You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdebase/ksysguard/ksysguardd/Porting-HOWTO

134 lines
5.0 KiB

This document describes the interface between ksysguard and
ksysguardd. ksysguardd is started as a child of ksysguard, either
directly or via a shell. Alternatively a ksysguardd can listen on a
port and a single instance can then be used by multiple instances of
ksysguard.
This client/server design was chosen, because on some operating
systems the back-end needs elevated permissions. Since C++ programs
should NEVER have setgid/setuid permissions, a plain C back-end was
needed. It also allowed for an easy network support using existing
security mechanisms (ssh).
ksysguard sends commands and ksysguardd answers to them. Each answer
ends with the string "\nksysguardd> ". Error messages are enclosed in
ESC '\033' characters. Therefor regular messages may never contain
ESC. The set of commands that each ksysguardd implementation supports
can be very different. There are only a very few mandatory command and
a few recommended commands.
The mandatory commands are 'monitors', 'test' and 'quit'.
The recommended commands are:
cpu/idle
cpu/sys
cpu/nice
cpu/user
mem/swap/free
mem/swap/used
mem/physical/cached
mem/physical/buf
mem/physical/application
mem/physical/used
mem/physical/free
ps
pscount
Without these commands KSysGuard is not very helpful.
The 'monitors' command returns the list of available sensors. The
output looks like this:
--------
mem/physical/free integer
ps table
pscount integer
ksysguardd>
--------
Sensor names can be hierarchical. Each level is separated by a
/. ksysguard uses a tree widget in the SensorBrowser to display the
commands in a tree. Every sensor name must be followed by the type of
the sensor separated by a tab. Currently 4 different types of sensors
are supported, integer, float, listview and table. The table sensor
returns the information for the ProcessController widget. listview
sensors use a generic table to display information. To find out more
about a sensor an additional command must be implemented for each
sensor that has a questionmark appended to the sensor name. It can be
used to find out more about the sensor.
--------
ksysguardd> mem/physical/free?
Free Memory 0 260708 KB
ksysguardd>
--------
integer and float sensor return a short description, the minimum and
maximum value and the unit. All fields are again separated by
tabs. The minimum and maximum values can both be 0 to trigger the
auto-range feature of the display.
--------
ksysguardd> ps?
Name PID PPID UID GID Status User% System% Nice VmSize VmRss VmLib Login Command
s d d d d S f f d d sksysguardd>
--------
This is the output of the ps? inquiry command. The ps command is the
only recommended command. The answer to ps? consists of 2 lines. Both
lines have the same number of fields each separated by a tab. The
first line specifies the name of the columns and the second the type
of the values in the column.
d: integer value
D: integer value that should be localized in the frontend
f: floating point value
s: string value
S: string value that needs to be translated
Strings must be added to the ProcessList::columnDict dictionary.
For the ProcessController to function properly the Name and PID
columns are mandatory. All other columns are optional and their
content may be implementation dependant. It is highly recommended not
to deviate from the Linux implementation unless absolutely
unavoidable, in order to provide a consistent interface across all
platforms.
The 'test' command can be used by the front-end to find out if a
certain other command is supported by this version of ksysguardd. The
command returns "1\n" if the command is supported and "0\n" if the
command is not supported.
The 'quit' command terminates ksysguardd.
ksysguardd may support dynamic monitor sets. If a CPU is added or an
interface disabled, monitors may be added or removed. To notify the
front-end about this, you need to send the string "RECONFIGURE\n" over
stderr. This causes the front-end to request the list of monitors
again and adapt it's layout accordingly. If ksysguardd receives a
command it doesn't know it has to reply with "UNKNOWN
COMMAND\nksysguardd> ".
ksysguardd does not handle native language support. In order to have a
minimum installation (only a single file) on the monitored machine,
all translation are handled by the front-end. Please see the files
gui/ksgrd/SensorManger.cpp and gui/SensorDisplayLib/ProcessTable.cpp
if you add new strings.
/**
* Since I'm very much a C++ guy I've written some functions which
* provide a similar functionality as template classes for lists and
* arrays. The Linux implementation uses them. Feel free to use them for
* the ports as well if you like. The interface is described in
* CContLib/ccont.h. Unfortunately I still haven't found time to document
* it properly, but the use should be fairly obvious.
*/
Chris <cs@kde.org>
Since the above mentioned CContLib was a little slow I reimplement it and
wrote some docu stuff in the header file. If you need an example for use
look at ksysguardd/Linux/diskstat.(h|c).
Tobias <tokoe@kde.org>