Browse Source

Drop scons build support.

Deleted empty file ChangeLog.
Update some cmake files with latest macros.
Add basic cmake build instructions.
Few cosmetics.

Signed-off-by: gregory guy <gregory-tde@laposte.net>
pull/4/head
Gregory Guy 2 months ago
parent
commit
48deaabece
Signed by: cethyel GPG Key ID: 2CC84A1CC6823AF8
  1. 4
      CMakeLists.txt
  2. 1
      ChangeLog
  3. 101
      INSTALL
  4. 20
      Makefile
  5. 23
      README
  6. 234
      SConstruct
  7. 161
      admin/generic.py
  8. 736
      admin/kde.py
  9. 83
      doc/SConscript
  10. 857
      kde.py
  11. 18
      po/CMakeLists.txt
  12. 24
      po/SConscript
  13. 60
      po/messages.sh
  14. BIN
      scons-mini.tar.bz2
  15. 0
      scons-mini.tar.bz2.cdbs-config_list
  16. 5
      src/CMakeLists.txt
  17. 68
      src/SConscript
  18. 61
      unpack_local_scons.sh

4
CMakeLists.txt

@ -41,7 +41,7 @@ tde_setup_paths( )
##### optional stuff
option( WITH_ALL_OPTIONS "Enable all optional support" OFF )
option( WITH_ALL_OPTIONS "Enable all optional support" OFF )
option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
@ -69,7 +69,7 @@ set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined"
##### directories
add_subdirectory( src )
tde_conditional_add_subdirectory( BUILD_DOC doc )
tde_conditional_add_subdirectory( BUILD_DOC doc )
tde_conditional_add_subdirectory( BUILD_TRANSLATIONS po )

1
ChangeLog

@ -1 +0,0 @@

101
INSTALL

@ -1,84 +1,17 @@
sctest REQUIREMENTS
------------------------
tde is needed to run sctest
To compile sctest, the tde development packages
are needed: tdelibs-devel, tdebase-devel and python
scons is also needed http://www.scons.org
(this tool also used by Blender, ..)
Make sure scons is at least v0.96.1, otherwise
the compilation will fail. In case if you do not have
it, a minimum distribution is provided (see SCONS below)
-> One should only have to run :
$ scons
# scons install
(do "scons install" as root - the menus may not
show up if you skip this step)
SCONS
-----
-> If scons is missing, use the one bundled with PROGRAMNAME :
./unpack_local_scons.sh
python scons.py
python scons.py install
(run the last command as root)
-> For your convenience, a quick makefile is created :
./unpack_local_scons.sh
make
make install
USEFUL SCONS COMMANDS
---------------------
build the targets : scons
install them : scons install
clean the project : scons -c
uninstall : scons -c install
build in parallel : scons -j2
CONFIGURATION NOTES
-------------------
The installation scripts are relying on the tde-config program.
The programs tde-config, qmake, uic and moc must be accesssible
through your PATH.
Qt and tde may not be installed as expected (in TQTDIR and TDEDIR)
So until tde-config is able to give that information, you may
have to give those paths.
Here are some examples :
On Fedora/Redhat
scons configure kdeincludes=/usr/include/tde/
On Debian
scons configure qtincludes=/usr/include/qt/ kdeinclude=/usr/include/tde/
To install in some particular location with additional include paths
scons configure prefix=~/tmp extraincludes=/tmp/include:/usr/local/include
For more options to tune the build look at the .py files available on
the top-level directory :
generic.py, kde.py, ...
The build system is based on bksys, a build system that replaces
autoconf, automake and make in a row. Feel free to report your opinion
about it to the authors.
BUILDING RPMS OR DEBS WITH CHECKINSTALL
---------------------------------------
With checkinstall 1.6, use
$ scons
# checkinstall --fstrans=no --nodoc scons install
# scons uninstall
---------------------------------------
enjoy KStreamRipper
Michael Goettsche
Basic Installation
==================
kstreamripper relies on cmake to build.
Here are suggested default options:
-DCMAKE_EXPORT_COMPILE_COMMANDS="ON" \
-DCMAKE_INSTALL_PREFIX="/opt/trinity" \
-DCONFIG_INSTALL_DIR="/etc/trinity" \
-DSYSCONF_INSTALL_DIR="/etc/trinity" \
-DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON" \
-DWITH_ALL_OPTIONS="ON"

20
Makefile

@ -1,20 +0,0 @@
all:
@/usr/bin/scons -Q
# it is also possible to use
# @/usr/bin/scons -Q -j4
install:
@/usr/bin/scons -Q install
clean:
@/usr/bin/scons -Q -c
uninstall:
@/usr/bin/scons -Q -c install
dist:
@/usr/bin/scons -Q dist
distclean:
@/usr/bin/scons -Q distclean

23
README

@ -1 +1,22 @@
see INSTALL
kstreamripper - a TDE frontend for streamripper
KStreamRipper is a small frontend for the streamripper command
line utility (http://streamripper.sourceforge.net).
Streamripper captures internet shoutcast radio streams on your harddisk
and splits them up in mp3 files.
KStreamRipper helps you with managing/ripping your preferred streams.
CONTRIBUTING
==============
If you wish to contribute to KStreamRipper (TDE), you might do so:
- TDE Gitea Workspace (TGW) collaboration tool.
https://mirror.git.trinitydesktop.org/gitea
- TDE Weblate Translation Workspace (TWTW) collaboration tool.
https://mirror.git.trinitydesktop.org/weblate

234
SConstruct

@ -1,234 +0,0 @@
#! /usr/bin/env python
## The kde detection is located in kde.py (have a look!)
## Delete the comments following as you see it fit
"""
scons files are python scripts, comments begin by a "#" symbol
or are enclosed between sequences of triple quotes, so
this is a comment :)
There is a lot of documentation and comments, but you can
remove them when you convert your program
"""
"""
----------------------------------
How to enjoy bksys full and plenty
(and forget about the autohell ? :)
-----------------------------------
The program scons is usually launched as "scons"
When it is not intalled globally, one can run
"python scons.py" instead (ie : to use the local scons
that comes with bksys - try ./unpack_local_scons.sh)
To compile the project, you will then only need to launch
scons on the top-level directory, the scripts find and
cache the proper environment automatically :
-> scons
(or python scons.py)
To clean the project
-> scons -c
(or python scons.py -c)
To install the project
-> scons install
(or python scons.py scons install)
To uninstall the project
-> scons -c install
To compile while being in a subdirectory
-> cd src; scons -u
To (re)configure the project and give particular arguments, use ie :
-> scons configure debug=1
-> scons configure prefix=/tmp/ita debug=full extraincludes=/usr/local/include:/tmp/include prefix=/usr/local
or -> python scons.py configure debug=1
etc ..
The variables are saved automatically after the first run
(look at kde.cache.py, ..)
Here is a quick list of options used (look at generic.py and kde.py) :
prefix
exec_prefix
datadir
libdir
kdeincludes
qtincludes
tdelibs
tqtlibs
extraincludes (a list of paths separated by ':')
"""
###########################################
## Common section, for loading the tools
## Load the builders in config
env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde'], toolpath=['./', './admin'])
#env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'cg'], toolpath=['./'])
#env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'sound'], toolpath=['./'])
#env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'libxml'], toolpath=['./'])
## the configuration should be done by now, quit
if 'configure' in COMMAND_LINE_TARGETS:
env.Exit(0)
"""
Overview of the module system :
Each module (kde.py, generic.py, sound.py..) tries to load a stored
configuration when run. If the stored configuration does not exist
or if 'configure' is given on the command line (scons configure),
the module launches the verifications and detectioins and stores
the results. Modules also call exit when the detection fail.
For example, kde.py stores its config into kde.cache.py
This has several advantages for both developers and users :
- Users do not have to run ./configure to compile
- The build is insensitive to environment changes
- The cache maintains the objects so the config can be changed often
- Each module adds its own help via env.Help("message")
"""
## Use the variables available in the environment - unsafe, but moc, meinproc need it :-/
import os
env.AppendUnique( ENV = os.environ )
## The target make dist requires the python module shutil which is in 2.3
env.EnsurePythonVersion(2, 3)
## Bksys requires scons 0.96
env.EnsureSConsVersion(0, 96)
"""
Explanation of the 'env = Environment...' line :
* the command line arguments and targets are stored in env['TARGS'] and env['ARGS'] for use by the tools
* the part 'tools=['default', 'generic ..' detect and load the necessary functions for doing the things
* the part "toolpath=['./']" tells that the tools can be found in the current directory (generic.py, kde.py ..)
"""
"""
To load more configuration modules one should only have to add the appropriate tool
ie: to detect alsa and add the proper cflags, ldflags ..
a file alsa.py file will be needed, and one should then use :
env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'alsa'], toolpath=['./'])
You can also load environments that are targetted to different platforms
ie: if os.sys.platform = "darwin":
env = Environment(...
elsif os.sys.platform = "linux":
env = Environment(...
"""
## Setup the cache directory - this avoids recompiling the same files over and over again
## this is very handy when working with cvs
env.CacheDir('cache')
## Avoid spreading .sconsign files everywhere - keep this line
env.SConsignFile('scons_signatures')
## If you need more libs and they rely on pkg-config
## ie: add support for GTK (source: the scons wiki on www.scons.org)
# env.ParseConfig('pkg-config --cflags --libs gtk+-2.0')
"""
This tell scons that there are no rcs or sccs files - this trick
can speed up things a bit when having lots of #include
in the source code and for network file systems
"""
env.SourceCode(".", None)
dirs = [ '.', 'src', 'po', 'doc']
for dir in dirs:
env.SourceCode(dir, None)
## If we had only one program (named kvigor) to build,
## we could add before exporting the env (some kde
## helpers in kde.py need it) :
# env['APPNAME'] = 'kvigor'
## Use this define if you are using the kde translation scheme (.po files)
env.Append( CPPFLAGS = ['-DTQT_NO_TRANSLATION'] )
## Add this define if you want to use qthreads
#env.Append( CPPFLAGS = ['-DTQT_THREAD_SUPPORT', '-D_REENTRANT'] )
## To use kdDebug(intvalue)<<"some trace"<<endl; you need to define -DDEBUG - it is done
## in generic.py automatically when you do scons configure debug=1
## There are also many other defines :
### -D_XOPEN_SOURCE=500 -D_DEFAULT_SOURCE -DTQT_NO_ASCII_CAST -DTQT_NO_STL -DTQT_NO_COMPAT -DTQT_NO_TRANSLATION
# where are they documented ? if you know, mail tnagyemail-mail@yahoo@fr please
## Important : export the environment so that SConscript files can the
## configuration and builders in it
Export("env")
####################################################
## Process the SConscript files to build the targets
## the sconscript files are comparable to Makefile.am_s
## except that no makefile is generated here :)
env.SConscript("src/SConscript")
env.SConscript("doc/SConscript")
env.SConscript("po/SConscript")
####################################################
## Quick helper to distribute the program
"""
'scons dist' creates a tarball named bksys-version.tar.bz2
containing the source code - this is handy
do not forget to remove the object files by scons -c
"""
### To make a tarball of your sctest
if 'dist' in COMMAND_LINE_TARGETS:
APPNAME = 'sctest'
VERSION = os.popen("cat VERSION").read().rstrip()
FOLDER = APPNAME+'-'+VERSION
ARCHIVE = FOLDER+'.tar.bz2'
GREEN ="\033[92m"
NORMAL ="\033[0m"
import shutil
import glob
## check if the temporary directory already exists
if os.path.isdir(FOLDER):
shutil.rmtree(FOLDER)
## create a temporary directory
startdir = os.getcwd()
shutil.copytree(startdir, FOLDER)
## remove the unnecessary files
os.popen("find "+FOLDER+" -name \"{arch}\" | xargs rm -rf")
os.popen("find "+FOLDER+" -name \".arch-ids\" | xargs rm -rf")
os.popen("find "+FOLDER+" -name \".arch-inventory\" | xargs rm -f")
os.popen("find "+FOLDER+" -name \"sconsign*\" | xargs rm -f")
os.popen("find "+FOLDER+" -name \"*cache*\" | xargs rm -rf")
os.popen("find "+FOLDER+" -name \"kdiss*-data\" | xargs rm -rf")
os.popen("find "+FOLDER+" -name \"*.pyc\" | xargs rm -f")
os.popen("rm -f "+FOLDER+"/config.py*")
## make the tarball
print(GREEN+"Writing archive "+ARCHIVE+NORMAL)
os.popen("tar cjf "+ARCHIVE+" "+FOLDER)
## remove the temporary directory
if os.path.isdir(FOLDER):
shutil.rmtree(FOLDER)
env.Default(None)
env.Exit(0)

161
admin/generic.py

@ -1,161 +0,0 @@
## Thomas Nagy, 2005
"""
Detect and store the most common options
* kdecxxflags : debug=1 (-g) or debug=full (-g3, slower)
else use the user CXXFLAGS if any, - or -O2 by default
* prefix : the installation path
* extraincludes : a list of paths separated by ':'
ie: scons configure debug=full prefix=/usr/local extraincludes=/tmp/include:/usr/local
"""
BOLD ="\033[1m"
RED ="\033[91m"
GREEN ="\033[92m"
YELLOW ="\033[1m" #"\033[93m" # unreadable on white backgrounds
CYAN ="\033[96m"
NORMAL ="\033[0m"
import os
def exists(env):
return true
def generate(env):
env.Help("""
"""+BOLD+
"""*** Generic options ***
-----------------------"""+NORMAL+"""
"""+BOLD+"""* debug """+NORMAL+""": debug=1 (-g) or debug=full (-g3, slower) else use environment CXXFLAGS, or -O2 by default
"""+BOLD+"""* prefix """+NORMAL+""": the installation path
"""+BOLD+"""* extraincludes """+NORMAL+""": a list of paths separated by ':'
ie: """+BOLD+"""scons configure debug=full prefix=/usr/local extraincludes=/tmp/include:/usr/local
"""+NORMAL)
## Bksys requires scons 0.96
env.EnsureSConsVersion(0, 96)
## Global cache directory
## Put all project files in it so a rm -rf cache will clean up the config
if not 'CACHEDIR' in env:
env['CACHEDIR'] = os.getcwd()+'/cache/'
if not os.path.isdir(env['CACHEDIR']):
os.mkdir(env['CACHEDIR'])
## SCons cache directory
## this avoids recompiling the same files over and over again: very handy when working with cvs
env.CacheDir(os.getcwd()+'/cache/objects')
## Avoid spreading .sconsign files everywhere - keep this line
env.SConsignFile(env['CACHEDIR']+'/scons_signatures')
# Special trick for installing rpms ...
env['DESTDIR']=''
if 'install' in env['TARGS'] and 'DESTDIR' in os.environ:
env['DESTDIR']=os.environ['DESTDIR']+'/'
print(CYAN+'** Enabling DESTDIR for the project ** ' + NORMAL + env['DESTDIR'])
# load the options
from SCons.Variables import Variables
cachefile=env['CACHEDIR']+'generic.cache.py'
opts = Variables(cachefile)
opts.AddVariables(
( 'KDECCFLAGS', 'C flags' ),
( 'KDECXXFLAGS', 'debug level for the project : full or just anything' ),
( 'KDELINKFLAGS', 'additional link flags' ),
( 'PREFIX', 'prefix for installation' ),
( 'EXTRAINCLUDES', 'extra include paths for the project' ),
( 'ISCONFIGURED', 'is the project configured' ),
)
opts.Update(env)
# use this to avoid an error message 'how to make target configure ?'
env.Alias('configure', None)
import SCons.Util
# configure the environment if needed
if 'configure' in env['TARGS'] or not 'ISCONFIGURED' in env:
# be paranoid, unset existing variables
if 'KDECXXFLAGS' in env:
env.__delitem__('KDECXXFLAGS')
if 'KDECCFLAGS' in env:
env.__delitem__('KDECCFLAGS')
if 'KDELINKFLAGS' in env:
env.__delitem__('KDELINKFLAGS')
if 'PREFIX' in env:
env.__delitem__('PREFIX')
if 'EXTRAINCLUDES' in env:
env.__delitem__('EXTRAINCLUDES')
if 'ISCONFIGURED' in env:
env.__delitem__('ISCONFIGURED')
if env['ARGS'].get('debug', None):
debuglevel = env['ARGS'].get('debug', None)
print(CYAN+'** Enabling debug for the project **' + NORMAL)
if (debuglevel == "full"):
env['KDECXXFLAGS'] = ['-DDEBUG', '-g3']
else:
env['KDECXXFLAGS'] = ['-DDEBUG', '-g']
else:
if 'CXXFLAGS' in os.environ:
# user-defined flags (gentooers will be elighted)
env['KDECXXFLAGS'] = SCons.Util.CLVar( os.environ['CXXFLAGS'] )
env.Append( KDECXXFLAGS = ['-DNDEBUG', '-DNO_DEBUG'] )
else:
env.Append(KDECXXFLAGS = ['-O2', '-DNDEBUG', '-DNO_DEBUG'])
if 'CFLAGS' in os.environ:
env['KDECCFLAGS'] = SCons.Util.CLVar( os.environ['CFLAGS'] )
## FreeBSD settings (contributed by will at freebsd dot org)
if os.uname()[0] == "FreeBSD":
if 'PTHREAD_LIBS' in os.environ:
env.AppendUnique( KDELINKFLAGS = SCons.Util.CLVar( os.environ['PTHREAD_LIBS'] ) )
else:
syspf = os.popen('/sbin/sysctl kern.osreldate')
osreldate = int(syspf.read().split()[1])
syspf.close()
if osreldate < 500016:
env.AppendUnique( KDELINKFLAGS = ['-pthread'])
env.AppendUnique( KDECXXFLAGS = ['-D_THREAD_SAFE'])
elif osreldate < 502102:
env.AppendUnique( KDELINKFLAGS = ['-lc_r'])
env.AppendUnique( KDECXXFLAGS = ['-D_THREAD_SAFE'])
else:
env.AppendUnique( KDELINKFLAGS = ['-pthread'])
# User-specified prefix
if env['ARGS'].get('prefix', None):
env['PREFIX'] = env['ARGS'].get('prefix', None)
print(CYAN+'** set the installation prefix for the project : ' + env['PREFIX'] +' **'+ NORMAL)
elif 'PREFIX' in env:
env.__delitem__('PREFIX')
# User-specified include paths
env['EXTRAINCLUDES'] = env['ARGS'].get('extraincludes', None)
if env['ARGS'].get('extraincludes', None):
print(CYAN+'** set extra include paths for the project : ' + env['EXTRAINCLUDES'] +' **'+ NORMAL)
elif 'EXTRAINCLUDES' in env:
env.__delitem__('EXTRAINCLUDES')
env['ISCONFIGURED']=1
# And finally save the options in the cache
opts.Save(cachefile, env)
if 'KDECXXFLAGS' in env:
env.AppendUnique( CPPFLAGS = env['KDECXXFLAGS'] )
if 'KDECCFLAGS' in env:
env.AppendUnique( CCFLAGS = env['KDECCFLAGS'] )
if 'KDELINKFLAGS' in env:
env.AppendUnique( LINKFLAGS = env['KDELINKFLAGS'] )
if 'EXTRAINCLUDES' in env:
incpaths = []
for dir in str(env['EXTRAINCLUDES']).split(':'):
incpaths.append( dir )
env.Append(CPPPATH = incpaths)

736
admin/kde.py

@ -1,736 +0,0 @@
#! /usr/bin/env python
# more or less derived from scons qt.py
# this version makes less scans over the data and is thus faster
# it is less accurate however (when mocable classes become unmocable)
# Thomas Nagy, 2004, 2005 <tnagy2^8@yahoo.fr>
from time import *
import SCons.Util
import string
import os, re
BOLD ="\033[1m"
RED ="\033[91m"
GREEN ="\033[92m"
YELLOW ="\033[1m" #"\033[93m" # unreadable on white backgrounds
CYAN ="\033[96m"
NORMAL ="\033[0m"
# Returns the name of the shared object (i.e. libtdeui.so.4)
# referenced by a libtool archive (like libtdeui.la)
def getSOfromLA(lafile):
contents = open(lafile, 'r').read()
match = re.search("^dlname='([^']*)'$", contents, re.M)
if match:
return match.group(1)
return None
def exists(env):
return True
def detect_kde(env):
""" Detect the qt and kde environment using tde-config mostly """
prefix = env['ARGS'].get('prefix', None)
execprefix = env['ARGS'].get('execprefix', None)
datadir = env['ARGS'].get('datadir', None)
libdir = env['ARGS'].get('libdir', None)
kdeincludes= env['ARGS'].get('kdeincludes', None)
tdelibs = env['ARGS'].get('tdelibs', None)
qtincludes = env['ARGS'].get('qtincludes', None)
tqtincludes= env['ARGS'].get('tqtincludes', None)
qtlibs = env['ARGS'].get('qtlibs', None)
tdedir = env['ARGS'].get('tdedir', None)
## Detect the tde libraries
print("Checking for tde-config : ")
str="which tde-config 2>/dev/null"
if tdedir: str="which %s 2>/dev/null" % (tdedir+'/bin/tde-config')
kde_config = os.popen(str).read().strip()
if len(kde_config):
print(GREEN + 'tde-config was found as ' + kde_config + NORMAL)
else:
if tdedir: print(RED + 'tde-config was NOT found in the folder given ' + tdedir + NORMAL)
else: print(RED + 'tde-config was NOT found in your PATH' + NORMAL)
print("Make sure kde is installed properly")
print("(missing package tdebase-devel?)")
env.Exit(1)
if tdedir: env['TDEDIR']=tdedir
else: env['TDEDIR'] = os.popen(kde_config+' -prefix').read().strip()
print("Checking for tde version : ")
tde_version = os.popen(kde_config+" --version|grep TDE").read().strip().split()[1]
tde_major = tde_version.split('.')[0].lstrip('R')
tde_minor = tde_version.split('.')[1]
tde_patch = tde_version.split('.')[2]
try:
env['KDEm1']=int(tde_major)
except:
pass
try:
env['KDEm2']=int(tde_minor)
except:
pass
try:
env['KDEm3']=int(tde_patch)
except:
pass
if int(tde_major) != 14:
print(RED + tde_version)
print(RED + "Your tde version might be too old" + NORMAL)
print(RED + "Please make sure TDE is at least R14.0" + NORMAL)
else:
print(GREEN + tde_version + NORMAL)
## Detect the qt library
print("Checking for the qt library : ")
qtdir = os.getenv("QTDIR")
if qtdir:
print(GREEN + "qt is in " + qtdir + NORMAL)
else:
libdir = os.popen(kde_config + ' --expandvars --install lib').read().strip()
libtdeuiSO = libdir+'/'+getSOfromLA(libdir+'/libtdeui.la')
try:
m = re.search('(.*)/lib/libqt.*', os.popen('ldd '+libtdeuiSO+' | grep libqt').read().strip().split()[2])
except:
m = re.search('(.*)/lib/libtqt.*', os.popen('ldd ' + libtdeuiSO + ' | grep libtqt').read().strip().split()[2])
pass
if m:
qtdir = m.group(1)
print(YELLOW+"qt was found as " + m.group(1) + NORMAL)
else:
print(RED+"qt was not found"+NORMAL)
print(RED+"Please set QTDIR first (/usr/lib/qt3?)"+NORMAL)
env.Exit(1)
env['QTDIR'] = qtdir.strip()
## Find the necessary programs uic-tqt and moc
print("Checking for uic-tqt : ")
uic = qtdir + "/bin/uic-tqt"
if os.path.isfile(uic):
print(GREEN+"uic-tqt was found as "+uic+NORMAL)
else:
uic = os.popen("which uic-tqt 2>/dev/null").read().strip()
if len(uic):
print(YELLOW+"uic-tqt was found as "+uic+NORMAL)
else:
uic = os.popen("which uic-tqt 2>/dev/null").read().strip()
if len(uic):
print(YELLOW+"uic-tqt was found as "+uic+NORMAL)
else:
print(RED+"uic-tqt was not found - set QTDIR put it in your PATH ?"+NORMAL)
env.Exit(1)
env['QT_UIC'] = uic
print("Checking for moc : ")
moc = qtdir + "/bin/tmoc"
if os.path.isfile(moc):
print(GREEN+"moc was found as "+moc+NORMAL)
else:
moc = os.popen("which tmoc 2>/dev/null").read().strip()
if len(moc):
print(YELLOW+"moc was found as "+moc+NORMAL)
elif os.path.isfile("/usr/share/tqt3/bin/tmoc"):
moc = "/usr/share/tqt3/bin/tmoc"
print(YELLOW+"moc was found as "+moc+NORMAL)
elif os.path.isfile("/usr/share/qt3/bin/tmoc"):
moc = "/usr/share/qt3/bin/tmoc"
print(YELLOW+"moc was found as "+moc+NORMAL)
else:
print(RED+"moc was not found - set QTDIR or put it in your PATH ?"+NORMAL)
env.Exit(1)
env['QT_MOC'] = moc
## check for the tqt includes
print("Checking for the tqt includes : ")
if tqtincludes and os.path.isfile(tqtincludes + "/tqlayout.h"):
# The user told where to look for and it looks valid
print(GREEN + "ok " + tqtincludes + NORMAL)
else:
if os.path.isfile(qtdir + "/include/qlayout.h"):
# Automatic detection
print(GREEN + "ok " + qtdir + "/include/ " + NORMAL)
tqtincludes = qtdir + "/include/"
elif os.path.isfile("/usr/include/tqt/tqlayout.h"):
# Debian probably
print(YELLOW + "the qt headers were found in /usr/include/tqt/ " + NORMAL)
tqtincludes = "/usr/include/tqt"
elif os.path.isfile("/usr/include/qt4/Qt/qglobal.h"):
# Debian probably
print(YELLOW + "the qt headers were found in /usr/include/qt4/ " + NORMAL)
tqtincludes = "/usr/include/qt4"
else:
print(RED + "the qt headers were not found" + NORMAL)
env.Exit(1)
## check for the qt includes
print("Checking for the qt includes : ")
if qtincludes and os.path.isfile(qtincludes + "/ntqglobal.h"):
# The user told where to look for and it looks valid
print(GREEN + "ok " + qtincludes + NORMAL)
else:
if os.path.isfile(qtdir + "/include/ntqglobal.h"):
# Automatic detection
print(GREEN + "ok " + qtdir + "/include/ " + NORMAL)
qtincludes = qtdir + "/include/"
elif os.path.isfile("/usr/include/tqt3/ntqglobal.h"):
# Debian probably
print(YELLOW + "the qt headers were found in /usr/include/tqt3/ " + NORMAL)
qtincludes = "/usr/include/tqt3"
else:
print(RED + "the qt headers were not found" + NORMAL)
env.Exit(1)
print("Checking for the tde includes : ")
kdeprefix = os.popen(kde_config + " --prefix").read().strip()
if not kdeincludes:
kdeincludes = kdeprefix+"/include/"
if os.path.isfile(kdeincludes + "/klineedit.h"):
print(GREEN+"ok "+kdeincludes+NORMAL)
else:
if os.path.isfile(kdeprefix+"/include/tde/klineedit.h"):
# Debian, Fedora probably
print(YELLOW+"the kde headers were found in "+kdeprefix+"/include/tde/"+NORMAL)
kdeincludes = kdeprefix + "/include/tde/"
else:
print(RED+"The kde includes were NOT found"+NORMAL)
env.Exit(1)
if prefix:
## use the user-specified prefix
if not execprefix:
execprefix = prefix
if not datadir:
datadir = prefix+"/share"
if not libdir:
libdir = execprefix+"/lib"
subst_vars = lambda x: x.replace('${exec_prefix}',execprefix).replace('${datadir}',datadir).replace('${libdir}',libdir)
env['KDEBIN'] = subst_vars(os.popen(kde_config + ' --install exe').read().strip())
env['KDEAPPS'] = subst_vars(os.popen(kde_config + ' --install apps').read().strip())
env['KDEDATA'] = subst_vars(os.popen(kde_config + ' --install data').read().strip())
env['KDEMODULE']= subst_vars(os.popen(kde_config + ' --install module').read().strip())
env['KDELOCALE']= subst_vars(os.popen(kde_config + ' --install locale').read().strip())
env['KDEDOC'] = subst_vars(os.popen(kde_config + ' --install html').read().strip())
env['KDEKCFG'] = subst_vars(os.popen(kde_config + ' --install kcfg').read().strip())
env['KDEXDG'] = subst_vars(os.popen(kde_config + ' --install xdgdata-apps').read().strip())
env['KDEMENU'] = subst_vars(os.popen(kde_config + ' --install apps').read().strip())
env['KDEMIME'] = subst_vars(os.popen(kde_config + ' --install mime').read().strip())
env['KDEICONS'] = subst_vars(os.popen(kde_config + ' --install icon').read().strip())
env['KDESERV'] = subst_vars(os.popen(kde_config + ' --install services').read().strip())
else:
# the user has given no prefix, install as a normal kde app
env['PREFIX'] = os.popen(kde_config + ' --prefix').read().strip()
env['KDEBIN'] = os.popen(kde_config + ' --expandvars --install exe').read().strip()
env['KDEAPPS'] = os.popen(kde_config + ' --expandvars --install apps').read().strip()
env['KDEDATA'] = os.popen(kde_config + ' --expandvars --install data').read().strip()
env['KDEMODULE']= os.popen(kde_config + ' --expandvars --install module').read().strip()
env['KDELOCALE']= os.popen(kde_config + ' --expandvars --install locale').read().strip()
env['KDEDOC'] = os.popen(kde_config + ' --expandvars --install html').read().strip()
env['KDEKCFG'] = os.popen(kde_config + ' --expandvars --install kcfg').read().strip()
env['KDEXDG'] = os.popen(kde_config + ' --expandvars --install xdgdata-apps').read().strip()
env['KDEMENU'] = os.popen(kde_config + ' --expandvars --install apps').read().strip()
env['KDEMIME'] = os.popen(kde_config + ' --expandvars --install mime').read().strip()
env['KDEICONS'] = os.popen(kde_config + ' --expandvars --install icon').read().strip()
env['KDESERV'] = os.popen(kde_config + ' --expandvars --install services').read().strip()
env['QTPLUGINS']=os.popen(kde_config + ' --expandvars --install qtplugins').read().strip()
## kde libs and includes
env['KDEINCLUDEPATH']= kdeincludes
if not tdelibs:
tdelibs = os.popen(kde_config + ' --expandvars --install lib').read().strip()
env['KDELIBPATH']= tdelibs
## qt libs and includes
env['QTINCLUDEPATH']= qtincludes
env['TQTINCLUDEPATH']= tqtincludes
if not qtlibs:
qtlibs = qtdir+"/lib"
env['QTLIBPATH']= qtlibs
def mocscan(target, source, env):
splitext = SCons.Util.splitext
q_object_search = re.compile(r'[^A-Za-z0-9]Q_OBJECT[^A-Za-z0-9]')
for obj in source:
if not obj.has_builder():
# binary obj file provided
continue
cpp = obj.sources[0]
if not splitext(str(cpp))[1] == '.cpp':
# not a cplusplus source
continue
# if we have a .ui file, it is automatically handled by Uic
uiname = string.split(cpp.abspath, '.cpp')[0] + ".ui"
if os.path.isfile(uiname):
continue
hname = splitext(cpp.name)[0] + ".h"
h = SCons.Node.FS.find_file(hname, (cpp.get_dir(),) )
if h:
# h file with the Q_OBJECT macro found -> add .moc file
mocfile = string.split(cpp.abspath, '.cpp')[0] + ".moc"
# trick : check if the moc file already exists (avoid a scan)
if os.path.isfile(mocfile):
env.Moc(h)
elif q_object_search.search(h.get_contents()):
# FIXME : strong assumption
env.Moc(h)
return (target, source)
def generate(env):
import SCons.Defaults
import SCons.Tool
env.Help("""
"""+BOLD+
"""*** KDE options ***
-------------------"""+NORMAL+"""
"""+BOLD+"""* prefix """+NORMAL+""": base install path, ie: /usr/local
"""+BOLD+"""* execprefix """+NORMAL+""": install path for binaries, ie: /usr/bin
"""+BOLD+"""* datadir """+NORMAL+""": install path for the data, ie: /usr/local/share
"""+BOLD+"""* libdir """+NORMAL+""": install path for the libs, ie: /usr/lib
"""+BOLD+"""* tdedir """+NORMAL+""": path to TDE directory, ie: /opt/trinity
"""+BOLD+"""* kdeincludes"""+NORMAL+""": path to the kde includes (/usr/include/tde on debian, ...)
"""+BOLD+"""* qtincludes """+NORMAL+""": same punishment, for qt includes (/usr/include/qt on debian, ...)
"""+BOLD+"""* tdelibs """+NORMAL+""": path to the kde libs, for linking the programs
"""+BOLD+"""* qtlibs """+NORMAL+""": same punishment, for qt libraries
ie: """+BOLD+"""scons configure libdir=/usr/local/lib qtincludes=/usr/include/qt
"""+NORMAL)
CLVar = SCons.Util.CLVar
splitext = SCons.Util.splitext
Builder = SCons.Builder.Builder
# Detect the environment - replaces ./configure implicitely
# and store the options into a cache
from SCons.Variables import Variables
cachefile=env['CACHEDIR']+'/kde.cache.py'
opts = Variables(cachefile)
opts.AddVariables(
( 'QTDIR', 'root of qt directory' ),
( 'QTLIBPATH', 'path to the qt libraries' ),
( 'QTINCLUDEPATH', 'path to the qt includes' ),
( 'TQTINCLUDEPATH', 'path to the tqt includes' ),
( 'QT_UIC', 'moc directory'),
( 'QT_MOC', 'moc executable command'),
( 'QTPLUGINS', 'uic executable command'),
( 'TDEDIR', 'root of kde directory' ),
( 'KDELIBPATH', 'path to the kde libs' ),
( 'KDEINCLUDEPATH', 'path to the kde includes' ),
( 'PREFIX', 'root of the program installation'),
( 'KDEBIN', 'installation path of the kde binaries'),
( 'KDEMODULE', 'installation path of the parts and libs'),
( 'KDEAPPS', ''),
( 'KDEDATA', 'installation path of the application data'),
( 'KDELOCALE', ''),
( 'KDEDOC', 'installation path of the application documentation'),
( 'KDEKCFG', 'installation path of the .kcfg files'),
( 'KDEXDG', 'installation path of the service types'),
( 'KDEMENU', ''),
( 'KDEMIME', 'installation path of to the mimetypes'),
( 'KDEICONS', ''),
( 'KDESERV', ''),
)
opts.Update(env)
# reconfigure when things are missing
if 'configure' in env['TARGS'] or not env.has_key('QTDIR') or not env.has_key('TDEDIR'):
detect_kde(env)
# finally save the configuration
opts.Save(cachefile, env)
## set default variables, one can override them in sconscript files
env.Append(CXXFLAGS = ['-I'+env['KDEINCLUDEPATH'], '-I'+env['QTINCLUDEPATH'], '-I'+env['TQTINCLUDEPATH'], '-include', 'tqt.h' ])
env.Append(LIBPATH = [env['KDELIBPATH'], env['QTLIBPATH'] ])
env['STATIC_AND_SHARED_OBJECTS_ARE_THE_SAME'] = 1
env['QT_AUTOSCAN'] = 1
env['QT_DEBUG'] = 0
env['QT_UIC_HFLAGS'] = '-L $QTPLUGINS -nounload'
env['QT_UIC_CFLAGS'] = '$QT_UIC_HFLAGS -tr tr2i18n'
env['QT_LIBS'] = 'tqt'
env['LIBTOOL_FLAGS'] = '--silent --mode=compile --tag=CXX'
env['QT_UICIMPLPREFIX'] = ''
env['QT_UICIMPLSUFFIX'] = '.cpp'
env['QT_MOCHPREFIX'] = ''
env['QT_MOCHSUFFIX'] = '.moc'
env['KDE_KCFG_IMPLPREFIX'] = ''
env['KDE_KCFG_IMPL_HSUFFIX'] = '.h'
env['KDE_KCFG_IMPL_CSUFFIX'] = '.cpp'
env['KDE_SKEL_IMPL_SUFFIX'] = '.skel'
env['MEINPROC'] = 'meinproc'
env['MSGFMT'] = 'msgfmt'
###### ui file processing
def uicGenerator(target, source, env, for_signature):
act=[]
act.append('$QT_UIC $QT_UIC_HFLAGS -o '+target[0].path+' '+source[0].path)
act.append('rm -f ' +target[1].path)
act.append('echo \'#include <tdelocale.h>\' >> '+target[1].path)
act.append('echo \'#include <kdialog.h>\' >> '+target[1].path)
act.append('$QT_UIC $QT_UIC_CFLAGS -impl '+target[0].path+' -o '+target[1].path+'.tmp '+source[0].path)
act.append('cat '+target[1].path+'.tmp >> '+target[1].path)
act.append('rm -f '+target[1].path+'.tmp')
act.append('echo \'#include "' + target[2].name + '"\' >> '+target[1].path)
act.append('moc-tqt $QT_MOC '+target[0].path+' '+target[2].path)
return act
def uicEmitter(target, source, env):
adjustixes = SCons.Util.adjustixes
bs = SCons.Util.splitext(str(source[0].name))[0]
bs = os.path.join(str(target[0].get_dir()),bs)
# first target is automatically added by builder (.h file)
if len(target) < 2:
# second target is .cpp file
target.append(adjustixes(bs,
env.subst('$QT_UICIMPLPREFIX'),
env.subst('$QT_UICIMPLSUFFIX')))
if len(target) < 3:
# third target is .moc file
target.append(adjustixes(bs,
env.subst('$QT_MOCHPREFIX'),
env.subst('$QT_MOCHSUFFIX')))
return target, source
UIC_BUILDER = Builder(
generator = uicGenerator,
emitter = uicEmitter,
suffix = '.h',
src_suffix = '.ui' )
###### moc file processing
env['QT_MOCCOM'] = ('moc-tqt $QT_MOC $SOURCE ${TARGETS[0]}')
MOC_BUILDER = Builder(
action = '$QT_MOCCOM',
suffix = '.moc',
src_suffix = '.h' )
MOCCPP_BUILDER = Builder(
action = '$QT_MOCCOM',
suffix = '_moc.cpp',
src_suffix = '.h' )
###### kcfg file processing
def kcfgGenerator(target, source, env, for_signature):
act=[]
act.append('tdeconfig_compiler -d'+str(source[0].get_dir())+' '+source[1].path+' '+source[0].path)
return act
def kcfgEmitter(target, source, env):
adjustixes = SCons.Util.adjustixes
bs = SCons.Util.splitext(str(source[0].name))[0]
bs = os.path.join(str(target[0].get_dir()),bs)
# first target is automatically added by builder (.h file)
if len(target) < 2:
# second target is .cpp file
target.append(adjustixes(bs, env.subst('$KDE_KCFG_IMPLPREFIX'), env.subst('$KDE_KCFG_IMPL_CSUFFIX')))
if len(source) <2:
kcfgfilename = os.popen("cat "+str(source[0])+"|grep File|sed 's/File.*=//i'").read().rstrip()
source.append( str(source[0].get_dir())+'/'+kcfgfilename )
return target, source
KCFG_BUILDER = Builder(
generator = kcfgGenerator,
emitter = kcfgEmitter,
suffix = '.h',
src_suffix = '.kcfgc' )
###### dcop processing
def dcopGenerator(target, source, env, for_signature):
act=[]
act.append('dcopidl '+source[0].path+' > '+target[1].path+'|| ( rm -f '+target[1].path+' ; false )')
act.append('dcopidl2cpp --c++-suffix cpp --no-signals --no-stub '+target[1].path)
return act
def dcopEmitter(target, source, env):
bs = SCons.Util.splitext(str(source[0].name))[0]
bs = os.path.join(str(target[0].get_dir()),bs)
target.append(bs+'.kidl')
#target.append(bs+'_skel.cpp')
return target, source
DCOP_BUILDER = Builder(
generator = dcopGenerator,
emitter = dcopEmitter,
suffix = '_skel.cpp',
src_suffix = '.h' )
###### documentation (meinproc) processing
MEINPROC_BUILDER = Builder(
action = '$MEINPROC --check --cache $TARGET $SOURCE',
suffix = '.cache.bz2',
src_suffix = '.docbook' )
###### translation files builder
TRANSFILES_BUILDER = Builder(
action = '$MSGFMT $SOURCE -o $TARGET',
suffix = '.gmo',
src_suffix = '.po' )
###### libtool file builder
def laGenerator(target, source, env, for_signature):
act=[]
act.append('echo "dlname=\''+source[0].name+'\'" > '+target[0].path)
act.append('echo "library_names=\''+source[0].name+' '+source[0].name+' '+source[0].name+'\'" >> '+target[0].path)
act.append('echo "old_library=\'\'">> '+target[0].path)
act.append('echo "dependency_libs=\'\'">> '+target[0].path)
act.append('echo "current=0">> '+target[0].path)
act.append('echo "age=0">> '+target[0].path)
act.append('echo "revision=0">> '+target[0].path)
act.append('echo "installed=yes">> '+target[0].path)
act.append('echo "shouldnotlink=no">> '+target[0].path)
act.append('echo "dlopen=\'\'">> '+target[0].path)
act.append('echo "dlpreopen=\'\'">> '+target[0].path)
act.append('echo "libdir=\''+env['KDEMODULE']+'\'" >> '+target[0].path)
return act
LA_BUILDER = Builder(
generator = laGenerator,
suffix = '.la',
src_suffix = '.so' )
##### register the builders
env['BUILDERS']['Uic'] = UIC_BUILDER
env['BUILDERS']['Moc'] = MOC_BUILDER
env['BUILDERS']['Moccpp'] = MOCCPP_BUILDER
env['BUILDERS']['Dcop'] = DCOP_BUILDER
env['BUILDERS']['Kcfg'] = KCFG_BUILDER
env['BUILDERS']['LaFile'] = LA_BUILDER
env['BUILDERS']['Meinproc'] = MEINPROC_BUILDER
env['BUILDERS']['Transfiles'] = TRANSFILES_BUILDER
static_obj, shared_obj = SCons.Tool.createObjBuilders(env)
static_obj.src_builder.append('Uic')
shared_obj.src_builder.append('Uic')
static_obj.src_builder.append('Kcfg')
shared_obj.src_builder.append('Kcfg')
static_obj.src_builder.append('LaFile')
shared_obj.src_builder.append('LaFile')
static_obj.src_builder.append('Meinproc')
shared_obj.src_builder.append('Meinproc')
static_obj.src_builder.append('Transfiles')
shared_obj.src_builder.append('Transfiles')
## find the files to moc, dcop, and link against kde and qt
env.AppendUnique(PROGEMITTER=[mocscan], SHLIBEMITTER=[mocscan], LIBEMITTER =[mocscan])
###########################################
## Handy helpers for building kde programs
## You should not have to modify them ..
#import SCons.Util
skel_ext = [".skel", ".SKEL"]
def KDEfiles(lenv, target, source):
""" Returns a list of files for scons (handles kde tricks like .skel)
It also makes custom checks against double includes like : ['file.ui', 'file.cpp']
(file.cpp is already included because of file.ui) """
src=[]
ui_files=[]
kcfg_files=[]
skel_files=[]
other_files=[]
# For each file, check wether it is a dcop file or not, and create the complete list of sources
for file in source:
bs = SCons.Util.splitext(file)[0]
ext = SCons.Util.splitext(file)[1]
if ext in skel_ext:
lenv.Dcop(bs+'.h')
src.append(bs+'_skel.cpp')
elif ext == ".moch":
lenv.Moccpp(bs+'.h')
src.append(bs+'_moc.cpp')
else:
src.append(file)
if ext == '.ui':
ui_files.append(bs)
elif ext == '.kcfgc':
kcfg_files.append(bs)
elif ext == '.skel':
skel_files.append(bs)
else:
other_files.append(bs)
return src
"""
In the future, these functions will contain the code that will dump the
configuration for re-use from an IDE
"""
import glob
def KDEinstall(lenv, restype, subdir, files):
if not 'install' in env['TARGS']:
return
basedir=env['DESTDIR']
if len(restype)>0:
if not lenv.has_key(restype):
print(RED+"unknown resource type "+restype+NORMAL)
else:
basedir += lenv[restype]+'/'
#print(file) # <- useful to trace stuff :)
install_list = env.Install(basedir+subdir, files)
env.Alias('install', install_list)
return install_list
def KDEinstallas(lenv, restype, destfile, file):
if not 'install' in env['TARGS']:
return
basedir=env['DESTDIR']
if len(restype)>0:
if not lenv.has_key(restype):
print(RED+"unknown resource type "+restype+NORMAL)
else:
basedir += lenv[restype]+'/'
install_list = env.InstallAs(basedir+destfile, file)
env.Alias('install', install_list)
return install_list
def KDEprogram(lenv, target, source):
""" Makes a kde program
The program is installed except if one sets env['NOAUTOINSTALL'] """
src = KDEfiles(lenv, target, source)
program_list = lenv.Program(target, src)
if not lenv.has_key('NOAUTOINSTALL'):
KDEinstall(lenv, 'KDEBIN', '', target)
return program_list
def KDEshlib(lenv, target, source, kdelib=0):
""" Makes a shared library for kde (.la file for klibloader)
The library is installed except if one sets env['NOAUTOINSTALL'] """
src = KDEfiles(lenv, target, source)
library_list = lenv.SharedLibrary(target, src)
lafile_list = lenv.LaFile(target, library_list)
if not lenv.has_key('NOAUTOINSTALL'):
install_dir = 'KDEMODULE'
if kdelib==1:
install_dir = 'KDELIBPATH'
KDEinstall(lenv, install_dir, '', library_list)
KDEinstall(lenv, install_dir, '', lafile_list)
return library_list
def KDEstaticlib(lenv, target, source):
""" Makes a static library for kde - in practice you should not use static libraries
1. they take more memory than shared ones
2. makefile.am needed it because of limitations
(cannot handle sources in separate folders - takes extra processing) """
src = KDEfiles(lenv, target, source)
return lenv.StaticLibrary(target, src)
# do not install static libraries by default
def KDEaddflags_cxx(lenv, fl):
""" Compilation flags for C++ programs """
lenv.AppendUnique(CXXFLAGS = fl)
def KDEaddflags_c(lenv, fl):
""" Compilation flags for C programs """
lenv.AppendUnique(CFLAGS = fl)
def KDEaddflags_link(lenv, fl):
""" Add link flags - Use this if KDEaddlibs below is not enough """
lenv.AppendUnique(LINKFLAGS = fl)
def KDEaddlibs(lenv, libs):
""" Helper function """
lenv.AppendUnique(LIBS = libs)
def KDEaddpaths_includes(lenv, paths):
""" Add new include paths """
lenv.AppendUnique(CPPPATH = paths)
def KDEaddpaths_libs(lenv, paths):
""" Add paths to libraries """
lenv.AppendUnique(LIBPATH = paths)
def KDElang(lenv, folder, appname):
""" Process translations (.po files) in a po/ dir """
transfiles = glob.glob(folder+'/*.po')
for lang in transfiles:
result = lenv.Transfiles(lang)
country = SCons.Util.splitext(result[0].name)[0]
KDEinstallas(lenv, 'KDELOCALE', country+'/LC_MESSAGES/'+appname+'.mo', result)
def KDEicon(lenv, icname):
""" Emulates the behaviour of Makefile.am to install icons
Contributed by: "Andrey Golovizin" <grooz@gorodok@net> """
type_dic = { 'action' : 'actions', 'app' : 'apps', 'device' :
'devices', 'filesys' : 'filesystems', 'mime' : 'mimetypes' }
dir_dic = {
'los' :'locolor/16x16',
'lom' :'locolor/32x32',
'him' :'hicolor/32x32',
'hil' :'hicolor/48x48',
'lo16' :'locolor/16x16',
'lo22' :'locolor/22x22',
'lo32' :'locolor/32x32',
'hi16' :'hicolor/16x16',
'hi22' :'hicolor/22x22',
'hi32' :'hicolor/32x32',
'hi48' :'hicolor/48x48',
'hi64' :'hicolor/64x64',
'hi128':'hicolor/128x128',
'hisc' :'hicolor/scalable',
'cr16' :'crystalsvg/16x16',
'cr22' :'crystalsvg/22x22',
'cr32' :'crystalsvg/32x32',
'cr48' :'crystalsvg/48x48',
'cr64' :'crystalsvg/64x64',
'cr128':'crystalsvg/128x128',
'crsc' :'crystalsvg/scalable'
}
import glob
iconfiles = []
for ext in ['png', 'xpm', 'mng', 'svg', 'svgz']:
files = glob.glob('*-*-%s.%s' % (icname, ext))
iconfiles += files
for iconfile in iconfiles:
tmp = iconfile.split('-')
if len(tmp) != 3:
print(RED + 'WARNING: icon filename has unknown format: ' + iconfile + NORMAL)
continue
[icon_dir, icon_type, icon_filename] = tmp
try:
destfile = '%s/%s/%s/%s' % (lenv['KDEICONS'], dir_dic[icon_dir], type_dic[icon_type], icon_filename)
except KeyError:
print(RED + 'WARNING: unknown icon type: ' + iconfile + NORMAL)
continue
## do not use KDEinstallas here, as parsing from an ide will be necessary
if 'install' in env['TARGS']:
env.Alias('install', env.InstallAs( env['DESTDIR']+'/'+destfile, iconfile ) )
# Attach the functions to the environment so that sconscripts can use them
from SCons.Script.SConscript import SConsEnvironment
SConsEnvironment.KDEprogram = KDEprogram
SConsEnvironment.KDEshlib = KDEshlib
SConsEnvironment.KDEstaticlib = KDEstaticlib
SConsEnvironment.KDEinstall = KDEinstall
SConsEnvironment.KDEinstallas = KDEinstallas
SConsEnvironment.KDElang = KDElang
SConsEnvironment.KDEicon = KDEicon
SConsEnvironment.KDEaddflags_cxx = KDEaddflags_cxx
SConsEnvironment.KDEaddflags_c = KDEaddflags_c
SConsEnvironment.KDEaddflags_link = KDEaddflags_link
SConsEnvironment.KDEaddlibs = KDEaddlibs
SConsEnvironment.KDEaddpaths_includes = KDEaddpaths_includes
SConsEnvironment.KDEaddpaths_libs = KDEaddpaths_libs

83
doc/SConscript

@ -1,83 +0,0 @@
#! /usr/bin/env python
## This script demonstrates to build and install
## the documentation of a kde program with scons
##
## Thomas Nagy, 2005
## This file can be reused freely for any project (see COPYING)
## First load the environment set in the top-level SConstruct file
Import( 'env' )
myenv=env.Clone()
## The following looks complicated but it is not
## We first define a function to install all files as documentation
## The documentation is of course lying in subfolders from here
## * normal files are installed under KDEDOC/destination
## * meinproc files are not installed, but processed into a single
## index.cache.bz2 which is installed afterwards
## This is far more maintainable to have *one* file than
## having lots of almost empty SConscript in several folders
import os
import sys
import glob
import SCons.Util
## Define this to 1 if you are writing documentation else to 0 :)
i_am_a_documentation_writer = 0
## This function uses env imported above
def processfolder(folder, lang, destination=""):
# folder is the folder to process
# lang is the language
# destination is the subdirectory in KDEDOC
docfiles = glob.glob(folder+"/???*.*") # file files that are at least 4 chars wide :)
# warn about errors
#if len(lang) != 2:
# print "error, lang must be a two-letter string, like 'en'"
# when the destination is not given, use the folder
if len(destination) == 0:
destination=folder
docbook_list = []
for file in docfiles:
# do not process folders
if not os.path.isfile(file):
continue
# do not process the cache file
if file == 'index.cache.bz2':
continue
# ignore invalid files (TODO??)
if len( SCons.Util.splitext( file ) ) <= 1 :
continue
ext = SCons.Util.splitext( file )[1]
# docbook files are processed by meinproc
if ext == '.docbook':
docbook_list.append( file )
continue
myenv.KDEinstall('KDEDOC', lang+'/'+destination, file)
# Now process the index.docbook files ..
if len(docbook_list) == 0:
return
if not os.path.isfile( folder+'index.docbook' ):
print("Error, index.docbook was not found in "+folder+'/index.docbook')
return
if i_am_a_documentation_writer:
for file in docbook_list:
myenv.Depends( folder+'index.cache.bz2', file )
myenv.Meinproc( folder+'/index.cache.bz2', folder+'/index.docbook' )
myenv.KDEinstall( 'KDEDOC', lang+'/'+destination, folder+'/index.cache.bz2' )
## Use processfolder for each documentation directory
processfolder('en/', 'en', 'kstreamripper')

857
kde.py

@ -1,857 +0,0 @@
# Made from scons qt.py and (heavily) modified into kde.py
# Thomas Nagy, 2004, 2005 <tnagy2^8@yahoo.fr>
"""
Run scons -h to display the associated help, or look below ..
"""
BOLD ="\033[1m"
RED ="\033[91m"
GREEN ="\033[92m"
YELLOW ="\033[1m" #"\033[93m" # unreadable on white backgrounds
CYAN ="\033[96m"
NORMAL ="\033[0m"
import os, re
# Returns the name of the shared object (i.e. libtdeui.so.4)
# referenced by a libtool archive (like libtdeui.la)
def getSOfromLA(lafile):
contents = open(lafile, 'r').read()
match = re.search("^dlname='([^']*)'$", contents, re.M)
if match:
return match.group(1)
return None
def exists(env):
return True
def detect_kde(env):
""" Detect the qt and kde environment using tde-config mostly """
prefix = env['ARGS'].get('prefix', None)
execprefix = env['ARGS'].get('execprefix', None)
datadir = env['ARGS'].get('datadir', None)
libdir = env['ARGS'].get('libdir', None)
libsuffix = env['ARGS'].get('libsuffix', '')
kdeincludes = env['ARGS'].get('kdeincludes', None)
tdelibs = env['ARGS'].get('tdelibs', None)
qtincludes = env['ARGS'].get('qtincludes', None)
tqtincludes = env['ARGS'].get('tqtincludes', None)
tqtlibs = env['ARGS'].get('tqtlibs', None)
tdedir = env['ARGS'].