KTechlab – circuit simulator for microcontrollers and electronics
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.
 
 
 
 

264 lignes
7.2 KiB

dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(ktechlab, 0.3) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_TQT(3.2.0)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.2.0)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
################################
## BEGIN Check for gpsim 0.21 ##
################################
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ktechlab_save_CXXFLAGS="$CXXFLAGS"
AC_ARG_WITH(glib12, [ --with-glib12 force using glib 1.2.x [default=no]])
if test "x$with_glib12" != "xyes" ; then
glib_cflags=`pkg-config --cflags glib-2.0`
else
glib_cflags=`glib-config --cflags`
fi
AC_SUBST(glib_cflags)
CXXFLAGS="$glib_cflags"
AC_MSG_CHECKING([for gpsim 0.21.4 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); (void)load_symbol_file(0,0); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_4=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.11 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
#include <gpsim/symbol.h>
#include <gpsim/program_files.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_11=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.12 availability])
AC_TRY_COMPILE(
[
#include <gpsim/ValueCollections.h>
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_12=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.27.0 availability])
AC_TRY_COMPILE(
[
#include <gpsim/pic-processor.h>
void func() { pic_processor *Processor; sizeof(Processor->Wreg); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_27_0=yes,
AC_MSG_RESULT( no )
)
CXXFLAGS="$ktechlab_save_CXXFLAGS"
AC_LANG_RESTORE
##############################
## END Check for gpsim 0.21 ##
##############################
################################
## BEGIN DO_NOT_COMPILE CHECK ##
################################
if test x$have_gpsim_0_21_12 == xyes; then
AC_DEFINE([GPSIM_0_21_12],[],[Gpsim 0.21.12 was found])
CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS"
else
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
AC_DEFINE([NO_GPSIM],[],[Gpsim was not found])
LIB_GPSIM=""
else
AC_DEFINE([GPSIM_0_21_11],[],[Gpsim 0.21.11 was found])
fi
else
AC_DEFINE([GPSIM_0_21_4],[],[Gpsim 0.21.4 was found])
fi
fi
if test x$have_gpsim_0_21_4 == xyes || test x$have_gpsim_0_21_11 == xyes || test x$have_gpsim_0_21_12 == xyes; then
wi_cv_lib_readline=no
ac_save_LIBS="$LIBS"
# Note: $LIBCURSES is permitted to be empty.
for LIBREADLINE in "-lreadline" "-lreadline $LIBCURSES" "-lreadline -ltermcap" "-lreadline -lncurses" "-lreadline -lcurses"
do
LIBS="$ac_save_LIBS $LIBREADLINE"
LIB_GPSIM="$LIBREADLINE -lgpsim -lgpsim_eXdbm -lgpsimcli -lgpsimgui"
AC_TRY_RUN([
/* program */
#include <stdio.h>
#include <stdlib.h>
main(int argc, char **argv)
{
/* Note: don't actually call readline, since it may block;
* We just want to see if it (dynamic) linked in okay.
*/
if (argc == 0) /* never true */
readline(0);
exit(0);
}
],[
# action if true
wi_cv_lib_readline=yes
],[
# action if false
wi_cv_lib_readline=no
],[
# action if cross compiling
wi_cv_lib_readline=no
])
if test "$wi_cv_lib_readline" = yes ; then break ; fi
done
LIBS="$ac_save_LIBS"
fi
if test x$have_gpsim_0_27_0 == xyes; then
AC_DEFINE([GPSIM_0_27_0],[],[Gpsim 0.27.0 was found])
fi
AC_SUBST(LIB_GPSIM)
##############################
## END DO_NOT_COMPILE CHECK ##
##############################
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ icons/Makefile ])
AC_CONFIG_FILES([ icons/pics/Makefile ])
AC_CONFIG_FILES([ microbe/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_CONFIG_FILES([ src/core/Makefile ])
AC_CONFIG_FILES([ src/drawparts/Makefile ])
AC_CONFIG_FILES([ src/electronics/Makefile ])
AC_CONFIG_FILES([ src/electronics/components/Makefile ])
AC_CONFIG_FILES([ src/electronics/simulation/Makefile ])
AC_CONFIG_FILES([ src/flowparts/Makefile ])
AC_CONFIG_FILES([ src/gui/Makefile ])
AC_CONFIG_FILES([ src/languages/Makefile ])
AC_CONFIG_FILES([ src/mechanics/Makefile ])
AC_CONFIG_FILES([ src/micro/Makefile ])
AC_OUTPUT
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
echo ""
echo "################################################################################"
echo "# WARNING: gpsim support will not be compiled as gpsim >= 0.21.4 was not found #"
echo "################################################################################"
fi
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi