You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdegraphics/libkscan/scandialog.cpp

381 lines
11 KiB

/* This file is part of the KDE Project
Copyright (C) 2001 Nikolas Zimmermann <wildfox@kde.org>
Klaas Freitag <freitag@suse.de>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public License
along with this library; see the file COPYING.LIB. If not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
#include <tqlabel.h>
#include <tqlayout.h>
#include <tqstringlist.h>
#include <tqstrlist.h>
#include <tqtooltip.h>
#include <tqsizepolicy.h>
#include <tqapplication.h>
#include <tqcheckbox.h>
#include <kglobal.h>
#include <klocale.h>
#include <kdebug.h>
#include <tdeconfig.h>
#include <ksimpleconfig.h>
#include <kled.h>
#include <kglobalsettings.h>
#include <kscandevice.h>
// libkscan stuff
#include "scanparams.h"
#include "devselector.h"
#include "img_canvas.h"
#include "previewer.h"
#include "scandialog.h"
#define SCANDIA_SPLITTER_SIZES "ScanDialogSplitter %1"
extern "C" {
void * init_libkscan() {
return new ScanDialogFactory;
}
}
ScanDialogFactory::ScanDialogFactory( TQObject *parent, const char *name )
: KScanDialogFactory( parent, name )
{
setName( "ScanDialogFactory" );
TDEGlobal::locale()->insertCatalogue( TQString::fromLatin1("libkscan") );
}
KScanDialog * ScanDialogFactory::createDialog( TQWidget *parent,
const char *name, bool modal)
{
return new ScanDialog( parent, name, modal );
}
///////////////////////////////////////////////////////////////////
ScanDialog::ScanDialog( TQWidget *parent, const char *name, bool modal )
: KScanDialog( Tabbed, Close|Help, parent, name, modal ),
good_scan_connect(false)
{
TQVBox *page = addVBoxPage( i18n("&Scanning") );
splitter = new TQSplitter(Qt::Horizontal, page, "splitter" );
TQ_CHECK_PTR( splitter );
m_scanParams = 0;
m_device = new KScanDevice( TQT_TQOBJECT(this) );
connect(m_device, TQT_SIGNAL(sigNewImage(TQImage *, ImgScanInfo*)),
this, TQT_SLOT(slotFinalImage(TQImage *, ImgScanInfo *)));
connect( m_device, TQT_SIGNAL(sigScanStart()), this, TQT_SLOT(slotScanStart()));
connect( m_device, TQT_SIGNAL(sigScanFinished(KScanStat)),
this, TQT_SLOT(slotScanFinished(KScanStat)));
connect( m_device, TQT_SIGNAL(sigAcquireStart()), this, TQT_SLOT(slotAcquireStart()));
/* Create a preview widget to the right side of the splitter */
m_previewer = new Previewer( splitter );
TQ_CHECK_PTR(m_previewer );
/* ... and connect to the selector-slots. They communicate user's
* selection to the scanner parameter engine */
/* a new preview signal */
connect( m_device, TQT_SIGNAL( sigNewPreview( TQImage*, ImgScanInfo* )),
this, TQT_SLOT( slotNewPreview( TQImage* )));
m_previewer->setEnabled( false ); // will be enabled in setup()
/* Options-page */
createOptionsTab( );
}
void ScanDialog::createOptionsTab( void )
{
TQVBox *page = addVBoxPage( i18n("&Options"));
setMainWidget(page);
TQGroupBox *gb = new TQGroupBox( 1, Qt::Horizontal, i18n("Startup Options"), page, "GB_STARTUP" );
TQLabel *label = new TQLabel( i18n( "Note: changing these options will affect the scan plugin on next start." ),
gb );
label->setSizePolicy( TQSizePolicy(TQSizePolicy::Expanding, TQSizePolicy::Fixed ) );
/* Checkbox for asking for scanner on startup */
cb_askOnStart = new TQCheckBox( i18n( "&Ask for the scan device on plugin startup"), gb );
TQToolTip::add( cb_askOnStart,
i18n("You can uncheck this if you do not want to be asked which scanner to use on startup."));
TQ_CHECK_PTR( cb_askOnStart );
/* Checkbox for network access */
cb_network = new TQCheckBox( i18n( "&Query the network for scan devices"), gb );
TQToolTip::add( cb_network,
i18n("Check this if you want to query for configured network scan stations."));
TQ_CHECK_PTR( cb_network );
/* Read settings for startup behavior */
TDEConfig *gcfg = TDEGlobal::config();
gcfg->setGroup(TQString::fromLatin1(GROUP_STARTUP));
bool skipDialog = gcfg->readBoolEntry( STARTUP_SKIP_ASK, false );
bool onlyLocal = gcfg->readBoolEntry( STARTUP_ONLY_LOCAL, false );
/* Note: flag must be inverted because of question is 'the other way round' */
cb_askOnStart->setChecked( !skipDialog );
connect( cb_askOnStart, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(slotAskOnStartToggle(bool)));
cb_network->setChecked( !onlyLocal );
connect( cb_network, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(slotNetworkToggle(bool)));
TQWidget *spaceEater = new TQWidget( page );
TQ_CHECK_PTR( spaceEater );
spaceEater->setSizePolicy( TQSizePolicy(TQSizePolicy::Expanding, TQSizePolicy::Expanding) );
}
void ScanDialog::slotNetworkToggle( bool state)
{
bool writestate = !state;
kdDebug(29000) << "slotNetworkToggle: Writing state " << writestate << endl;
TDEConfig *c = TDEGlobal::config();
c->setGroup(TQString::fromLatin1(GROUP_STARTUP));
c->writeEntry( STARTUP_ONLY_LOCAL, writestate, true, true );
}
void ScanDialog::slotAskOnStartToggle(bool state)
{
bool writestate = !state;
kdDebug(29000) << "slotAskOnStartToggle: Writing state " << writestate << endl;
TDEConfig *c = TDEGlobal::config();
c->setGroup(TQString::fromLatin1(GROUP_STARTUP));
c->writeEntry( STARTUP_SKIP_ASK, writestate, true, true );
}
void ScanDialog::slotScanStart( )
{
if( m_scanParams )
{
m_scanParams->setEnabled( false );
KLed *led = m_scanParams->operationLED();
if( led )
{
led->setColor( TQt::red );
led->setState( KLed::On );
}
}
}
void ScanDialog::slotAcquireStart( )
{
if( m_scanParams )
{
KLed *led = m_scanParams->operationLED();
if( led )
{
led->setColor( TQt::green );
}
}
}
void ScanDialog::slotScanFinished( KScanStat status )
{
kdDebug(29000) << "Scan finished with status " << status << endl;
if( m_scanParams )
{
m_scanParams->setEnabled( true );
KLed *led = m_scanParams->operationLED();
if( led )
{
led->setColor( TQt::green );
led->setState( KLed::Off );
}
}
}
bool ScanDialog::setup()
{
if( ! m_device )
{
good_scan_connect = false;
return(false);
}
// The scan device is now closed on closing the scan dialog. That means
// that more work to open it needs to be done in the setup slot like opening
// the selector if necessary etc.
if( m_scanParams )
{
/* if m_scanParams exist it means, that the dialog is already open */
return true;
}
m_scanParams = new ScanParams( splitter );
connect( m_previewer->getImageCanvas(), TQT_SIGNAL( newRect(TQRect)),
m_scanParams, TQT_SLOT(slCustomScanSize(TQRect)));
connect( m_previewer->getImageCanvas(), TQT_SIGNAL( noRect()),
m_scanParams, TQT_SLOT(slMaximalScanSize()));
connect( m_scanParams, TQT_SIGNAL( scanResolutionChanged( int, int )),
m_previewer, TQT_SLOT( slNewScanResolutions( int, int )));
/* continue to attach a real scanner */
/* first, get the list of available devices from libkscan */
TQStringList scannerNames;
TQStrList backends = m_device->getDevices();;
TQStrListIterator it( backends );
while ( it.current() ) {
scannerNames.append( m_device->getScannerName( it.current() ));
++it;
}
/* ..if there are devices.. */
TQCString configDevice;
good_scan_connect = true;
if( scannerNames.count() > 0 )
{
/* allow the user to select one */
DeviceSelector ds( this, backends, scannerNames );
configDevice = ds.getDeviceFromConfig( );
if( configDevice.isEmpty() || configDevice.isNull() )
{
kdDebug(29000) << "configDevice is not valid - starting selector!" << configDevice << endl;
if ( ds.exec() == TQDialog::Accepted )
{
configDevice = ds.getSelectedDevice();
}
}
/* If a device was selected, */
if( ! configDevice.isNull() )
{
/* ..open it (init sane with that) */
m_device->openDevice( configDevice );
/* ..and connect to the gui (create the gui) */
if ( !m_scanParams->connectDevice( m_device ) )
{
kdDebug(29000) << "ERR: Could not connect scan device" << endl;
good_scan_connect = false;
}
}
}
if( configDevice.isNull() || configDevice.isEmpty() )
{
/* No scanner found, open with information */
m_scanParams->connectDevice( 0L );
good_scan_connect = false;
/* Making the previewer gray */
/* disabling is much better than hiding for 'advertising' ;) */
}
/* Move the scan params to the left, for backward compatibility.
* However, having it on the right looks a bit better IMHO */
if( splitter && m_scanParams )
splitter->moveToFirst( m_scanParams );
if( good_scan_connect )
{
m_previewer->setEnabled( true );
m_previewer->setPreviewImage( m_device->loadPreviewImage() );
m_previewer->slConnectScanner( m_device );
}
/* set initial sizes */
setInitialSize( configDialogSize( GROUP_STARTUP ));
TDEConfig *kfg = TDEGlobal::config();
if( kfg )
{
TQRect r = TDEGlobalSettings::desktopGeometry(this);
kfg->setGroup( GROUP_STARTUP );
/* Since this is a vertical splitter, only the width is important */
TQString key = TQString::fromLatin1( SCANDIA_SPLITTER_SIZES ).arg( r.width());
kdDebug(29000) << "Read Splitter-Sizes " << key << endl;
splitter->setSizes( kfg->readIntListEntry( key ));
}
return true;
}
void ScanDialog::slotClose()
{
/* Save the dialog start size to global configuration */
saveDialogSize( GROUP_STARTUP, true );
if( splitter )
{
TDEConfig *kfg = TDEGlobal::config();
if( kfg )
{
TQRect r = TDEGlobalSettings::desktopGeometry(this);
kfg->setGroup( GROUP_STARTUP );
/* Since this is a vertical splitter, only the width is important */
TQString key = TQString::fromLatin1( SCANDIA_SPLITTER_SIZES ).arg( r.width());
kfg->writeEntry( key, splitter->sizes(), true, true);
}
}
if( m_scanParams )
{
delete m_scanParams;
m_scanParams =0;
}
if( m_device )
m_device->slCloseDevice();
else
kdDebug(29000) << "ERR: no device exists :(" << endl;
// bullshit happend
accept();
}
void ScanDialog::slotNewPreview( TQImage *image )
{
if( image )
{
m_previewImage = *image;
// hmmm - dont know, if conversion of the bit-depth is necessary.
// m_previewImage.convertDepth(32);
/* The previewer does not copy the image data ! */
m_previewer->newImage( &m_previewImage );
}
}
ScanDialog::~ScanDialog()
{
}
void ScanDialog::slotFinalImage(TQImage *image, ImgScanInfo *)
{
emit finalImage(*image, nextId());
}
#include "scandialog.moc"