Drop automake build support.

Add basic cmake build instructions.
Deleted files INSTALL.Mandrake and knemo.spec.
Rework of the README file.
COPYING-DOCS, NEWS and VERSION moved to the root of the source.

Signed-off-by: gregory guy <gregory-tde@laposte.net>
(cherry picked from commit b118a9c9a6)
r14.0.x
gregory guy 4 years ago committed by Michele Calgaro
parent 4fe1352411
commit fc4af1b5bd
Signed by: MicheleC
GPG Key ID: 2A75B7CA8ADED5CF

3
.gitmodules vendored

@ -1,6 +1,3 @@
[submodule "admin"]
path = admin
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin
[submodule "cmake"]
path = cmake
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake

@ -1,181 +1,29 @@
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
knemo relies on cmake to build.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
Here are suggested default options:
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
-DCMAKE_INSTALL_PREFIX="/opt/trinity" \
-DCONFIG_INSTALL_DIR="/etc/trinity" \
-DSYSCONF_INSTALL_DIR="/etc" \
-DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON" \
-DWITH_ALL_OPTIONS="ON"
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Requirements:
=============
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
- net-tools (ifconfig)
- wireless-tools (iwconfig)
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.
Optional:
=========
- libiw

@ -1,5 +0,0 @@
AUTOMAKE_OPTIONS = foreign 1.6.1
include admin/deps.am
include admin/Doxyfile.am
SUBDIRS=$(TOPSUBDIRS)

@ -1,4 +0,0 @@
AUTOMAKE_OPTIONS = foreign 1.6.1
include admin/deps.am
include admin/Doxyfile.am

26
NEWS

@ -0,0 +1,26 @@
Features of version 0.4.5 include:
* support for ethernet (including wireless) and ppp connections
* the icon shows incoming/outgoing traffic
* hiding of icon when the interface is not available
* hiding of icon when the interface does not exist (useful for interfaces that
are dynamically created and and removed)
* automatic detection of wireless extensions for ethernet interfaces
* left-clicking on an icon displays a status dialog with information about the
selected interface (2nd click hides dialog)
* middle-clicking on an icon displays a traffic plotter that was taken from
KSysGuard (2nd click hides dialog)
* configuration via context menu or control center module (Internet & Network/
Network Monitor)
* customizable tooltip for quick access to often needed information
* custom entries in the context menu. Useful to start/stop/restart interfaces
or to configure them using external tools.
* automatic detection of available interfaces (click on 'Default' in the
configuration dialog and KNemo will look under /proc/net/dev for interfaces)
* support for notifications via sound and passive popups
* KNemo counts the number of transfered bytes and does not depend on the output
of 'ifconfig' for the total number of transfered bytes. This way KNemo can
even display a hugh amount of traffic while 'ifconfig' has an overflow at 4GB.
* support for different iconsets for every interface
* support for daily, monthly and yearly statistics
* configurable update interval for interface informations
* support for different backends to gather information

@ -1,36 +1,31 @@
KNemo - the KDE Network Monitor
KNemo - a network monitor for TDE.
KNemo offers a network monitor similar to the one found in Windows.
For every network interface it displays an icon in the systray.
For every network interface it displays an icon in the systray.
Tooltips and an info dialog provide further information about the
interface. Passive popups inform about interface changes.
A traffic plotter is also integrated.
knemo polls the network interface status every second using the
ifconfig, route and iwconfig tools.
IMPORTANT: KNemo has to be started using Trinity Control Center/Internet & Network/
Network Monitor. Please do no longer use the KDE Service Manager to start and
stop KNemo. This change was necessary to keep KNemo from starting automatically
for every user in a multiuser environment.
Features of version 0.4.5 include:
* support for ethernet (including wireless) and ppp connections
* the icon shows incoming/outgoing traffic
* hiding of icon when the interface is not available
* hiding of icon when the interface does not exist (useful for interfaces that
are dynamically created and and removed)
* automatic detection of wireless extensions for ethernet interfaces
* left-clicking on an icon displays a status dialog with information about the
selected interface (2nd click hides dialog)
* middle-clicking on an icon displays a traffic plotter that was taken from
KSysGuard (2nd click hides dialog)
* configuration via context menu or control center module (Internet & Network/
Network Monitor)
* customizable tooltip for quick access to often needed information
* custom entries in the context menu. Useful to start/stop/restart interfaces
or to configure them using external tools.
* automatic detection of available interfaces (click on 'Default' in the
configuration dialog and KNemo will look under /proc/net/dev for interfaces)
* support for notifications via sound and passive popups
* KNemo counts the number of transfered bytes and does not depend on the output
of 'ifconfig' for the total number of transfered bytes. This way KNemo can
even display a hugh amount of traffic while 'ifconfig' has an overflow at 4GB.
* support for different iconsets for every interface
* support for daily, monthly and yearly statistics
* configurable update interval for interface informations
* support for different backends to gather information
IMPORTANT: KNemo has to be started using
Trinity Control Center/Internet & Network/Network Monitor.
Please do no longer use the KDE Service Manager to start and to stop
KNemo. This change was necessary to keep KNemo from starting
automatically for every user in a multiuser environment.
CONTRIBUTING
==============
If you wish to contribute to knemo, you might do so:
- TDE Gitea Workspace (TGW) collaboration tool.
https://mirror.git.trinitydesktop.org/gitea
- TDE Weblate Translation Workspace (TWTW) collaboration tool.
https://mirror.git.trinitydesktop.org/weblate

File diff suppressed because it is too large Load Diff

863
aclocal.m4 vendored

@ -1,863 +0,0 @@
# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.9.6])])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 7
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
#serial 3
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 12
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
[define([AC_PROG_CC],
defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$1 | $1:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
am__include=include
am__quote=
_am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
am__include=.include
am__quote="\""
_am_result=BSD
fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
AC_MSG_WARN([`missing' script is too old or missing])
fi
])
# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_MKDIR_P
# ---------------
# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
#
# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
# created by `make install' are always world readable, even if the
# installer happens to have an overly restrictive umask (e.g. 077).
# This was a mistake. There are at least two reasons why we must not
# use `-m 0755':
# - it causes special bits like SGID to be ignored,
# - it may be too restrictive (some setups expect 775 directories).
#
# Do not use -m 0755 and let people choose whatever they expect by
# setting umask.
#
# We cannot accept any implementation of `mkdir' that recognizes `-p'.
# Some implementations (such as Solaris 8's) are not thread-safe: if a
# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
# concurrently, both version can detect that a/ is missing, but only
# one can create it and the other will error out. Consequently we
# restrict ourselves to GNU make (using the --version option ensures
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
# We used to keeping the `.' as first argument, in order to
# allow $(mkdir_p) to be used without argument. As in
# $(mkdir_p) $(somedir)
# where $(somedir) is conditionally defined. However this is wrong
# for two reasons:
# 1. if the package is installed by a user who cannot write `.'
# make install will fail,
# 2. the above comment should most certainly read
# $(mkdir_p) $(DESTDIR)$(somedir)
# so it does not work when $(somedir) is undefined and
# $(DESTDIR) is not.
# To support the latter case, we have to write
# test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
# so the `.' trick is pointless.
mkdir_p='mkdir -p --'
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
# directories to create, and then abort because `.' already
# exists.
for d in ./-p ./--version;
do
test -d $d && rmdir $d
done
# $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
if test -f "$ac_aux_dir/mkinstalldirs"; then
mkdir_p='$(mkinstalldirs)'
else
mkdir_p='$(install_sh) -d'
fi
fi
AC_SUBST([mkdir_p])])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
[am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
m4_include([acinclude.m4])

@ -1 +0,0 @@
Subproject commit 3013c1e653e37c03ef987eb4efd1ebb68a64ad33

@ -1,282 +0,0 @@
/* config.h.in. Generated from configure.in by autoheader. */
/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
#undef HAVE_CARBON_CARBON_H
/* Define if you have the CoreAudio API */
#undef HAVE_COREAUDIO
/* Define to 1 if you have the <crt_externs.h> header file. */
#undef HAVE_CRT_EXTERNS_H
/* Defines if your system has the crypt function */
#undef HAVE_CRYPT
/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
*/
#undef HAVE_DIRENT_H
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the `iw' library (-liw). */
#undef HAVE_LIBIW
/* Define if you have libjpeg */
#undef HAVE_LIBJPEG
/* Define if you have libpng */
#undef HAVE_LIBPNG
/* Define if you have a working libpthread (will enable threaded code) */
#undef HAVE_LIBPTHREAD
/* Define if you have libz */
#undef HAVE_LIBZ
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
#undef HAVE_NDIR_H
/* Define if your system needs _NSGetEnviron to set up the environment */
#undef HAVE_NSGETENVIRON
/* Define to 1 if you have the <paths.h> header file. */
#undef HAVE_PATHS_H
/* Define if you have res_init */
#undef HAVE_RES_INIT
/* Define if you have the res_init prototype */
#undef HAVE_RES_INIT_PROTO
/* Define if you have a STL implementation by SGI */
#undef HAVE_SGI_STL
/* Define to 1 if you have the `snprintf' function. */
#undef HAVE_SNPRINTF
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define if you have strlcat */
#undef HAVE_STRLCAT
/* Define if you have the strlcat prototype */
#undef HAVE_STRLCAT_PROTO
/* Define if you have strlcpy */
#undef HAVE_STRLCPY
/* Define if you have the strlcpy prototype */
#undef HAVE_STRLCPY_PROTO
/* Define to 1 if you have the <sys/bitypes.h> header file. */
#undef HAVE_SYS_BITYPES_H
/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
*/
#undef HAVE_SYS_DIR_H
/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
*/
#undef HAVE_SYS_NDIR_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/time.h> header file. */
#undef HAVE_SYS_TIME_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the `usleep' function. */
#undef HAVE_USLEEP
/* Define to 1 if you have the `vsnprintf' function. */
#undef HAVE_VSNPRINTF
/* Suffix for lib directories */
#undef KDELIBSUFF
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Path of ifconfig program */
#undef PATH_IFCONFIG
/* Path of iwconfig program */
#undef PATH_IWCONFIG
/* Path of route program */
#undef PATH_ROUTE
/* The size of `char *', as computed by sizeof. */
#undef SIZEOF_CHAR_P
/* The size of `int', as computed by sizeof. */
#undef SIZEOF_INT
/* The size of `long', as computed by sizeof. */
#undef SIZEOF_LONG
/* The size of `short', as computed by sizeof. */
#undef SIZEOF_SHORT
/* The size of `size_t', as computed by sizeof. */
#undef SIZEOF_SIZE_T
/* The size of `unsigned long', as computed by sizeof. */
#undef SIZEOF_UNSIGNED_LONG
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
#undef TIME_WITH_SYS_TIME
/* If we use arts volume */
#undef USE_ARTS
/* Version number of package */
#undef VERSION
/* Defined if compiling without arts */
#undef WITHOUT_ARTS
/*
* jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
* headers and I'm too lazy to write a configure test as long as only
* unixware is related
*/
#ifdef _UNIXWARE
#define HAVE_BOOLEAN
#endif
/*
* AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
* that defines bzero.
*/
#if defined(_AIX)
#include <strings.h>
#endif
#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
# include <sys/time.h>
# include <crt_externs.h>
# define environ (*_NSGetEnviron())
#endif
#if !defined(HAVE_RES_INIT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
int res_init(void);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCAT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcat(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCPY_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcpy(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
/*
* On HP-UX, the declaration of vsnprintf() is needed every time !
*/
#if !defined(HAVE_VSNPRINTF) || defined(hpux)
#if __STDC__
#include <stdarg.h>
#include <stdlib.h>
#else
#include <varargs.h>
#endif
#ifdef __cplusplus
extern "C"
#endif
int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
#ifdef __cplusplus
extern "C"
#endif
int snprintf(char *str, size_t n, char const *fmt, ...);
#endif
#if defined(__SVR4) && !defined(__svr4__)
#define __svr4__ 1
#endif
/* type to use in place of socklen_t if not defined */
#undef kde_socklen_t
/* type to use in place of socklen_t if not defined (deprecated, use
kde_socklen_t) */
#undef ksize_t

@ -1,5 +0,0 @@
./admin/configure.in.min
configure.in.in
./src/configure.in.bot
./src/configure.in.in
configure.in.bot

@ -1,270 +0,0 @@
dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(knemo-0.4.8, "3.5.7") dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.2)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.2)
CXXFLAGS="$CXXFLAGS $KDE_DEFAULT_CXXFLAGS"
if test "$build_arts" = "yes"; then
AC_DEFINE(USE_ARTS, 1, [If we use arts volume])
LIB_ARTS="-lartskde"
AC_SUBST(LIB_ARTS)
fi
KDE_INIT_DOXYGEN([KEG Network API Reference], [Version $VERSION])
dnl =======================================================
dnl FILE: ./src/configure.in.in
dnl =======================================================
dnl PACKAGE set before
dnl These are common macros that you might or might not want to use
dnl Image readers/writers
dnl If you want to use this test, you have to define it somewhere
dnl KDE_CHECK_KIMGIO
dnl Checks for header files.
AC_HEADER_DIRENT
AC_HEADER_STDC
AC_HEADER_TIME
AC_CHECK_HEADERS(fcntl.h sys/time.h unistd.h stdlib.h paths.h)
AC_CHECK_FUNCS(usleep)
AC_CHECK_LIB(iw,iw_sockets_open)
dnl Check path to ifconfig, iwconfig and route.
AC_PATH_PROG([PATH_IFCONFIG],[ifconfig],,
[$PATH:/sbin:/usr/sbin:/usr/local/sbin])
AC_PATH_PROG([PATH_IWCONFIG],[iwconfig],,
[$PATH:/sbin:/usr/sbin:/usr/local/sbin])
AC_PATH_PROG([PATH_ROUTE],[route],,
[$PATH:/sbin:/usr/sbin:/usr/local/sbin])
if test -n "${PATH_IFCONFIG}"; then
AC_SUBST([PATH_IFCONFIG])
AC_DEFINE_UNQUOTED(PATH_IFCONFIG, "${PATH_IFCONFIG}", [Path of ifconfig program])
fi
if test -n "${PATH_IWCONFIG}"; then
AC_SUBST([PATH_IWCONFIG])
AC_DEFINE_UNQUOTED(PATH_IWCONFIG, "${PATH_IWCONFIG}", [Path of iwconfig program])
fi
if test -n "${PATH_ROUTE}"; then
AC_SUBST([PATH_ROUTE])
AC_DEFINE_UNQUOTED(PATH_ROUTE, "${PATH_ROUTE}", [Path of route program])
fi
KDE_CREATE_SUBDIRSLIST
AM_CONDITIONAL(src_SUBDIR_included, test "x$src_SUBDIR_included" = xyes)
AM_CONDITIONAL(translations_SUBDIR_included, test "x$translations_SUBDIR_included" = xyes)
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_CONFIG_FILES([ src/kcm/Makefile ])
AC_CONFIG_FILES([ src/knemod/Makefile ])
AC_CONFIG_FILES([ src/knemod/backends/Makefile ])
AC_CONFIG_FILES([ src/knemod/pics/Makefile ])
AC_CONFIG_FILES([ translations/Makefile ])
AC_CONFIG_FILES([ translations/ar/Makefile ])
AC_CONFIG_FILES([ translations/ar/messages/Makefile ])
AC_CONFIG_FILES([ translations/bg/Makefile ])
AC_CONFIG_FILES([ translations/bg/messages/Makefile ])
AC_CONFIG_FILES([ translations/br/Makefile ])
AC_CONFIG_FILES([ translations/br/messages/Makefile ])
AC_CONFIG_FILES([ translations/cs/Makefile ])
AC_CONFIG_FILES([ translations/cs/messages/Makefile ])
AC_CONFIG_FILES([ translations/cy/Makefile ])
AC_CONFIG_FILES([ translations/cy/messages/Makefile ])
AC_CONFIG_FILES([ translations/da/Makefile ])
AC_CONFIG_FILES([ translations/da/messages/Makefile ])
AC_CONFIG_FILES([ translations/de/Makefile ])
AC_CONFIG_FILES([ translations/de/messages/Makefile ])
AC_CONFIG_FILES([ translations/el/Makefile ])
AC_CONFIG_FILES([ translations/el/messages/Makefile ])
AC_CONFIG_FILES([ translations/en_GB/Makefile ])
AC_CONFIG_FILES([ translations/en_GB/messages/Makefile ])
AC_CONFIG_FILES([ translations/es/Makefile ])
AC_CONFIG_FILES([ translations/es/messages/Makefile ])
AC_CONFIG_FILES([ translations/et/Makefile ])
AC_CONFIG_FILES([ translations/et/messages/Makefile ])
AC_CONFIG_FILES([ translations/fr/Makefile ])
AC_CONFIG_FILES([ translations/fr/messages/Makefile ])
AC_CONFIG_FILES([ translations/ga/Makefile ])
AC_CONFIG_FILES([ translations/ga/messages/Makefile ])
AC_CONFIG_FILES([ translations/gl/Makefile ])
AC_CONFIG_FILES([ translations/gl/messages/Makefile ])
AC_CONFIG_FILES([ translations/hu/Makefile ])
AC_CONFIG_FILES([ translations/hu/messages/Makefile ])
AC_CONFIG_FILES([ translations/it/Makefile ])
AC_CONFIG_FILES([ translations/it/messages/Makefile ])
AC_CONFIG_FILES([ translations/ja/Makefile ])
AC_CONFIG_FILES([ translations/ja/messages/Makefile ])
AC_CONFIG_FILES([ translations/ka/Makefile ])
AC_CONFIG_FILES([ translations/ka/messages/Makefile ])
AC_CONFIG_FILES([ translations/lt/Makefile ])
AC_CONFIG_FILES([ translations/lt/messages/Makefile ])
AC_CONFIG_FILES([ translations/nl/Makefile ])
AC_CONFIG_FILES([ translations/nl/messages/Makefile ])
AC_CONFIG_FILES([ translations/pl/Makefile ])
AC_CONFIG_FILES([ translations/pl/messages/Makefile ])
AC_CONFIG_FILES([ translations/pt/Makefile ])
AC_CONFIG_FILES([ translations/pt/messages/Makefile ])
AC_CONFIG_FILES([ translations/pt_BR/Makefile ])
AC_CONFIG_FILES([ translations/pt_BR/messages/Makefile ])
AC_CONFIG_FILES([ translations/ru/Makefile ])
AC_CONFIG_FILES([ translations/ru/messages/Makefile ])
AC_CONFIG_FILES([ translations/rw/Makefile ])
AC_CONFIG_FILES([ translations/rw/messages/Makefile ])
AC_CONFIG_FILES([ translations/sk/Makefile ])
AC_CONFIG_FILES([ translations/sk/messages/Makefile ])
AC_CONFIG_FILES([ translations/sr/Makefile ])
AC_CONFIG_FILES([ translations/sr/messages/Makefile ])
AC_CONFIG_FILES([ translations/sr@Latn/Makefile ])
AC_CONFIG_FILES([ translations/sr@Latn/messages/Makefile ])
AC_CONFIG_FILES([ translations/sv/Makefile ])
AC_CONFIG_FILES([ translations/sv/messages/Makefile ])
AC_CONFIG_FILES([ translations/tr/Makefile ])
AC_CONFIG_FILES([ translations/tr/messages/Makefile ])
AC_OUTPUT
dnl put here things which have to be done as very last part of configure
if test -z "$PATH_IFCONFIG"; then
echo ""
echo "You're missing the program 'ifconfig'."
echo "KNemo won't be able to run without it so please install 'ifconfig'"
echo "which is normally part of a package called 'net-tools' or similar"
echo "and run configure again."
echo ""
all_tests=bad
fi
if test -z "$PATH_IWCONFIG"; then
echo ""
echo "You're missing the program 'iwconfig'."
echo "KNemo works without 'iwconfig' being installed but you won't be able"
echo "to monitor the wireless extensions of wireless interfaces."
echo "If you would like to have these additional features install"
echo "'iwconfig' which can be found in a package called 'wireless-tools'"
echo "or similar and run configure again."
echo ""
fi
if test -z "$PATH_ROUTE"; then
echo ""
echo "You're missing the program 'route'."
echo "KNemo works without 'route' being installed but KNemo won't be able"
echo "to display the default gateway of an interface."
echo "If you would like to have this additional feature install"
echo "'route' which can be found in a package called 'net-tools'"
echo "or similar and run configure again."
echo ""
fi
dnl Put here things to be done at the very end - telling users
dnl about additional packages to install. Better yet is giving
dnl each project / subdr its own configure.in.bot.
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
echo ""
echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
echo "was not included. Therefore, GCC symbol visibility support remains disabled."
echo ""
echo "For better performance, consider including the Qt visibility supporting patch"
echo "located at:"
echo ""
echo "http://bugs.kde.org/show_bug.cgi?id=109386"
echo ""
echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
echo "everything will continue to work just fine without it."
echo ""
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi

@ -1,4 +0,0 @@
dnl Put here things to be done at the very end - telling users
dnl about additional packages to install. Better yet is giving
dnl each project / subdr its own configure.in.bot.

@ -1,12 +0,0 @@
#MIN_CONFIG(3.2)
KDE_ENABLE_HIDDEN_VISIBILITY
CXXFLAGS="$CXXFLAGS $KDE_DEFAULT_CXXFLAGS"
if test "$build_arts" = "yes"; then
AC_DEFINE(USE_ARTS, 1, [If we use arts volume])
LIB_ARTS="-lartskde"
AC_SUBST(LIB_ARTS)
fi
KDE_INIT_DOXYGEN([KEG Network API Reference], [Version $VERSION])

@ -1,3 +0,0 @@
KDE_LANG = en
KDE_DOCS = knemo
SUBDIRS = $(AUTODIRS)

@ -1,3 +0,0 @@
KDE_LANG = en
KDE_DOCS = kcontrol/knemo

@ -1,40 +0,0 @@
These are installation instructions for Mandrake 10.0.
They have been tested with Mandrake 10.0 Download Edition but should
also work for the Official Edition.
The simplest way to compile KNemo for Mandrake is:
1. `cd' to the directory containing KNemos source code and type
`./configure --prefix=/usr' to configure the package for Mandrake.
2. Open the file `knemod\interfaceicon.cpp' and go to line 257.
Change the line from
process << "tdecmshell" << "kcm_knemo";
to
process << "tdecmshell" << "/usr/share/applnk/Settings/Network/kcm_knemo";
Do the same in line 64 of `knemod\knemodaemon.cpp'
3. Save your changes.
4. Type `make' to compile the package.
5. Type `make install' to install the programs and any data files and
documentation.
Now you should be able start KNemo as a KDE Service and open its
configuration dialog from the context menu of the tray icon.
IMPORTANT: If you already installed and started KNemo before doing the
above changes it may be neccessary to open the configuration dialog
manually by running
tdecmshell /usr/share/applnk/Settings/Network/kcm_knemo
on the console after you have installed KNemo with the above solution,
because KNemo won't display any icons in the system traybar until it
is configured to do so.

@ -1,17 +0,0 @@
SUBDIRS = kcm knemod
#EXTRA_DIST = AUTHORS COPYING ChangeLog INSTALL README TODO knemo.lsm
#MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
#messages: rc.cpp
# $(EXTRACTRC) `find . -name "*.ui"` >> rc.cpp
# $(EXTRACTRC) `find . -name "*.rc"` >> rc.cpp
# LIST=`find . -name \*.h -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
# if test -n "$$LIST"; then \
# $(XGETTEXT) $$LIST -o $(podir)/knemo.pot; \
# fi
#include ../admin/Doxyfile.am

@ -1,33 +0,0 @@
dnl put here things which have to be done as very last part of configure
if test -z "$PATH_IFCONFIG"; then
echo ""
echo "You're missing the program 'ifconfig'."
echo "KNemo won't be able to run without it so please install 'ifconfig'"
echo "which is normally part of a package called 'net-tools' or similar"
echo "and run configure again."
echo ""
all_tests=bad
fi
if test -z "$PATH_IWCONFIG"; then
echo ""
echo "You're missing the program 'iwconfig'."
echo "KNemo works without 'iwconfig' being installed but you won't be able"
echo "to monitor the wireless extensions of wireless interfaces."
echo "If you would like to have these additional features install"
echo "'iwconfig' which can be found in a package called 'wireless-tools'"
echo "or similar and run configure again."
echo ""
fi
if test -z "$PATH_ROUTE"; then
echo ""
echo "You're missing the program 'route'."
echo "KNemo works without 'route' being installed but KNemo won't be able"
echo "to display the default gateway of an interface."
echo "If you would like to have this additional feature install"
echo "'route' which can be found in a package called 'net-tools'"
echo "or similar and run configure again."
echo ""
fi

@ -1,37 +0,0 @@
AM_INIT_AUTOMAKE(knemo, 0.4.8)
dnl These are common macros that you might or might not want to use
dnl Image readers/writers
dnl If you want to use this test, you have to define it somewhere
dnl KDE_CHECK_KIMGIO
dnl Checks for header files.
AC_HEADER_DIRENT
AC_HEADER_STDC
AC_HEADER_TIME
AC_CHECK_HEADERS(fcntl.h sys/time.h unistd.h stdlib.h paths.h)
AC_CHECK_FUNCS(usleep)
AC_CHECK_LIB(iw,iw_sockets_open)
dnl Check path to ifconfig, iwconfig and route.
AC_PATH_PROG([PATH_IFCONFIG],[ifconfig],,
[$PATH:/sbin:/usr/sbin:/usr/local/sbin])
AC_PATH_PROG([PATH_IWCONFIG],[iwconfig],,
[$PATH:/sbin:/usr/sbin:/usr/local/sbin])
AC_PATH_PROG([PATH_ROUTE],[route],,
[$PATH:/sbin:/usr/sbin:/usr/local/sbin])
if test -n "${PATH_IFCONFIG}"; then
AC_SUBST([PATH_IFCONFIG])
AC_DEFINE_UNQUOTED(PATH_IFCONFIG, "${PATH_IFCONFIG}", [Path of ifconfig program])
fi
if test -n "${PATH_IWCONFIG}"; then
AC_SUBST([PATH_IWCONFIG])
AC_DEFINE_UNQUOTED(PATH_IWCONFIG, "${PATH_IWCONFIG}", [Path of iwconfig program])
fi
if test -n "${PATH_ROUTE}"; then
AC_SUBST([PATH_ROUTE])
AC_DEFINE_UNQUOTED(PATH_ROUTE, "${PATH_ROUTE}", [Path of route program])
fi

@ -33,7 +33,4 @@ tde_add_kpart( kcm_knemo AUTOMOC
##### other data
install(
FILES kcm_knemo.desktop
DESTINATION ${XDG_APPS_INSTALL_DIR}
)
tde_create_translated_desktop( kcm_knemo.desktop )

@ -1,28 +0,0 @@
## Makefile.am for kcm_knemo
messages: rc.cpp
$(XGETTEXT) *.cpp -o $(podir)/kcm_knemo.pot
# this is the program that gets installed. it's name is used for all
# of the other Makefile.am variables
kde_module_LTLIBRARIES = kcm_knemo.la
# set the include path for X, qt and KDE
INCLUDES = -I$(srcdir)/../common -I$(srcdir)/../knemod/backends $(all_includes)
# the library search path.
kcm_knemo_la_LDFLAGS = -module -avoid-version $(all_libraries)
# the libraries to link against.
kcm_knemo_la_LIBADD = $(LIB_TDEUI) $(LIB_QT) $(LIB_TDECORE) $(LIB_TDEIO) -lDCOP
# which sources should be compiled for knemo
kcm_knemo_la_SOURCES = configdialog.cpp configdlg.ui
# these are the headers for your project
noinst_HEADERS = configdialog.h
# let automoc handle all of the meta source files (moc)
METASOURCES = AUTO
xdg_apps_DATA = kcm_knemo.desktop

@ -1,41 +0,0 @@
%define distversion %( perl -e 'Creating /home/percy/src/knemo-0.1/knemo.spec...=\<\>;/(\d+)\.(\d)\.?(\d)?/; print "".(||0)' /etc/*-release)
Name: knemo
Summary: KNemo -- Some description
Version: 0.1
Release: %{_vendor}_%{distversion}
Copyright: GPL
Group: X11/KDE/Utilities
Source: ftp://ftp.kde.org/pub/kde/unstable/apps/utils/%{name}-%{version}.tar.gz
Packager: Percy Leonhardt <percy@eris23.de>
BuildRoot: /tmp/%{name}-%{version}
Prefix: /usr/kde/3.2
%description
A long description
%prep
rm -rf $RPM_BUILD_ROOT
%setup -n %{name}-%{version}
CFLAGS="" CXXFLAGS="" ./configure --disable-debug --enable-final --prefix=%{prefix}
%build
# Setup for parallel builds
numprocs=1
if [ "" = "0" ]; then
numprocs=1
fi
make -j
%install
make install-strip DESTDIR=$RPM_BUILD_ROOT
cd
find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > /%{name}-master.list
find . -type f -o -type l | sed 's|^\.||' >> $RPM_BUILD_DIR/%{name}-master.list
%clean
rm -rf $RPM_BUILD_DIR/%{name}-%{version}
rm -rf $RPM_BUILD_DIR/-master.list
%files -f $RPM_BUILD_DIR/%{name}-master.list

@ -54,7 +54,7 @@ install(
DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}
)
install(
FILES knemod.desktop
tde_create_translated_desktop(
SOURCE knemod.desktop
DESTINATION ${SERVICES_INSTALL_DIR}/kded
)

@ -1,47 +0,0 @@
## Makefile.am for knemo
messages: rc.cpp
$(XGETTEXT) *.cpp -o $(podir)/knemod.pot
# this has all of the subdirectories that make will recurse into. if
# there are none, comment this out
SUBDIRS = pics backends
# this is the program that gets installed. it's name is used for all
# of the other Makefile.am variables
kde_module_LTLIBRARIES = kded_knemod.la
# set the include path for X, qt and KDE
INCLUDES = -I$(srcdir)/../common -I$(srcdir)/backends $(all_includes)
# the library search path.
kded_knemod_la_LDFLAGS = -module -avoid-version $(all_libraries)
# the libraries to link against.
kded_knemod_la_LIBADD = $(LIB_TDEIO) $(LIB_TDEUTILS) $(LIB_QT) $(LIB_TDECORE) $(LIB_TDEUI) -lDCOP -ltdeinit_kded backends/libknemo_backends.la
# which sources should be compiled for knemo
kded_knemod_la_SOURCES = knemodaemon.cpp knemodaemon.skel interface.cpp \
interfaceicon.cpp interfacetray.cpp \
interfacemonitor.cpp \
interfacestatusdlg.ui interfacestatusdialog.cpp \
interfacetooltip.cpp signalplotter.cpp \
interfacestatistics.cpp interfacestatisticsdlg.ui \
interfacestatisticsdialog.cpp
# these are the headers for your project
noinst_HEADERS = knemodaemon.h interface.h interfaceicon.h \
interfacemonitor.h \
interfacestatusdialog.h interfacetray.h \
interfacetooltip.h signalplotter.h \
interfacestatistics.h global.h \
interfacestatisticsdialog.h
# let automoc handle all of the meta source files (moc)
METASOURCES = AUTO
services_DATA = knemod.desktop
servicesdir = $(kde_servicesdir)/kded
mydata_DATA = eventsrc
mydatadir = $(kde_datadir)/knemo

@ -1,22 +0,0 @@
## Makefile.am for knemo backends
noinst_LTLIBRARIES = libknemo_backends.la
# set the include path for X, qt and KDE
INCLUDES = -I$(srcdir)/.. -I$(srcdir)/../../common $(all_includes)
# the library search path.
libknemo_backends_la_LDFLAGS = -module -avoid-version $(all_libraries)
# the libraries to link against.
libknemo_backends_la_LIBADD = $(LIB_TDEIO) $(LIB_TDEUTILS)
# which sources should be compiled as backends
libknemo_backends_la_SOURCES = backendbase.cpp nettoolsbackend.cpp sysbackend.cpp
# the headers of the backends
noinst_HEADERS = backendbase.h nettoolsbackend.h sysbackend.h
# let automoc handle all of the meta source files (moc)
METASOURCES = AUTO

@ -1,2 +0,0 @@
# Install the icons into the global KDE directories
KDE_ICON = AUTO

@ -1,3 +0,0 @@
doc
src
translations

@ -1 +0,0 @@
SUBDIRS= ar bg br cs cy da de el en_GB es et fr ga gl hu it ja ka lt nl pl pt pt_BR ru rw sk sr sr@Latn sv tr

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = ar
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = bg
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = br
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = cs
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = cy
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = da
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = de
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = el
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = en_GB
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = es
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = et
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = fr
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = ga
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = gl
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = hu
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = it
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = ja
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = ka
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = lt
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = nl
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = pl
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = pt
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = pt_BR
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = ru
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = rw
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = sk
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = sr
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1,3 +0,0 @@
KDE_LANG = sr@Latn
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = sv
SUBDIRS = $(AUTODIRS)
POFILES = AUTO

@ -1 +0,0 @@
SUBDIRS= messages

@ -1,3 +0,0 @@
KDE_LANG = tr
SUBDIRS = $(AUTODIRS)
POFILES = AUTO
Loading…
Cancel
Save