You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
ktechlab/configure.in

265 lines
7.2 KiB

dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(ktechlab, 0.3) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.2.0)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.2.0)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
################################
## BEGIN Check for gpsim 0.21 ##
################################
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ktechlab_save_CXXFLAGS="$CXXFLAGS"
AC_ARG_WITH(glib12, [ --with-glib12 force using glib 1.2.x [default=no]])
if test "x$with_glib12" != "xyes" ; then
glib_cflags=`pkg-config --cflags glib-2.0`
else
glib_cflags=`glib-config --cflags`
fi
AC_SUBST(glib_cflags)
CXXFLAGS="$glib_cflags"
AC_MSG_CHECKING([for gpsim 0.21.4 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); (void)load_symbol_file(0,0); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_4=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.11 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
#include <gpsim/symbol.h>
#include <gpsim/program_files.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_11=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.12 availability])
AC_TRY_COMPILE(
[
#include <gpsim/ValueCollections.h>
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_12=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.27.0 availability])
AC_TRY_COMPILE(
[
#include <gpsim/pic-processor.h>
void func() { pic_processor *Processor; sizeof(Processor->Wreg); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_27_0=yes,
AC_MSG_RESULT( no )
)
CXXFLAGS="$ktechlab_save_CXXFLAGS"
AC_LANG_RESTORE
##############################
## END Check for gpsim 0.21 ##
##############################
################################
## BEGIN DO_NOT_COMPILE CHECK ##
################################
if test x$have_gpsim_0_21_12 == xyes; then
AC_DEFINE([GPSIM_0_21_12],[],[Gpsim 0.21.12 was found])
CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS"
else
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
AC_DEFINE([NO_GPSIM],[],[Gpsim was not found])
LIB_GPSIM=""
else
AC_DEFINE([GPSIM_0_21_11],[],[Gpsim 0.21.11 was found])
fi
else
AC_DEFINE([GPSIM_0_21_4],[],[Gpsim 0.21.4 was found])
fi
fi
if test x$have_gpsim_0_21_4 == xyes || test x$have_gpsim_0_21_11 == xyes || test x$have_gpsim_0_21_12 == xyes; then
wi_cv_lib_readline=no
ac_save_LIBS="$LIBS"
# Note: $LIBCURSES is permitted to be empty.
for LIBREADLINE in "-lreadline" "-lreadline $LIBCURSES" "-lreadline -ltermcap" "-lreadline -lncurses" "-lreadline -lcurses"
do
LIBS="$ac_save_LIBS $LIBREADLINE"
LIB_GPSIM="$LIBREADLINE -lgpsim -lgpsim_eXdbm -lgpsimcli -lgpsimgui"
AC_TRY_RUN([
/* program */
#include <stdio.h>
#include <stdlib.h>
main(int argc, char **argv)
{
/* Note: don't actually call readline, since it may block;
* We just want to see if it (dynamic) linked in okay.
*/
if (argc == 0) /* never true */
readline(0);
exit(0);
}
],[
# action if true
wi_cv_lib_readline=yes
],[
# action if false
wi_cv_lib_readline=no
],[
# action if cross compiling
wi_cv_lib_readline=no
])
if test "$wi_cv_lib_readline" = yes ; then break ; fi
done
LIBS="$ac_save_LIBS"
fi
if test x$have_gpsim_0_27_0 == xyes; then
AC_DEFINE([GPSIM_0_27_0],[],[Gpsim 0.27.0 was found])
fi
AC_SUBST(LIB_GPSIM)
##############################
## END DO_NOT_COMPILE CHECK ##
##############################
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ icons/Makefile ])
AC_CONFIG_FILES([ icons/pics/Makefile ])
AC_CONFIG_FILES([ microbe/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_CONFIG_FILES([ src/core/Makefile ])
AC_CONFIG_FILES([ src/drawparts/Makefile ])
AC_CONFIG_FILES([ src/electronics/Makefile ])
AC_CONFIG_FILES([ src/electronics/components/Makefile ])
AC_CONFIG_FILES([ src/electronics/simulation/Makefile ])
AC_CONFIG_FILES([ src/flowparts/Makefile ])
AC_CONFIG_FILES([ src/gui/Makefile ])
AC_CONFIG_FILES([ src/languages/Makefile ])
AC_CONFIG_FILES([ src/mechanics/Makefile ])
AC_CONFIG_FILES([ src/micro/Makefile ])
AC_OUTPUT
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
echo ""
echo "################################################################################"
echo "# WARNING: gpsim support will not be compiled as gpsim >= 0.21.4 was not found #"
echo "################################################################################"
fi
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi