25'ten fazla konu seçemezsiniz Konular bir harf veya rakamla başlamalı, kısa çizgiler ('-') içerebilir ve en fazla 35 karakter uzunluğunda olabilir.
koffice/karbon/dialogs/vconfiguredlg.cc

462 satır
14 KiB

/* This file is part of the KDE project
Copyright (C) 2002, 2003 Laurent Montel <lmontel@mandrakesoft.com>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public License
along with this library; see the file COPYING.LIB. If not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <float.h>
#include <tqcheckbox.h>
#include <tqgroupbox.h>
#include <tqlabel.h>
#include <tqlayout.h>
#include <tqvbox.h>
#include <tqvgroupbox.h>
#include <tqcombobox.h>
#include <tqgrid.h>
#include <kiconloader.h>
#include <tdeconfig.h>
#include <kdialogbase.h>
#include <tdelocale.h>
#include <knuminput.h>
#include <kcolorbutton.h>
#include <KoUnitWidgets.h>
#include "karbon_view.h"
#include "karbon_part.h"
#include "karbon_factory.h"
#include "vconfiguredlg.h"
VConfigureDlg::VConfigureDlg( KarbonView* parent )
: KDialogBase( KDialogBase::IconList, i18n( "Configure" ),
KDialogBase::Ok | KDialogBase::Apply | KDialogBase::Cancel | KDialogBase::Default,
KDialogBase::Ok, parent )
{
TQVBox * page = addVBoxPage(
i18n( "Interface" ), i18n( "Interface" ),
BarIcon( "misc", TDEIcon::SizeMedium ) );
m_interfacePage = new VConfigInterfacePage( parent, page );
page = addVBoxPage(
i18n( "Misc" ), i18n( "Misc" ),
BarIcon( "misc", TDEIcon::SizeMedium ) );
m_miscPage = new VConfigMiscPage( parent, page );
page = addVBoxPage(
i18n( "Grid" ), i18n( "Grid" ),
BarIcon( "grid", TDEIcon::SizeMedium ) );
m_gridPage = new VConfigGridPage( parent, page );
connect( m_miscPage, TQT_SIGNAL( unitChanged( int ) ), m_gridPage, TQT_SLOT( slotUnitChanged( int ) ) );
page = addVBoxPage(
i18n( "Document" ), i18n( "Document Settings" ),
BarIcon( "text-x-generic", TDEIcon::SizeMedium ) );
m_defaultDocPage = new VConfigDefaultPage( parent, page );
connect( this, TQT_SIGNAL( okClicked() ), this, TQT_SLOT( slotApply() ) );
}
void VConfigureDlg::slotApply()
{
m_interfacePage->apply();
m_miscPage->apply();
m_defaultDocPage->apply();
m_gridPage->apply();
}
void VConfigureDlg::slotDefault()
{
switch( activePageIndex() )
{
case 0: m_interfacePage->slotDefault();
break;
case 1: m_miscPage->slotDefault();
break;
case 2: m_gridPage->slotDefault();
break;
case 3: m_defaultDocPage->slotDefault();
break;
default:
break;
}
}
VConfigInterfacePage::VConfigInterfacePage( KarbonView* view,
TQVBox* box, char* name )
: TQObject( box->parent(), name )
{
m_view = view;
m_config = KarbonFactory::instance()->config();
m_oldRecentFiles = 10;
m_oldCopyOffset = 10;
m_oldDockerFontSize = 8;
bool oldShowStatusBar = true;
TQVGroupBox* tmpTQGroupBox = new TQVGroupBox( i18n( "Interface" ), box );
m_config->setGroup( "" );
m_oldDockerFontSize = m_config->readNumEntry( "palettefontsize", m_oldDockerFontSize );
if( m_config->hasGroup( "Interface" ) )
{
m_config->setGroup( "Interface" );
m_oldRecentFiles = m_config->readNumEntry(
"NbRecentFile", m_oldRecentFiles );
oldShowStatusBar = m_config->readBoolEntry(
"ShowStatusBar" , true );
m_oldCopyOffset = m_config->readNumEntry(
"CopyOffset", m_oldCopyOffset );
}
m_showStatusBar = new TQCheckBox( i18n( "Show status bar" ), tmpTQGroupBox );
m_showStatusBar->setChecked( oldShowStatusBar );
m_recentFiles = new KIntNumInput( m_oldRecentFiles, tmpTQGroupBox );
m_recentFiles->setRange( 1, 20, 1 );
m_recentFiles->setLabel( i18n( "Number of recent files:" ) );
m_copyOffset = new KIntNumInput( m_oldCopyOffset, tmpTQGroupBox );
m_copyOffset->setRange( 1, 50, 1 );
m_copyOffset->setLabel( i18n( "Copy offset:" ) );
m_dockerFontSize = new KIntNumInput( m_oldDockerFontSize, tmpTQGroupBox );
m_dockerFontSize->setRange( 5, 20, 1 );
m_dockerFontSize->setLabel( i18n( "Palette font size:" ) );
}
void VConfigInterfacePage::apply()
{
bool showStatusBar = m_showStatusBar->isChecked();
KarbonPart* part = m_view->part();
m_config->setGroup( "Interface" );
int recent = m_recentFiles->value();
if( recent != m_oldRecentFiles )
{
m_config->writeEntry( "NbRecentFile", recent );
m_view->setNumberOfRecentFiles( recent );
m_oldRecentFiles = recent;
}
int copyOffset = m_copyOffset->value();
if( copyOffset != m_oldCopyOffset )
{
m_config->writeEntry( "CopyOffset", copyOffset );
m_oldCopyOffset = copyOffset;
}
bool refreshGUI = false;
if( showStatusBar != part->showStatusBar() )
{
m_config->writeEntry( "ShowStatusBar", showStatusBar );
part->setShowStatusBar( showStatusBar );
refreshGUI = true;
}
m_config->setGroup( "" );
int dockerFontSize = m_dockerFontSize->value();
if( dockerFontSize != m_oldDockerFontSize )
{
m_config->writeEntry( "palettefontsize", dockerFontSize );
m_oldDockerFontSize = dockerFontSize;
refreshGUI = true;
}
if( refreshGUI )
part->reorganizeGUI();
}
void VConfigInterfacePage::slotDefault()
{
m_recentFiles->setValue( 10 );
m_dockerFontSize->setValue( 8 );
m_showStatusBar->setChecked( true );
}
VConfigMiscPage::VConfigMiscPage( KarbonView* view, TQVBox* box, char* name )
: TQObject( box->parent(), name )
{
m_view = view;
m_config = KarbonFactory::instance()->config();
KoUnit::Unit unit = view->part()->unit();
TQGroupBox* tmpTQGroupBox = new TQGroupBox( 0, Qt::Vertical, i18n( "Misc" ), box, "GroupBox" );
tmpTQGroupBox->layout()->setSpacing(KDialog::spacingHint());
tmpTQGroupBox->layout()->setMargin(KDialog::marginHint());
TQGridLayout* grid = new TQGridLayout(tmpTQGroupBox->layout(), 4, 2 );
m_oldUndoRedo = 30;
TQString unitType = KoUnit::unitName( unit );
//#################"laurent
//don't load unitType from config file because unit is
//depend from kword file => unit can be different from config file
if( m_config->hasGroup( "Misc" ) )
{
m_config->setGroup( "Misc" );
m_oldUndoRedo = m_config->readNumEntry( "UndoRedo", m_oldUndoRedo );
}
m_undoRedo = new KIntNumInput( m_oldUndoRedo, tmpTQGroupBox );
m_undoRedo->setLabel( i18n( "Undo/redo limit:" ) );
m_undoRedo->setRange( 10, 60, 1 );
grid->addMultiCellWidget( m_undoRedo, 0, 0, 0, 1 );
grid->addWidget( new TQLabel( i18n( "Units:" ), tmpTQGroupBox ), 1, 0 );
m_unit = new TQComboBox( tmpTQGroupBox );
m_unit->insertStringList( KoUnit::listOfUnitName() );
grid->addWidget( m_unit, 1, 1 );
m_oldUnit = KoUnit::unit( unitType );
m_unit->setCurrentItem( m_oldUnit );
connect( m_unit, TQT_SIGNAL( activated( int ) ), TQT_SIGNAL( unitChanged( int ) ) );
}
void VConfigMiscPage::apply()
{
KarbonPart * part = m_view->part();
m_config->setGroup( "Misc" );
if( m_oldUnit != m_unit->currentItem() )
{
m_oldUnit = m_unit->currentItem();
part->setUnit( static_cast<KoUnit::Unit>( m_oldUnit ) );
part->document().setUnit(part->unit());
m_config->writeEntry( "Units", KoUnit::unitName( part->unit() ) );
}
int newUndo = m_undoRedo->value();
if( newUndo != m_oldUndoRedo )
{
m_config->writeEntry( "UndoRedo", newUndo );
part->setUndoRedoLimit( newUndo );
m_oldUndoRedo = newUndo;
}
}
void VConfigMiscPage::slotDefault()
{
m_undoRedo->setValue( 30 );
m_unit->setCurrentItem( 0 );
}
VConfigGridPage::VConfigGridPage( KarbonView* view, TQVBox* page, char* name )
: TQObject( page->parent(), name )
{
m_view = view;
KoUnit::Unit unit = view->part()->document().unit();
KarbonGridData &gd = view->part()->document().grid();
double pgw = view->part()->document().width();
double pgh = view->part()->document().height();
double fw = gd.freq.width();
double fh = gd.freq.height();
double sw = gd.snap.width();
double sh = gd.snap.height();
m_gridChBox = new TQCheckBox( i18n( "Show &grid" ), page );
m_gridChBox->setChecked( gd.isShow );
m_snapChBox = new TQCheckBox( i18n( "Snap to g&rid" ), page );
m_snapChBox->setChecked( gd.isSnap );
TQLabel* gridColorLbl = new TQLabel( i18n( "Grid &color:" ), page);
m_gridColorBtn = new KColorButton( gd.color, page );
gridColorLbl->setBuddy( m_gridColorBtn );
TQGroupBox* spacingGrp = new TQGroupBox( 2, Qt::Horizontal, i18n( "Spacing" ), page );
TQLabel* spaceHorizLbl = new TQLabel( i18n( "&Horizontal:" ), spacingGrp );
m_spaceHorizUSpin = new KoUnitDoubleSpinBox( spacingGrp, 0.0, pgw, 0.1, fw, unit );
spaceHorizLbl->setBuddy( m_spaceHorizUSpin );
TQLabel* spaceVertLbl = new TQLabel( i18n( "&Vertical:" ), spacingGrp );
m_spaceVertUSpin = new KoUnitDoubleSpinBox( spacingGrp, 0.0, pgh, 0.1, fh, unit );
spaceVertLbl->setBuddy( m_spaceVertUSpin );
TQGroupBox* snapGrp = new TQGroupBox( 2, Qt::Horizontal, i18n( "Snap Distance" ), page );
TQLabel* snapHorizLbl = new TQLabel( i18n( "H&orizontal:" ), snapGrp );
m_snapHorizUSpin = new KoUnitDoubleSpinBox( snapGrp, 0.0, fw, 0.1, sw, unit );
snapHorizLbl->setBuddy( m_snapHorizUSpin );
TQLabel* snapVertLbl = new TQLabel( i18n( "V&ertical:" ), snapGrp );
m_snapVertUSpin = new KoUnitDoubleSpinBox( snapGrp, 0.0, fh, 0.1, sh, unit );
snapVertLbl->setBuddy( m_snapVertUSpin );
TQGridLayout* gl = new TQGridLayout();
gl->setSpacing( KDialog::spacingHint() );
gl->addMultiCellWidget( m_gridChBox, 0, 0, 0, 2 );
gl->addMultiCellWidget( m_snapChBox, 1, 1, 0, 2 );
gl->addWidget( gridColorLbl, 2, 0) ;
gl->addWidget( m_gridColorBtn, 2, 1 );
gl->addItem( new TQSpacerItem( 0, 0 ), 2, 2 );
gl->addMultiCellWidget( spacingGrp, 3, 3, 0, 2 );
gl->addMultiCellWidget( snapGrp, 4, 4, 0, 2 );
gl->addMultiCell( new TQSpacerItem( 0, 0 ), 5, 5, 0, 2 );
connect( m_spaceHorizUSpin, TQT_SIGNAL( valueChanged( double ) ), TQT_SLOT( setMaxHorizSnap( double ) ) );
connect( m_spaceVertUSpin, TQT_SIGNAL( valueChanged( double ) ), TQT_SLOT( setMaxVertSnap( double ) ) ) ;
}
void VConfigGridPage::setMaxHorizSnap( double v )
{
m_snapHorizUSpin->setMaxValue( v );
}
void VConfigGridPage::setMaxVertSnap( double v )
{
m_snapVertUSpin->setMaxValue( v );
}
void VConfigGridPage::slotUnitChanged( int u )
{
KoUnit::Unit unit = static_cast<KoUnit::Unit>( u );
m_snapHorizUSpin->setUnit( unit );
m_snapVertUSpin->setUnit( unit );
m_spaceHorizUSpin->setUnit( unit );
m_spaceVertUSpin->setUnit( unit );
}
void VConfigGridPage::apply()
{
KarbonGridData &gd = m_view->part()->document().grid();
gd.freq.setWidth( m_spaceHorizUSpin->value() );
gd.freq.setHeight( m_spaceVertUSpin->value() );
gd.snap.setWidth( m_snapHorizUSpin->value() );
gd.snap.setHeight( m_snapVertUSpin->value() );
gd.isShow = m_gridChBox->isChecked();
gd.isSnap = m_snapChBox->isChecked();
gd.color = m_gridColorBtn->color();
m_view->repaintAll();
}
void VConfigGridPage::slotDefault()
{
KoUnit::Unit unit = m_view->part()->document().unit();
m_spaceHorizUSpin->setValue( KoUnit::toUserValue( 20.0, unit ) );
m_spaceVertUSpin->setValue( KoUnit::toUserValue( 20.0, unit ) );
m_snapHorizUSpin->setValue( KoUnit::toUserValue( 20.0, unit ) );
m_snapVertUSpin->setValue( KoUnit::toUserValue( 20.0, unit ) );
m_gridChBox->setChecked( true );
m_snapChBox->setChecked( true );
m_gridColorBtn->setColor( TQColor( 228, 228, 228 ) );
}
VConfigDefaultPage::VConfigDefaultPage( KarbonView* view,
TQVBox* box, char* name )
: TQObject( box->parent(), name )
{
m_view = view;
m_config = KarbonFactory::instance()->config();
TQVGroupBox* gbDocumentSettings = new TQVGroupBox(
i18n( "Document Settings" ), box );
gbDocumentSettings->setMargin( KDialog::marginHint() );
gbDocumentSettings->setInsideSpacing( KDialog::spacingHint() );
m_oldAutoSave = m_view->part()->defaultAutoSave() / 60;
m_oldBackupFile = true;
m_oldSaveAsPath = true;
if( m_config->hasGroup( "Interface" ) )
{
m_config->setGroup( "Interface" );
m_oldAutoSave = m_config->readNumEntry( "AutoSave", m_oldAutoSave );
m_oldBackupFile = m_config->readBoolEntry( "BackupFile", m_oldBackupFile );
m_oldSaveAsPath = m_config->readBoolEntry( "SaveAsPath", m_oldSaveAsPath );
}
m_autoSave = new KIntNumInput( m_oldAutoSave, gbDocumentSettings );
m_autoSave->setRange( 0, 60, 1 );
m_autoSave->setLabel( i18n( "Auto save (min):" ) );
m_autoSave->setSpecialValueText( i18n( "No auto save" ) );
m_autoSave->setSuffix( i18n( "min" ) );
m_createBackupFile = new TQCheckBox( i18n( "Create backup file" ), gbDocumentSettings );
m_createBackupFile->setChecked( m_oldBackupFile );
m_saveAsPath = new TQCheckBox( i18n( "Save as path" ), gbDocumentSettings );
m_saveAsPath->setChecked( m_oldSaveAsPath );
}
void VConfigDefaultPage::apply()
{
m_config->setGroup( "Document defaults" );
m_config->setGroup( "Interface" );
int autoSave = m_autoSave->value();
if( autoSave != m_oldAutoSave )
{
m_config->writeEntry( "AutoSave", autoSave );
m_view->part()->setAutoSave( autoSave * 60 );
m_oldAutoSave = autoSave;
}
bool state = m_createBackupFile->isChecked();
if( state != m_oldBackupFile )
{
m_config->writeEntry( "BackupFile", state );
m_view->part()->setBackupFile( state );
m_oldBackupFile = state;
}
state = m_saveAsPath->isChecked();
//if( state != m_oldSaveAsPath )
//{
m_config->writeEntry( "SaveAsPath", state );
m_view->part()->document().saveAsPath( state );
m_oldSaveAsPath = state;
//}
}
void VConfigDefaultPage::slotDefault()
{
m_autoSave->setValue( m_view->part()->defaultAutoSave() / 60 );
m_createBackupFile->setChecked( true );
m_saveAsPath->setChecked( true );
}
#include "vconfiguredlg.moc"