.cwl \
-	class-scrlttr2.cwl \
-	color.cwl \
-	colortbl.cwl \
-	coordsys.cwl \
-	currvita.cwl \
-	cyrillic.cwl \
-	diagxy.cwl \
-	doi.cwl \
-	enumerate.cwl \
-	fancybox.cwl \
-	fancyhdr.cwl \
-	fancyunits-base.cwl \
-	fancyunits_big-fractions.cwl \
-	fancyunits_medium-fractions.cwl \
-	fancyunits-np.cwl \
-	fancyunits-per.cwl \
-	fancyunits_small-fractions.cwl \
-	fancyvrb.cwl \
-	float.cwl \
-	fontspec.cwl \
-	glosstex.cwl \
-	graphicx.cwl \
-	hyperref.cwl \
-	ifthen.cwl \
-	import.cwl \
-	jurabib.cwl \
-	latex-209.cwl \
-	latex-dev.cwl \
-	latex-document.cwl \
-	latex-l2tabu.cwl \
-	latex-mathsymbols.cwl \
-	layout.cwl \
-	listings.cwl \
-	logsys.cwl \
-	longtable.cwl \
-	lscape.cwl \
-	manyfoot.cwl \
-	mdwlist.cwl \
-	multicol.cwl \
-	multido.cwl \
-	nicefrac.cwl \
-	pdfpages.cwl \
-	psfrag.cwl \
-	pst-3d.cwl \
-	pst-blur.cwl \
-	pst-char.cwl \
-	pst-coil.cwl \
-	pst-eps.cwl \
-	pst-fill.cwl \
-	pst-node.cwl \
-	pst-plot.cwl \
-	pstricks.cwl \
-	pst-text.cwl \
-	pst-tree.cwl \
-	rotating.cwl \
-	scraddr.cwl \
-	scrdate.cwl \
-	scrlfile.cwl \
-	scrpage2.cwl \
-	scrtime.cwl \
-	setspace.cwl \
-	siunitx.cwl \
-	siunitx-special.cwl \
-	subfig.cwl \
-	supertabular.cwl \
-	svninfo.cwl \
-	svn-multi.cwl \
-	tabularx.cwl \
-	tex.cwl \
-	textcomp.cwl \
-	todonotes.cwl \
-	url.cwl \
-	varioref.cwl \
-	verse.cwl \
-	virginialake.cwl \
-	xifthen.cwl \
-	xltxtra.cwl \
-	xtab.cwl \
-	yfonts.cwl 

src/kile/configcheckerwidget.ui

@@ -96,17 +96,15 @@
         </widget>
     </vbox>
 </widget>
-<includes>
-    <include location="local" impldecl="in implementation">configcheckerwidget.ui.h</include>
-</includes>
 <functions>
     <function specifier="non virtual" returnType="KProgress *">progressBar()</function>
     <function specifier="non virtual" returnType="TQLabel *">label()</function>
     <function specifier="non virtual" returnType="TDEListBox *">listBox()</function>
 </functions>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>kprogress.h</includehint>
-    <includehint>tdelistbox.h</includehint>
-</includehints>
+<includes>
+    <include location="global" impldecl="in implementation">kprogress.h</include>
+    <include location="global" impldecl="in implementation">tdelistbox.h</include>
+    <include location="local"  impldecl="in implementation">configcheckerwidget.ui.h</include>
+</includes>
 </UI>

src/kile/encodings/CMakeLists.txt

@@ -1,4 +1,10 @@
 
 ########### install files ###############
 
-INSTALL( FILES latin1.enc latin2.enc latin3.enc latin4.enc latin5.enc latin9.enc cp1250.enc cp1252.enc DESTINATION share/apps/kile/encodings )
+file( GLOB _files *.enc )
+list( SORT _files )
+
+install(
+  FILES ${_files}
+  DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/encodings
+)

src/kile/encodings/Makefile.am

@@ -1,3 +0,0 @@
-encodingsdir = $(kde_datadir)/kile/encodings
-encodings_DATA = latin1.enc latin2.enc latin3.enc latin4.enc latin5.enc latin9.enc cp1250.enc cp1252.enc
-

src/kile/generalconfigwidget.ui

@@ -240,12 +240,8 @@
     </vbox>
 </widget>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>knuminput.h</includehint>
-    <includehint>knuminput.h</includehint>
-    <includehint>klineedit.h</includehint>
-    <includehint>klineedit.h</includehint>
-    <includehint>klineedit.h</includehint>
-    <includehint>klineedit.h</includehint>
-</includehints>
+<includes>
+    <include location="global" impldecl="in implementation">klineedit.h</include>
+    <include location="global" impldecl="in implementation">knuminput.h</include>
+</includes>
 </UI>

src/kile/graphicsconfigwidget.ui

@@ -113,8 +113,9 @@
 </customwidgets>
 <includes>
     <include location="global" impldecl="in declaration">tdeconfig.h</include>
-    <include location="local" impldecl="in declaration">latexcmd.h</include>
-    <include location="local" impldecl="in declaration">latexcmddialog.h</include>
+    <include location="global" impldecl="in implementation">klineedit.h</include>
+    <include location="local"  impldecl="in declaration">latexcmd.h</include>
+    <include location="local"  impldecl="in declaration">latexcmddialog.h</include>
 </includes>
 <variables>
     <variable access="private">TDEConfig *m_config;</variable>
@@ -128,7 +129,4 @@
     <function specifier="non virtual">setLatexCommands( TDEConfig * config, KileDocument::LatexCommands * commands )</function>
 </functions>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>klineedit.h</includehint>
-</includehints>
 </UI>

src/kile/help/CMakeLists.txt

@@ -1,4 +1,10 @@
 
 ########### install files ###############
 
-INSTALL( FILES latex-kile.lst latex-tetex.lst latex-tetex3.lst latex-texlive-3.9.lst DESTINATION share/apps/kile/help )
+file( GLOB _files *.lst )
+list( SORT _files )
+
+install(
+  FILES ${_files}
+  DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/help
+)

src/kile/help/Makefile.am

@@ -1,3 +0,0 @@
-helpdir = $(kde_datadir)/kile/help
-help_DATA = latex-kile.lst latex-tetex.lst latex-tetex3.lst latex-texlive-3.9.lst
-

src/kile/helpconfigwidget.ui

@@ -156,8 +156,9 @@
     </connection>
 </connections>
 <includes>
-    <include location="local" impldecl="in implementation">kilehelp.h</include>
-    <include location="local" impldecl="in implementation">helpconfigwidget.ui.h</include>
+    <include location="global" impldecl="in implementation">klineedit.h</include>
+    <include location="local"  impldecl="in implementation">helpconfigwidget.ui.h</include>
+    <include location="local"  impldecl="in implementation">kilehelp.h</include>
 </includes>
 <forwards>
     <forward>namespace KileHelp { class Help; } class avoid_compile_error</forward>
@@ -172,7 +173,4 @@
     <function specifier="non virtual">setHelp( KileHelp::Help * help )</function>
 </functions>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>klineedit.h</includehint>
-</includehints>
 </UI>

src/kile/icons/CMakeLists.txt

@@ -1,11 +1,4 @@
-ADD_SUBDIRECTORY( actions )
 
-INCLUDE_DIRECTORIES( ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR} ${KDE3_INCLUDE_DIR} ${QT_INCLUDE_DIR}  )
-
-INCLUDE(KDE3Macros)
-
-########### install files ###############
-
-
-KDE3_INSTALL_ICONS( hicolor )
+add_subdirectory( actions )
 
+tde_install_icons( )

src/kile/icons/Makefile.am

@@ -1,2 +0,0 @@
-SUBDIRS=actions
-KDE_ICON = AUTO

src/kile/icons/actions/CMakeLists.txt

@@ -1,11 +1,4 @@
-INCLUDE(KDE3Macros)
 
 ########### install files ###############
 
-
-KDE3_INSTALL_ICONS( hicolor )
-
-#original Makefile.am contents follow:
-
-#kileiconsdir = $(kde_datadir)/kile/icons
-#kileicons_ICON = AUTO
+tde_install_icons( DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/icons )

src/kile/icons/actions/Makefile.am

@@ -1,2 +0,0 @@
-kileiconsdir = $(kde_datadir)/kile/icons
-kileicons_ICON = AUTO

src/kile/kile.desktop

@@ -1,81 +1,15 @@
 [Desktop Entry]
+Name=Kile
+
+GenericName=LaTeX Frontend
+
+Comment=(La)TeX development environment
+
+Encoding=UTF-8
 Type=Application
 Exec=kile
 Icon=kile
-X-DocPath=kile/index.html
-Comment=(La)TeX development environment
-Comment[be]=Асяроддзе распрацоўкі (La)TeX
-Comment[bg]=Графичен интерфейс на (La)TeX
-Comment[bs]=(La)TeX razvojno okruženje
-Comment[ca]=Entorn de desenvolupament (La)TeX
-Comment[cs]=Vývojové prostředí pro (La)TeX
-Comment[da]=(La)TeX udviklingsmiljø
-Comment[de]=(La)TeX-Entwicklungsumgebung
-Comment[el]=Περιβάλλον ανάπτυξης (La)TeX
-Comment[es]=Entorno de desarrollo de (La)TeX
-Comment[et]=(La)TeXi arenduskeskkond
-Comment[fi]=(La)TeX-kehitysympäristö
-Comment[fr]=Environnement de développement pour (La)TeX
-Comment[ga]=Timpeallacht fhorbartha (La)TeX
-Comment[gl]=O editor de (La)TeX
-Comment[hi]=(ले)टेक्स डेवलपमेंट वातावरण
-Comment[hu]=(La)TeX fejlesztőkörnyezet
-Comment[it]=Ambiente di sviluppo (La)TeX
-Comment[ja]=(La)TeX 開発環境
-Comment[ms]=Persekitaran pembangunan (La)TeX
-Comment[nds]=(La)TeX-Dokmentensmeed
-Comment[nl]=(La)TeX-ontwikkelingsomgeving
-Comment[pa]=(La)TeX ਵਿਕਾਸ ਵਾਤਾਵਰਣ
-Comment[pt]=Ambiente de desenvolvimento de (La)TeX
-Comment[pt_BR]=Ambiente de Desenvolvimento (La)TeX
-Comment[sk]=(La)TeX vývojové prostredie
-Comment[sr]=Развојно окружење за (La)TeX
-Comment[sr@Latn]=Razvojno okruženje za (La)TeX
-Comment[sv]=(La)tex-utvecklingsmiljö
-Comment[ta]=(லா)டெக்ஸ் மேம்பாட்டு சூழல்
-Comment[tr]=(La)TeX geliştirme ortamı
-Comment[uk]=Середовище розробки (La)TeX
-Comment[xx]=xx(La)TeX development environmentxx
-Comment[zh_CN]=(La)TeX 开发环境
 Terminal=false
-Name=Kile
-Name[hi]=काइल
-Name[ta]=கயில்
-Name[xx]=xxKilexx
-GenericName=LaTeX Frontend
-GenericName[be]=Інтэрфейс да LaTeX
-GenericName[bg]=Интерфейс за LaTeX
-GenericName[bs]=LaTeX frontend
-GenericName[ca]=Frontal per a LaTeX
-GenericName[cs]=Prostředí pro LaTeX
-GenericName[da]=Forende for LaTeX
-GenericName[de]=Graphische Oberfläche zu LaTeX
-GenericName[el]=Σύστημα υποστήριξης χρήστη LaTeX
-GenericName[es]=Interfaz para LaTeX
-GenericName[et]=LaTeXi kasutajaliides
-GenericName[fr]=Interface graphique LaTeX
-GenericName[ga]=Comhéadan LaTeX
-GenericName[gl]=Interface para LaTeX
-GenericName[hi]=लेटेक्स फ्रंटएण्ड
-GenericName[hu]=LaTeX-felület
-GenericName[it]=Interfaccia LaTeX
-GenericName[ja]=LaTeX フロントエンド
-GenericName[ms]=Frontend LaTeX
-GenericName[nds]=LaTeX-Böversiet
-GenericName[nl]=LaTeX-tekstverwerking
-GenericName[pa]=LaTeX ਮੁੱਖ
-GenericName[pt]=Interface para o LaTeX
-GenericName[pt_BR]=Interface do LaTeX
-GenericName[ru]=Интерфейс к LaTeX
-GenericName[sk]=LaTeX rozhranie
-GenericName[sr]=Интерфејс за LaTeX
-GenericName[sr@Latn]=Interfejs za LaTeX
-GenericName[sv]=Latex-gränssnitt
-GenericName[ta]=(லா)டெக்ஸ்  
-GenericName[tr]=LaTeX Arayüzü
-GenericName[uk]=Інтерфейс до LaTeX
-GenericName[xx]=xxLaTeX Frontendxx
-GenericName[zh_CN]=LaTeX 前端
 MimeType=text/x-tex;text/x-kilepr;
 Categories=Qt;TDE;Office;
-Encoding=UTF-8
+X-DocPath=kile/index.html

src/kile/kileprojectview.h

@@ -25,7 +25,9 @@
 class KURL;
 class TDEPopupMenu;
 class TDEToggleAction;
-class KileDocument::Info;
+namespace KileDocument {
+    class Info;
+}
 class KileInfo;
 
 namespace KileType {enum ProjectView { Project=0, ProjectItem, ProjectExtra, File, Folder};}

src/kile/kilestdactions.cpp

@@ -91,7 +91,7 @@ void setupStdTags(KileInfo *ki, TDEMainWindow *parent)
 	(void) new KileAction::Tag(i18n("Newpage - \\newpage"),  0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), parent->actionCollection(),"tag_newpage","\\newpage ",TQString(),9,0,i18n("The \\newpage command ends the current page"));
 	(void) new KileAction::Tag(i18n("Line Break - \\linebreak"),0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), parent->actionCollection(),"tag_linebreak","\\linebreak ",TQString(),11,0,i18n("The \\linebreak command tells LaTeX to break the current line at the point of the command."));
 	(void) new KileAction::Tag(i18n("Page Break - \\pagebreak"),0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), parent->actionCollection(),"tag_pagebreak","\\pagebreak ",TQString(),11,0,i18n("The \\pagebreak command tells LaTeX to break the current page at the point of the command."));
-	(void) new KileAction::Tag(i18n("\"Big\"Qt::Vertical Space - \\bigskip"),  0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), parent->actionCollection(),"tag_bigskip","\\bigskip ",TQString(),9,0,i18n("The \\bigskip command adds a 'big' vertical space."));
+	(void) new KileAction::Tag(i18n("\"Big\" Vertical Space - \\bigskip"),  0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), parent->actionCollection(),"tag_bigskip","\\bigskip ",TQString(),9,0,i18n("The \\bigskip command adds a 'big' vertical space."));
 	(void) new KileAction::Tag(i18n("\"Medium\" vertical Space - \\medskip"),  0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), parent->actionCollection(),"tag_medskip","\\medskip ",TQString(),9,0,i18n("The \\medskip command adds a 'medium' vertical space."));
 
   // includegraphics (dani)
@@ -178,7 +178,7 @@ void setupStdTags(KileInfo *ki, TDEMainWindow *parent)
 	(void) new KileAction::Tag(i18n("Embedded Code (show spaces) - \\verb*||"),0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)),ac,"tag_verb*","\\verb*|","|",7,0, i18n("Macro form of the verbatim* environment."));
 
 	// horizontal/vertical space
-	(void) new KileAction::Tag(i18n("\"Small\"Qt::Vertical Space - \\smallskip"),0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), ac,"tag_smallskip","\\smallskip ",TQString(),10,0, i18n("The \\smallskip command adds a 'small' vertical space."));
+	(void) new KileAction::Tag(i18n("\"Small\" Vertical Space - \\smallskip"),0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), ac,"tag_smallskip","\\smallskip ",TQString(),10,0, i18n("The \\smallskip command adds a 'small' vertical space."));
 
 	(void) new KileAction::Tag("\\enskip",0, TQT_TQOBJECT(parent), TQT_SLOT(insertTag(const KileAction::TagData&)), ac,"tag_enskip", "\\enskip ", TQString(), 8);
 

src/kile/latexconfigwidget.ui

@@ -144,9 +144,6 @@
                     <property name="text">
                         <string>Auto insert $</string>
                     </property>
-                    <property name="accel">
-                        <string></string>
-                    </property>
                 </widget>
             </vbox>
         </widget>
@@ -234,9 +231,10 @@
 </connections>
 <includes>
     <include location="global" impldecl="in declaration">tdeconfig.h</include>
-    <include location="local" impldecl="in declaration">latexcmd.h</include>
-    <include location="local" impldecl="in declaration">latexcmddialog.h</include>
-    <include location="local" impldecl="in implementation">latexconfigwidget.ui.h</include>
+    <include location="global" impldecl="in implementation">klineedit.h</include>
+    <include location="local"  impldecl="in declaration">latexcmd.h</include>
+    <include location="local"  impldecl="in declaration">latexcmddialog.h</include>
+    <include location="local"  impldecl="in implementation">latexconfigwidget.ui.h</include>
 </includes>
 <variables>
     <variable access="private">TDEConfig *m_config;</variable>
@@ -250,9 +248,4 @@
     <function specifier="non virtual">setLatexCommands( TDEConfig * config, KileDocument::LatexCommands * commands )</function>
 </functions>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>klineedit.h</includehint>
-    <includehint>klineedit.h</includehint>
-    <includehint>klineedit.h</includehint>
-</includehints>
 </UI>

src/kile/newtoolwizard.ui

@@ -161,12 +161,14 @@ the standard "LaTeX" tool.</string>
     <tabstop>m_cbTools</tabstop>
 </tabstops>
 <includes>
-    <include location="global" impldecl="in implementation">tqstringlist.h</include>
-    <include location="global" impldecl="in implementation">tqregexp.h</include>
+    <include location="global" impldecl="in implementation">kcombobox.h</include>
+    <include location="global" impldecl="in implementation">klineedit.h</include>
     <include location="global" impldecl="in implementation">tdeglobal.h</include>
-    <include location="local" impldecl="in implementation">kiletoolmanager.h</include>
     <include location="global" impldecl="in implementation">tdelocale.h</include>
-    <include location="local" impldecl="in implementation">newtoolwizard.ui.h</include>
+    <include location="global" impldecl="in implementation">tqregexp.h</include>
+    <include location="global" impldecl="in implementation">tqstringlist.h</include>
+    <include location="local"  impldecl="in implementation">kiletoolmanager.h</include>
+    <include location="local"  impldecl="in implementation">newtoolwizard.ui.h</include>
 </includes>
 <variables>
     <variable access="private">TQStringList m_toolList;</variable>
@@ -182,8 +184,4 @@ the standard "LaTeX" tool.</string>
     <function returnType="TQString">parentTool()</function>
 </functions>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>klineedit.h</includehint>
-    <includehint>kcombobox.h</includehint>
-</includehints>
 </UI>

src/kile/pics/CMakeLists.txt

@@ -1,4 +1,10 @@
 
 ########### install files ###############
 
-INSTALL( FILES type_Book.tex.kileicon type_Letter.tex.kileicon type_Scrartcl.tex.kileicon kile_splash_base.png type_Default.png type_Project.png type_Scrbook.tex.kileicon kile_splash.png type_Article.tex.kileicon type_Empty.png type_Prosper.tex.kileicon type_Scrlttr2.tex.kileicon type_Beamer.tex.kileicon type_HA-prosper.tex.kileicon type_Report.tex.kileicon type_Scrreprt.tex.kileicon DESTINATION share/apps/kile/pics )
+file( GLOB _pics *.png *.kileicon )
+list( SORT _pics )
+
+install(
+  FILES ${_pics}
+  DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/pics
+)

src/kile/pics/Makefile.am

@@ -1,2 +0,0 @@
-picsdir = $(kde_datadir)/kile/pics
-pics_DATA=kile_splash.png type_Article.tex.kileicon type_Book.tex.kileicon type_Default.png type_Empty.png type_Letter.tex.kileicon type_Project.png type_Report.tex.kileicon type_Beamer.tex.kileicon type_Scrartcl.tex.kileicon type_Scrreprt.tex.kileicon type_HA-prosper.tex.kileicon type_Scrbook.tex.kileicon type_Prosper.tex.kileicon type_Scrlttr2.tex.kileicon

src/kile/scriptingconfigwidget.ui

@@ -208,12 +208,9 @@
         <slot>setEnabled(bool)</slot>
     </connection>
 </connections>
+<layoutdefaults spacing="6" margin="11"/>
 <includes>
-    <include location="local" impldecl="in implementation">scriptingconfigwidget.ui.h</include>
+    <include location="global" impldecl="in implementation">knuminput.h</include>
+    <include location="local"  impldecl="in implementation">scriptingconfigwidget.ui.h</include>
 </includes>
-<layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>knuminput.h</includehint>
-    <includehint>knuminput.h</includehint>
-</includehints>
 </UI>

src/kile/structureconfigwidget.ui

@@ -181,9 +181,6 @@
                 <property name="text">
                     <string>No extra section for labels</string>
                 </property>
-                <property name="accel">
-                    <string></string>
-                </property>
             </widget>
             <widget class="TQCheckBox">
                 <property name="name">
@@ -200,9 +197,6 @@
                 <property name="text">
                     <string>Show input files</string>
                 </property>
-                <property name="accel">
-                    <string></string>
-                </property>
             </widget>
             <widget class="TQCheckBox">
                 <property name="name">
@@ -338,8 +332,7 @@
 <customwidgets>
 </customwidgets>
 <layoutdefaults spacing="6" margin="11"/>
-<includehints>
-    <includehint>knuminput.h</includehint>
-    <includehint>knuminput.h</includehint>
-</includehints>
+<includes>
+    <include location="global" impldecl="in implementation">knuminput.h</include>
+</includes>
 </UI>

src/kile/symbols/CMakeLists.txt

@@ -1,48 +1,40 @@
-# FILE( GLOB_RECURSE _allFiles * )
-# FOREACH( _file ${_allFiles} )
-# # MESSAGE(STATUS "checking ${_file}")
-# 	IF( IS_DIRECTORY _file )
-# MESSAGE(STATUS "Installing dir ${_file$}")
-# 		INSTALL( DIRECTORY _file DESTINATION share/apps/kile/mathsymbols
-# 		         PATTERN ".svn" EXCLUDE
-# 		         PATTERN "Makefile.am" EXCLUDE)
-# 	ENDIF( IS_DIRECTORY _file )
-# ENDFOREACH( _file )
-
-SET(kile_symbolSubdirs
-	arrows
-	cyrillic
-	delimiters
-	greek
-	misc-math
-	misc-text
-	operators
-	relation
-	special
-)
 
-# for the future:
-# INSTALL( DIRECTORY ${kile_symbolSubdirs} DESTINATION share/apps/kile/mathsymbols
-# 		PATTERN ".svn" EXCLUDE
-# 		PATTERN "Makefile.am" EXCLUDE)
+##### install files
+
+file( GLOB _symbols RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} * )
+list( SORT _symbols )
+
+foreach( _symbol IN LISTS _symbols )
+  if( IS_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${_symbol} )
+    file( GLOB _files ${_symbol}/*.png )
+    list( SORT _files )
+    install(
+      FILES ${_files}
+      DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/mathsymbols/${_symbol}
+    )
+  endif()
+endforeach()
 
-FOREACH( _dir ${kile_symbolSubdirs} )
-	ADD_SUBDIRECTORY( ${_dir} )
-ENDFOREACH( _dir )
 
 ########### next target ###############
 
-INCLUDE_DIRECTORIES( ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_BINARY_DIR} ${KDE3_INCLUDE_DIR} ${QT_INCLUDE_DIR}  )
-INCLUDE( FindKDE3 )
-SET(gesymb_SRCS
-	gesymb.cpp
-	gesymb.h
+include_directories(
+  ${CMAKE_BINARY_DIR}
+  ${CMAKE_CURRENT_BINARY_DIR}
+  ${CMAKE_CURRENT_SOURCE_DIR}
+  ${TDE_INCLUDE_DIR}
+  ${TQT_INCLUDE_DIRS}
 )
-KDE3_AUTOMOC(${gesymb_SRCS})
-ADD_EXECUTABLE(gesymb EXCLUDE_FROM_ALL ${gesymb_SRCS} )
-TARGET_LINK_LIBRARIES(gesymb ${QT_AND_TDECORE_LIBS} )
 
-
-########### install files ###############
+link_directories(
+  ${TQT_LIBRARY_DIRS}
+  ${TDE_LIB_DIR}
+)
 
 
+tde_add_executable( gesymb AUTOMOC
+  SOURCES
+      gesymb.cpp
+  LINK
+    ${TQT_LIBRARIES}
+)

src/kile/symbols/Makefile.am

@@ -1,7 +0,0 @@
-INCLUDES = $(all_includes)
-
-gesymb_LDFLAGS = $(all_libraries) $(KDE_RPATH) $(LIB_QT)
-noinst_PROGRAMS = gesymb
-gesymb_SOURCES = gesymb.cpp gesymb.h
-
-SUBDIRS = $(AUTODIRS)

src/kile/symbols/arrows/CMakeLists.txt

@@ -1,77 +0,0 @@
-
-SET(symbols
-	img001arrows.png
-	img002arrows.png
-	img003arrows.png
-	img004arrows.png
-	img005arrows.png
-	img006arrows.png
-	img007arrows.png
-	img008arrows.png
-	img009arrows.png
-	img010arrows.png
-	img011arrows.png
-	img012arrows.png
-	img013arrows.png
-	img014arrows.png
-	img015arrows.png
-	img016arrows.png
-	img017arrows.png
-	img018arrows.png
-	img019arrows.png
-	img020arrows.png
-	img021arrows.png
-	img022arrows.png
-	img023arrows.png
-	img024arrows.png
-	img025arrows.png
-	img026arrows.png
-	img027arrows.png
-	img028arrows.png
-	img029arrows.png
-	img030arrows.png
-	img031arrows.png
-	img032arrows.png
-	img033arrows.png
-	img034arrows.png
-	img035arrows.png
-	img036arrows.png
-	img037arrows.png
-	img038arrows.png
-	img039arrows.png
-	img040arrows.png
-	img041arrows.png
-	img042arrows.png
-	img043arrows.png
-	img044arrows.png
-	img045arrows.png
-	img046arrows.png
-	img047arrows.png
-	img048arrows.png
-	img049arrows.png
-	img050arrows.png
-	img051arrows.png
-	img052arrows.png
-	img053arrows.png
-	img054arrows.png
-	img055arrows.png
-	img056arrows.png
-	img057arrows.png
-	img058arrows.png
-	img059arrows.png
-	img060arrows.png
-	img061arrows.png
-	img062arrows.png
-	img063arrows.png
-	img064arrows.png
-	img065arrows.png
-	img066arrows.png
-	img067arrows.png
-	img068arrows.png
-	img069arrows.png
-)
-
-########### install files ###############
-
-INSTALL( FILES ${symbols} DESTINATION share/apps/kile/mathsymbols/arrows )
-

src/kile/symbols/arrows/Makefile.am

@@ -1,71 +0,0 @@
-picsdir = $(kde_datadir)/kile/mathsymbols/arrows
-
-pics_DATA = img001arrows.png \
-	img002arrows.png \
-	img003arrows.png \
-	img004arrows.png \
-	img005arrows.png \
-	img006arrows.png \
-	img007arrows.png \
-	img008arrows.png \
-	img009arrows.png \
-	img010arrows.png \
-	img011arrows.png \
-	img012arrows.png \
-	img013arrows.png \
-	img014arrows.png \
-	img015arrows.png \
-	img016arrows.png \
-	img017arrows.png \
-	img018arrows.png \
-	img019arrows.png \
-	img020arrows.png \
-	img021arrows.png \
-	img022arrows.png \
-	img023arrows.png \
-	img024arrows.png \
-	img025arrows.png \
-	img026arrows.png \
-	img027arrows.png \
-	img028arrows.png \
-	img029arrows.png \
-	img030arrows.png \
-	img031arrows.png \
-	img032arrows.png \
-	img033arrows.png \
-	img034arrows.png \
-	img035arrows.png \
-	img036arrows.png \
-	img037arrows.png \
-	img038arrows.png \
-	img039arrows.png \
-	img040arrows.png \
-	img041arrows.png \
-	img042arrows.png \
-	img043arrows.png \
-	img044arrows.png \
-	img045arrows.png \
-	img046arrows.png \
-	img047arrows.png \
-	img048arrows.png \
-	img049arrows.png \
-	img050arrows.png \
-	img051arrows.png \
-	img052arrows.png \
-	img053arrows.png \
-	img054arrows.png \
-	img055arrows.png \
-	img056arrows.png \
-	img057arrows.png \
-	img058arrows.png \
-	img059arrows.png \
-	img060arrows.png \
-	img061arrows.png \
-	img062arrows.png \
-	img063arrows.png \
-	img064arrows.png \
-	img065arrows.png \
-	img066arrows.png \
-	img067arrows.png \
-	img068arrows.png \
-	img069arrows.png