Additional renaming of kde to tde

AUTHORS

@@ -2,6 +2,6 @@ Look in the appropriate subdirectories or files to get more information
 about the authors.
 
 The package is maintained by Timothy Pearson <kb9vqf@pearsoncomputing.net>, however
-numerous people, too many to count, have contributed to kdelibs as a
+numerous people, too many to count, have contributed to tdelibs as a
 whole.  If you have a specific question, please ask on the Trinity project mailing
 list at http://www.trinitydesktop.org/mailinglist.php

CMakeLists.txt

@@ -14,9 +14,9 @@ cmake_minimum_required( VERSION 2.8 )
 
 ##### general package setup #####################
 
-project( kdelibs )
+project( tdelibs )
 
-set( PACKAGE kdelibs )
+set( PACKAGE tdelibs )
 set( VERSION "3.5.13" )
 
 

COMPILING

@@ -18,8 +18,8 @@ Make sure you get the following stuff from the repository:
 
 qt-copy (This is qt-3.3.2)
 arts
-kdelibs
-kdebase (strongly recommended but not strictly necessary)
+tdelibs
+tdebase (strongly recommended but not strictly necessary)
 <any other package you are interested in>
 
 It is important that you compile AND INSTALL the above packages in the 
@@ -91,7 +91,7 @@ file, "Makefile.in" as well as "Makefile" files. So it can be that after
 some struggle to get QTDIR/KDEDIR setup correctly your setup is actually 
 correct, but old -incorrect- settings are still lying around.
 
-The best thing to do in such a case is to do a "svn-clean" (from kdesdk/scripts).
+The best thing to do in such a case is to do a "svn-clean" (from tdesdk/scripts).
 This removes all files which aren't stored in the repository. You can then start all over 
 again with "makefile -f Makefile.cvs". Make sure you don't have any important 
 files lying around in your source tree any more, they will be deleted!
@@ -102,20 +102,20 @@ Makefile.am but not a Makefile. If you try to compile such a directory
 you will get an error like:
 
   Making all in management
-  make[3]: Entering directory /home/gregturp/KDE/kdelibs/tdeprint/management'
+  make[3]: Entering directory /home/gregturp/KDE/tdelibs/tdeprint/management'
   make[3]: *** No rule to make target all'.  Stop.
-  make[3]: Leaving directory /home/gregturp/KDE/kdelibs/tdeprint/management'
+  make[3]: Leaving directory /home/gregturp/KDE/tdelibs/tdeprint/management'
   make[2]: *** [all-recursive] Error 1
-  make[2]: Leaving directory /home/gregturp/KDE/kdelibs/tdeprint'
+  make[2]: Leaving directory /home/gregturp/KDE/tdelibs/tdeprint'
   make[1]: *** [all-recursive] Error 1
-  make[1]: Leaving directory /home/gregturp/KDE/kdelibs'
+  make[1]: Leaving directory /home/gregturp/KDE/tdelibs'
   make: *** [all-recursive-am] Error 2
 
 The solution is to redo "make -f Makefile.cvs; ./configure". 
 
 You can create a single Makefile from a Makefile.am file with the
-kdesdk/scripts/create_makefile script. Make sure to run it from the toplevel
-directory. (E.g. /home/gregturp/KDE/kdelibs)
+tdesdk/scripts/create_makefile script. Make sure to run it from the toplevel
+directory. (E.g. /home/gregturp/KDE/tdelibs)
 
 Problems?
 =========
@@ -131,7 +131,7 @@ a 'q', you probably have not setup your QTDIR correct or have the wrong
 version of Qt.
 
 If you encounter compile errors after updating from SVN, check whether you 
-need to update kdelibs as well. If the problems persists, wait a few hours,
+need to update tdelibs as well. If the problems persists, wait a few hours,
 usually compile errors are fixed shortly after they have been introduced.
 
 If you still have problems read the kde-devel@kde.org mailinglist and/or

COMPILING.html

@@ -13,8 +13,8 @@ should use "make distclean" instead of "make cvs-clean")
 
 <p><ul><li>qt-copy (This is qt-3.3.2)
 <li>arts
-<li>kdelibs
-<li>kdebase (strongly recommended but not strictly necessary)
+<li>tdelibs
+<li>tdebase (strongly recommended but not strictly necessary)
 <li>any other package you are interested in
 </ul>
 
@@ -66,7 +66,7 @@ kde-common module.
 <p>
 Example:<br>
 <pre>
-cd kdelibs
+cd tdelibs
 ln -s ../kde-common/admin
 </pre>
 
@@ -113,7 +113,7 @@ a 'q', you probably have not setup your QTDIR correct or have the wrong
 version of Qt.
 
 <p>If you encounter compile errors after updating from CVS, check whether you 
-need to update kdelibs as well. If the problems persists, wait a few hours,
+need to update tdelibs as well. If the problems persists, wait a few hours,
 usually compile errors are fixed shortly after they have been introduced.
 
 <p>If you still have problems read the kde-devel@kde.org mailinglist and/or

KDE2PORTING.html

@@ -70,9 +70,9 @@ or <a href="http://doc.trolltech.com/porting.html">this page online</a>.<P>
   The first step to get your KDE application to compile under KDE 2.0,
   is to detect KDE 2.0 and Qt 2.x at configure time. The easiest way to
   get a working autoconf/automake framework, is to either use 
-  <a href="http://www.kdevelop.org">KDevelop</a> or
+  <a href="http://www.tdevelop.org">KDevelop</a> or
   <a href="http://home.earthlink.net/~granroth/kapptemplate/index.html">kapptemplate</a>
-  (available in CVS under the module "kdesdk"), to generate a new
+  (available in CVS under the module "tdesdk"), to generate a new
   application template. Replace the generated source files by yours
   and adapt Makefile.am accordingly.
 
@@ -80,11 +80,11 @@ or <a href="http://doc.trolltech.com/porting.html">this page online</a>.<P>
 
 <H3><A NAME="general">Global changes</A></H3>
 
-  We did our best to clean up the header files of kdelibs, so they do
+  We did our best to clean up the header files of tdelibs, so they do
   not include unnecessary bloat for your application. As a consequence, you
   may notice that some header files are missing from your source files as
   they have been included before by kapp.h for example. There is a script
-  in kdesdk/scripts called "fixheaders" that takes care of most of these
+  in tdesdk/scripts called "fixheaders" that takes care of most of these
   cases. Just call "make -k 2&gt;&amp;1 | perl .../fixheaders" and it will try
   to look after the error messages and add includes as it recognize the
   errors.<P>
@@ -175,7 +175,7 @@ or <a href="http://doc.trolltech.com/porting.html">this page online</a>.<P>
   certain option was specified on the command line and your application 
   now automatically supports --help and --version. It aborts with a
   useful error message when the command line contains a syntax error.
-  See kdelibs/tdecore/kcmdlineargs.h for more info.<P>
+  See tdelibs/tdecore/kcmdlineargs.h for more info.<P>
 
 <H4><P ALIGN="RIGHT"><A HREF="#TOC">Return to the Table of Contents</A></P></H4>
 
@@ -505,14 +505,14 @@ are necessary to convert your old KDND-based stuff to Qt DND.<P>
  <STRONG> Replacement table :</STRONG><P>
 <TABLE BORDER="1">
 
-<TR><TD>KFM::download         </TD><TD>-&gt; KIO::NetAccess::download (kdelibs/kio/netaccess.h)</TD></TR>
+<TR><TD>KFM::download         </TD><TD>-&gt; KIO::NetAccess::download (tdelibs/kio/netaccess.h)</TD></TR>
 <TR><TD>KFM::removeTempFile   </TD><TD>-&gt; KIO::NetAccess::removeTempFile</TD></TR>
 <TR><TD COLSPAN="2" ROWSPAN="0">refreshDesktop, sortDesktop, selectRootIcons : removed; kdesktop handles it</TD></TR>
 <TR><TD>KFM::configure        </TD><TD>-&gt; see konqueror DCOP interface</TD></TR>
-<TR><TD>KFM::openURL          </TD><TD>-&gt; "(void) new KRun (url)" (kdelibs/kio/krun.h)</TD></TR>
+<TR><TD>KFM::openURL          </TD><TD>-&gt; "(void) new KRun (url)" (tdelibs/kio/krun.h)</TD></TR>
 <TR><TD>KFM::refreshDirectory </TD><TD>-&gt; not needed anymore since konqy/kdesktop use KDirWatch</TD></TR>
-<TR><TD>KFM::openProperties   </TD><TD>-&gt; "(void) new KPropertiesDialog (url)" (kdelibs/kfile/kpropsdlg.h)</TD></TR>
-<TR><TD>KFM::exec             </TD><TD>-&gt; "(void) new KRun (url)" (kdelibs/kio/krun.h)</TD></TR>
+<TR><TD>KFM::openProperties   </TD><TD>-&gt; "(void) new KPropertiesDialog (url)" (tdelibs/kfile/kpropsdlg.h)</TD></TR>
+<TR><TD>KFM::exec             </TD><TD>-&gt; "(void) new KRun (url)" (tdelibs/kio/krun.h)</TD></TR>
 <TR><TD>KFM::copy, KFM::move  </TD><TD>-&gt; KIO::Job (async, see kio/job.h)<BR>
                             or KIO::NetAccess (sync, see kio/netaccess.h)</TD></TR>
 <TR><TD>DlgLocation           </TD><TD>-&gt; Use KLineEditDlg (tdeui/klineeditdlg.h) instead</TD></TR>
@@ -552,10 +552,10 @@ input font most closely, but can display the given charset.<P>
 <H3><A NAME="KWizard">KWizard, KNoteBook</A></H3>
 
 KWizard is based on TQWizard now. The API has changed. Consult Qt's
-documentation and kdelibs/kdetest/kwizardtest.cpp for an example use.<P>
+documentation and tdelibs/kdetest/kwizardtest.cpp for an example use.<P>
 KNoteBook (deeply entwined with the former KWizard) has been removed until
 someone is willing to port it to work with the new wizard. If you want to
-use it you'll find the necessary files in kdegraphics/kiconedit.<P>
+use it you'll find the necessary files in tdegraphics/kiconedit.<P>
 
 <H4><P ALIGN="RIGHT"><A HREF="#TOC">Return to the Table of Contents</A></P></H4>
 
@@ -674,7 +674,7 @@ KPixmapEffect::<BR></TD>
                  PipeCross,<BR>
                  Elliptic]</TD></TR></TABLE>
 
-Gradients. See kdelibs/kdetest/kgradienttest &amp; kunbalancedgradienttest for
+Gradients. See tdelibs/kdetest/kgradienttest &amp; kunbalancedgradienttest for
 information on how they actually look.<P>
 
 Look further in this document for other info about pixmap effect code 
@@ -778,7 +778,7 @@ The format for modules for the KDE Control Center has changed quite
 a bit. If you want to port your module to the new schema, please
 consult<P>
 
-kdebase/kcontrol/README<P>
+tdebase/kcontrol/README<P>
 
 which explains what needs to be done.<P>
 
@@ -805,9 +805,9 @@ provides some useful lists, like the list of all managed windows).
 
 Use kdDebug, kdWarning, kdError, kdFatal to log debug output, warnings and
 errors in a very flexible way. kdebug has been improved, and the API simplified.
-kdesdk/scripts/kDebug2kdDebug.sh provides a script for automating the conversion.
+tdesdk/scripts/kDebug2kdDebug.sh provides a script for automating the conversion.
 Note that enabling/disabling debug output can now be done with kdebugdialog,
-which can be found in kdebase. The hidden dialog on C+S+F12 no longer exists.
+which can be found in tdebase. The hidden dialog on C+S+F12 no longer exists.
 <P>
 Also, note that qDebug and fprintf aren't disabled by -DNDEBUG, whereas kdDebug is.
 One more reason to use kdDebug !

KDE3PORTING.html

@@ -33,9 +33,9 @@ or <a href="http://doc.trolltech.com/3.0/porting.html">this page online</a>.<P>
   The first step to get your KDE application to compile under KDE 3.0,
   is to detect KDE 3.0 and Qt 3.x at configure time. The easiest way to
   get a working autoconf/automake framework, is to either use 
-  <a href="http://www.kdevelop.org">KDevelop</a> or
+  <a href="http://www.tdevelop.org">KDevelop</a> or
   <a href="http://home.earthlink.net/~granroth/kapptemplate/index.html">kapptemplate</a>
-  (available in CVS under the module "kdesdk"), to generate a new
+  (available in CVS under the module "tdesdk"), to generate a new
   application template. Replace the generated source files by yours
   and adapt Makefile.am accordingly.
 <p>
@@ -253,7 +253,7 @@ hardware accelerated alpha blending.
 <H4>KAnimWidget</H4>
 This class no longer supports reading a list of images, instead it uses a
 single image-file that has been prepared with the kimage_concat tool.
-See kdelibs/pics/hicolor/kde for an example of its use.
+See tdelibs/pics/hicolor/kde for an example of its use.
 
 <H4>KContainerLayout</H4>
 This class has been removed, use Qt layouts instead.
@@ -471,7 +471,7 @@ setURLArgs does the job.
 <H3><A NAME="kspell">Changes in kspell</A></H3>
 
 <H4>KSpell</H4>
-The API has been cleaned up to be in line with the rest of kdelibs, in particular:
+The API has been cleaned up to be in line with the rest of tdelibs, in particular:
 <ul>
 <li>suggestions() now returns a TQStringList instead of a pointer to a QStringList
 <li>intermediateBuffer() now returns a TQString instead of a pointer to a QString

Makefile.am.in

@@ -56,13 +56,13 @@ messages:
 	echo ./tdecore/kde-config.cpp.in >> files ;\
 	$(EXTRACTRC) `find $$dirs -maxdepth 1 \( -name "*.rc" -o -name "*.ui" \) ` ./dnssd/kcm_kdnssd.kcfg > rc.cpp; \
 	: > kde.pot ;\
-	$(XGETTEXT) -ktranslate -x qt-messages.pot rc.cpp `cat files` && cat messages.po qt-messages.pot > $(podir)/kdelibs.pot
+	$(XGETTEXT) -ktranslate -x qt-messages.pot rc.cpp `cat files` && cat messages.po qt-messages.pot > $(podir)/tdelibs.pot
 	$(XGETTEXT) common_texts.cpp -o kde.pot
 	rm -f dirs
 
 EXTRA_DIST = admin kde.pot \
 	COMPILING COMPILING.html COPYING.BSD DEBUG \
-	KDE2PORTING.html NAMING common_texts.cpp kdelibs.lsm kdoc.rules \
+	KDE2PORTING.html NAMING common_texts.cpp tdelibs.lsm kdoc.rules \
 	qt-messages.pot configure.in.in configure.in.mid configure.in.bot
 
 MAINTAINERCLEANFILES = configure.files subdirs
@@ -72,7 +72,7 @@ dist-hook:
 
 # Rule for generating HTML documentation [you need kdoc installed]
 # Don't forget to run qt2kdoc first (qt2kdoc $QTDIR/doc/html)
-# The kdelibs docu will end up in ./srcdoc/
+# The tdelibs docu will end up in ./srcdoc/
 kdedoc:
 	cd $(top_srcdir) && \
 	makekdedoc -p'--skip-internal' --outputdir=$(top_builddir)/srcdoc
@@ -87,30 +87,30 @@ qtmessages:
 		grep -v $$file list > list.new && mv list.new list ;\
 	done ;\
 	xgettext -C -ktr -kQT_TRANSLATE_NOOP `cat list`  ;\
-	cd ../../kdelibs ;\
+	cd ../../tdelibs ;\
 	mv $$top_srcdir/../qt-copy/src/messages.po $$top_srcdir
 	echo "remove the header from messages.po and move to qt-messages.pot"
 
 include admin/Doxyfile.am
 include admin/deps.am
 
-apidox-am-toplevel-yes: apidox-am-toplevel-kdelibs
+apidox-am-toplevel-yes: apidox-am-toplevel-tdelibs
 
-apidox-am-toplevel-kdelibs: $(top_builddir)/apidocs/qt/qt.tag
+apidox-am-toplevel-tdelibs: $(top_builddir)/apidocs/qt/qt.tag
 
 $(top_builddir)/apidocs/qt/qt.tag:
 	@echo "*** Creating a tag file for the Qt library:"; \
 	$(mkinstalldirs) $(top_builddir)/apidocs/qt; \
 	doxytag -t $(top_builddir)/apidocs/qt/qt.tag $(QTDOCDIR)
 
-install-data-local: install-apidox-kdelibs
+install-data-local: install-apidox-tdelibs
 
 ## install the tag file for the Qt documentation
-install-apidox-kdelibs:
+install-apidox-tdelibs:
 	if test -f $(top_builddir)/apidocs/qt/qt.tag; then \
 		$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/qt ;\
 		echo $(INSTALL_DATA) $(top_builddir)/apidocs/qt/qt.tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/qt; \
 		$(INSTALL_DATA) $(top_builddir)/apidocs/qt/qt.tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/qt; \
 	fi
 
-.PHONY: install-apidox-kdelibs apidox-am-toplevel-kdelibs apidox-am-toplevel-yes qtmessages
+.PHONY: install-apidox-tdelibs apidox-am-toplevel-tdelibs apidox-am-toplevel-yes qtmessages

README

@@ -1,6 +1,6 @@
 In this file:
 
-* About kdelibs
+* About tdelibs
 * Licensing
 * Common Mistakes
 * Upgrading
@@ -8,7 +8,7 @@ In this file:
 * More Info
 
 
-About kdelibs
+About tdelibs
 -------------
 This is version 3.5.13 of the Trinity Desktop Environment [TDE] libraries.
 
@@ -165,7 +165,7 @@ See also the file DEBUG.
 
 Upgrading
 ---------
-If you have an kdebase older than 3.0 installed, just copy all your .k*rc
+If you have an tdebase older than 3.0 installed, just copy all your .k*rc
 files from $HOME to $HOME/.kde/share/config. In the other case, default
 values are used for most apps.
 
@@ -232,7 +232,7 @@ So, here are some tips on bug reporting:
   Linux Distributor and his appropriate mailing list or bug reporting tool.
 
 * The chance is high that your bug has already been dealt with ... so look
-  if there is a newer version of kdelibs available. Reporting bugs for
+  if there is a newer version of tdelibs available. Reporting bugs for
   older, deprecated versions usually don't get that much attention :-)
 
 * Also the chance is high that another one experienced your problem. The

TODO

@@ -71,7 +71,7 @@ that we would like to make for the next binary incompatible release.
 - Solve need for casting when using bitfield enums (e.g. KProcess::Communication),
   if Simon's solution works.
 
-- Merge kdelibs/tdecore/kuser.h and kdeadmin/kuser/kuser.h.
+- Merge tdelibs/tdecore/kuser.h and tdeadmin/kuser/kuser.h.
 
 - Simplify memory management with KParts. The part and the widget delete each other,
   which in fact makes it more complex to handle. The part owns the widget so it

arts/configure.in.in

@@ -46,7 +46,7 @@ else
 Please reinstall aRts in the same prefix as KDE, different prefixes are not
 supported right now.
 
-(kdelibs prefix is $prefix, aRts prefix is $ARTS_HAVE_PREFIX)
+(tdelibs prefix is $prefix, aRts prefix is $ARTS_HAVE_PREFIX)
   ])
 	fi
   fi
@@ -57,11 +57,11 @@ supported right now.
   AC_MSG_ERROR([aRts $ARTS_WANT_VERSION_MAJOR.$ARTS_WANT_VERSION_MINOR not found.
 
 You'll need to install a suitable version of aRts in the same prefix as KDE
-before you build kdelibs.
+before you build tdelibs.
 
 (found
  * artsc-config: $ARTSCCONFIG
- * kdelibs prefix: $prefix
+ * tdelibs prefix: $prefix
  * aRts prefix: $ARTS_HAVE_PREFIX
  * aRts version: $ARTS_HAVE_VERSION (required: $ARTS_WANT_VERSION_MAJOR.$ARTS_WANT_VERSION_MINOR)
 )

arts/kde/kartsdispatcher.h

@@ -24,7 +24,7 @@
 
 #include <tqobject.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace Arts
 {

arts/kde/kartsserver.h

@@ -24,7 +24,7 @@
 #include "kmedia2.h"
 #include <tqobject.h>
 #include "soundserver.h"
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 /**
  * KArtsServer is a wrapper to conveniently get a reference to a SoundServer,

arts/kde/kaudiomanagerplay.h

@@ -22,7 +22,7 @@
 
 #include <artsflow.h>
 #include <tqstring.h>
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class KArtsServer;
 class TQString;

arts/kde/kaudioplaystream.h

@@ -25,7 +25,7 @@
 #include <tqcstring.h>
 #include <stdsynthmodule.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class KArtsServer;
 namespace Arts { class StereoEffectStack; }

arts/kde/kaudiorecordstream.h

@@ -27,7 +27,7 @@
 
 #include <tqobject.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class KArtsServer;
 namespace Arts { class StereoEffectStack; }

arts/kde/kplayobjectfactory.h

@@ -23,7 +23,7 @@
 #define KPLAYOBJECTFACTORY_H
 
 #include <kurl.h>
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 #include "soundserver.h"
 #include "kplayobject.h"

arts/message/artsmessage.cc

@@ -57,7 +57,7 @@ KAboutData aboutData("artsmessage", I18N_NOOP("artsmessage"), "0.1",
 
 int main(int argc, char **argv) {
 	aboutData.addAuthor("Jeff Tranter", 0, "tranter@kde.org");
-	KGlobal::locale()->setMainCatalogue("kdelibs");
+	KGlobal::locale()->setMainCatalogue("tdelibs");
 	KCmdLineArgs::init(argc, argv, &aboutData);
 	KCmdLineArgs::addCmdLineOptions(options);
 	KApplication app;

configure.in.in

@@ -8,7 +8,7 @@ AC_INIT(acinclude.m4) dnl a source file from your sub dir
 dnl This is so we can use kde-common
 AC_CONFIG_AUX_DIR(admin)
 
-dnl Setting the prefix for kdelibs uses a special version of KDE_SET_PREFIX
+dnl Setting the prefix for tdelibs uses a special version of KDE_SET_PREFIX
 dnl (since that one normally looks for existing kde installations)
 KDE_SET_PREFIX_CORE
 
@@ -102,7 +102,7 @@ KCONFIG_COMPILER="compiled"
 MAKEKDEWIDGETS="compiled"
 
 dnl Checks for libraries etc
-AC_BASE_PATH_KDE([don't test]) dnl kdelibs is a special case
+AC_BASE_PATH_KDE([don't test]) dnl tdelibs is a special case
 KDE_ENABLE_HIDDEN_VISIBILITY
 
 AC_CREATE_KFSSTND(default)

dcop/Makefile.am

@@ -1,4 +1,4 @@
-# This Makefile.am was taken from the kdelibs distribution and
+# This Makefile.am was taken from the tdelibs distribution and
 # modified for DCOP.  Preston Brown (Oct 10, 1999)
 #
 # Copyright (c) 1999 Preston Brown <pbrown@kde.org>

dcop/dcopclient.h

@@ -28,7 +28,7 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 #include <tqvaluelist.h>
 #include <tqstring.h>
 #include <kdatastream.h> // needed for proper bool marshalling
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class DCOPObjectProxy;
 class DCOPClientPrivate;

dcop/dcopidlng/kalyptus

@@ -1,4 +1,4 @@
-#!/usr/bin/perl -I/Users/duke/src/kde/kdebindings/kalyptus
+#!/usr/bin/perl -I/Users/duke/src/kde/tdebindings/kalyptus
 # -*- indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*-
 
 # KDOC -- C++ and CORBA IDL interface documentation tool.

dcop/dcopobject.h

@@ -29,7 +29,7 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 #include <tqptrlist.h>
 #include <tqvaluelist.h>
 #include <kdatastream.h> // needed for proper bool marshalling
-#include "kdelibs_export.h"
+#include "tdelibs_export.h"
 
 class DCOPClient;
 typedef TQValueList<TQCString> QCStringList;

dcop/dcopref.h

@@ -26,7 +26,7 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 #include <tqcstring.h>
 #include <dcoptypes.h>
 #include <kdatastream.h> // needed for proper bool marshalling
-#include "kdelibs_export.h"
+#include "tdelibs_export.h"
 
 class TQDataStream;
 class DCOPObject;

dcop/dcopsignals.h

@@ -26,7 +26,7 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 #include <tqasciidict.h>
 #include <tqptrlist.h>
 #include <tqstring.h>
-#include "kdelibs_export.h"
+#include "tdelibs_export.h"
 
 class DCOPConnection;
 

dcop/dcopstub.h

@@ -30,7 +30,7 @@ class DCOPStubPrivate;
 #include <stdlib.h>
 
 #include <tqstring.h>
-#include "kdelibs_export.h"
+#include "tdelibs_export.h"
 
 /**
 * Abstract base class for dcop stubs as created by the

dnssd/README

@@ -1,7 +1,7 @@
 Checklist to ensure that zeroconf will work:
 
 1) Install Avahi, at least version 0.3
-2) compile kdnssd-avahi and install it to replace 'stub' libkdnssd.so provided by kdelibs
+2) compile kdnssd-avahi and install it to replace 'stub' libkdnssd.so provided by tdelibs
 3) check /etc/nsswitch.conf and ensure that there is 'mdns' before 'dns' in
 line starting with 'host:'. It should be something like:
 host: files mdns dns

doc/Makefile.am

@@ -1,3 +1,3 @@
 
-SUBDIRS = common kspell kdelibs
+SUBDIRS = common kspell tdelibs
 

doc/common/README.Doxygen

@@ -55,7 +55,7 @@ doxygen.sh [--recurse] [--modulename] [--doxdatadir=<dir>] [--installdir=<dir>]
               a subdirectory apidocs/ . Modulename is the last part of
               the <top_srcdir> (usually a KDE SVN module name).
 --doxdatadir=<dir> Locate the HTML header files and support graphics.
-              In kdelibs, the subdirectory doc/common/ contains these
+              In tdelibs, the subdirectory doc/common/ contains these
               files (and this README). In an installed KDE system, 
               $KDEDIR/share/doc/HTML/en/common/ contains a copy.
               This argument is mandatory if doxygen.sh can't guess where
@@ -84,7 +84,7 @@ Differences with current dox: <TODO>
 #
 # sh /mnt/src/tdepim/doc/api/doxygen.sh /mnt/src/tdepim kpilot/lib
 # 
-# When generating dox for kdelibs, a tag file for Qt is also created.
+# When generating dox for tdelibs, a tag file for Qt is also created.
 # The location of Qt is specified indirectly through $QTDOCDIR or,
 # if that is not set, $QTDIR, or otherwise guessed. You may explicitly
 # set the location of a pre-generated tag file with $QTDOCTAG. One

interfaces/khexedit/byteseditinterface.h

@@ -174,7 +174,7 @@ inline BytesEditInterface *bytesEditInterface( T *t )
   * ...
   *
   * TQWidget *BytesEditWidget = KHE::createBytesEditWidget( this, "BytesEditWidget" );
-  * // is e.g. kdeutils (incl. khexedit2) installed, so a widget could be found and created?
+  * // is e.g. tdeutils (incl. khexedit2) installed, so a widget could be found and created?
   * if( BytesEditWidget )
   * {
   * � // fetch the editor interface

interfaces/kimproxy/library/kimproxy.cpp

@@ -217,7 +217,7 @@ bool KIMProxy::initialize()
 	if ( !m_initialized )
 	{
 		m_initialized = true; // we should only do this once, as registeredToDCOP() will catch any new starts
-		// So there is no error from a failed query when using kdelibs 3.2, which don't have this servicetype
+		// So there is no error from a failed query when using tdelibs 3.2, which don't have this servicetype
 		if ( KServiceType::serviceType( IM_SERVICE_TYPE ) ) 
 		{
 			//kdDebug( 790 ) << k_funcinfo << endl;

interfaces/kmediaplayer/view.h

@@ -25,7 +25,7 @@
 #define KMEDIAPLAYERVIEW_H
 
 #include <tqwidget.h>
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KMediaPlayer
 {

interfaces/kregexpeditor/kregexpeditorinterface.h

@@ -8,11 +8,11 @@
  * 
  * @author Jesper K. Pedersen blackie@kde.org
  *
- * The actual editor is located in kdeutils, with an interface in
- * kdelibs. This means that it is a bit more complicated to create an
+ * The actual editor is located in tdeutils, with an interface in
+ * tdelibs. This means that it is a bit more complicated to create an
  * instance of the editor, but only a little bit more complicated.
  *
- * To check if kregexpeditor in kdeutils is installed and available use this line:
+ * To check if kregexpeditor in tdeutils is installed and available use this line:
  * 
  * \code
  * bool installed=!KTrader::self()->query("KRegExpEditor/KRegExpEditor").isEmpty();
@@ -24,7 +24,7 @@
  * \code
  * TQDialog *editorDialog = KParts::ComponentFactory::createInstanceFromQuery<TQDialog>( "KRegExpEditor/KRegExpEditor" );
  * if ( editorDialog ) {
- *   // kdeutils was installed, so the dialog was found fetch the editor interface
+ *   // tdeutils was installed, so the dialog was found fetch the editor interface
  *   KRegExpEditorInterface *editor = ::tqqt_cast<KRegExpEditorInterface *>( editorDialog );
  *   Q_ASSERT( editor ); // This should not fail!
  *   
@@ -52,7 +52,7 @@
  * KParts::ComponentFactory::createInstanceFromQuery<TQWidget>( 
  *     "KRegExpEditor/KRegExpEditor", TQString::null, parent );
  * if ( editorWidget ) {
- *   // kdeutils was installed, so the widget was found fetch the editor interface
+ *   // tdeutils was installed, so the widget was found fetch the editor interface
  *   KRegExpEditorInterface *editor = ::tqqt_cast<KRegExpEditorInterface *>( editorWidget );
  *   Q_ASSERT( editor ); // This should not fail!
  *   

interfaces/kscript/scriptmanager.h

@@ -25,7 +25,7 @@
 #include <tqdict.h>
 #include <tqobject.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class ScriptInfo;
 //namespace KScriptInterface

interfaces/kspeech/kspeech.h

@@ -57,8 +57,8 @@
  *
  * @section Requirements
  *
- * You may build any KDE application to use KSpeech, since the interface is in kdelibs, but
- * the kdeaccessibility package must be installed for KTTS to function.
+ * You may build any KDE application to use KSpeech, since the interface is in tdelibs, but
+ * the tdeaccessibility package must be installed for KTTS to function.
  *
  * You will need a speech synthesis engine, such as Festival.  See the KTTS Handbook
  * for the latest information on installing and configuring speech engines and voices
@@ -105,7 +105,7 @@
         speech engine
    @endverbatim
  *
- * The %KTTSD Plugin API is documented in PluginConf in the kdeaccessibility module.
+ * The %KTTSD Plugin API is documented in PluginConf in the tdeaccessibility module.
  *
  * There is a separate GUI application, called kttsmgr, for providing %KTTSD
  * configuration and job management.
@@ -186,11 +186,11 @@
  *
  * There are two methods of making DCOP calls from your application to %KTTSD.
  *
- *   - Manually code them using dcopClient object.  See kdebase/konqueror/kttsplugin/khtmlkttsd.cpp
+ *   - Manually code them using dcopClient object.  See tdebase/konqueror/kttsplugin/khtmlkttsd.cpp
  *     for an example.  This method is recommended if you want to make a few simple calls to KTTSD.
  *   - Use kspeech_stub as described below.  This method generates the marshalling code for you
  *     and is recommended for a more complex speech-enabled applications.  kcmkttsmgr in the
- *     kdeaccessibility module is an example that uses this method.
+ *     tdeaccessibility module is an example that uses this method.
  *
  * To make DCOP calls from your program using kspeech_stub, follow these steps:
  *

interfaces/ktexteditor/blockselectioninterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_blockselectioninterface_h__
 #define __ktexteditor_blockselectioninterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/clipboardinterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_clipboardinterface_h__
 #define __ktexteditor_clipboardinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/codecompletioninterface.h

@@ -22,7 +22,7 @@
 #include <tqstring.h>
 #include <tqstringlist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/configinterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_configinterface_h__
 #define __ktexteditor_configinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 class KConfig;

interfaces/ktexteditor/cursorinterface.h

@@ -22,7 +22,7 @@
 #include <tqptrlist.h>
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/documentinfo.h

@@ -22,7 +22,7 @@
 class TQString;
 class TQCString;
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/dynwordwrapinterface.h

@@ -20,7 +20,7 @@
 #ifndef __ktexteditor_dynwordwrapinterface_h__
 #define __ktexteditor_dynwordwrapinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/editinterface.h

@@ -21,7 +21,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/editinterfaceext.h

@@ -22,7 +22,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/encodinginterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_encodinginterface_h__
 #define __ktexteditor_encodinginterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQString;
 class TQCString;

interfaces/ktexteditor/highlightinginterface.h

@@ -20,7 +20,7 @@
 #ifndef __ktexteditor_highlightinginterface_h__
 #define __ktexteditor_highlightinginterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQString;
 class TQCString;

interfaces/ktexteditor/markinterface.h

@@ -22,7 +22,7 @@
 
 #include <tqptrlist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/plugin.h

@@ -21,7 +21,7 @@
 
 #include <tqobject.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/popupmenuinterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_popupmenuinterface_h__
 #define __ktexteditor_popupmenuinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 class TQPopupMenu;

interfaces/ktexteditor/printinterface.h

@@ -20,7 +20,7 @@
 #ifndef __ktexteditor_printinterface_h__
 #define __ktexteditor_printinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/searchinterface.h

@@ -20,7 +20,7 @@
 #ifndef __ktexteditor_searchinterface_h__
 #define __ktexteditor_searchinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQRegExp;
 class TQString;

interfaces/ktexteditor/selectioninterface.h

@@ -22,7 +22,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/selectioninterfaceext.h

@@ -22,7 +22,7 @@
 #ifndef __ktexteditor_selectioninterface_ext_h__
 #define __ktexteditor_selectioninterface_ext_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/sessionconfiginterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_sessionconfiginterface_h__
 #define __ktexteditor_sessionconfiginterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 class KConfig;

interfaces/ktexteditor/templateinterface.h

@@ -23,7 +23,7 @@
 #include <tqmap.h>
 #include <tqwidget.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/texthintinterface.h

@@ -22,7 +22,7 @@
 #include <tqstring.h>
 #include <tqstringlist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KTextEditor
 {

interfaces/ktexteditor/undointerface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_undointerface_h__
 #define __ktexteditor_undointerface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/variableinterface.h

@@ -19,7 +19,7 @@
 #ifndef _KTEXTEDITOR_VARIABLE_INTERFACE_H_
 #define _KTEXTEDITOR_VARIABLE_INTERFACE_H_
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQString;
 

interfaces/ktexteditor/viewcursorinterface.h

@@ -20,7 +20,7 @@
 #ifndef __ktexteditor_viewcursorinterface_h__
 #define __ktexteditor_viewcursorinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

interfaces/ktexteditor/viewstatusmsginterface.h

@@ -19,7 +19,7 @@
 #ifndef __ktexteditor_viewstatusmsginterface_h__
 #define __ktexteditor_viewstatusmsginterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQString;
 class TQCString;

interfaces/ktexteditor/wordwrapinterface.h

@@ -20,7 +20,7 @@
 #ifndef __ktexteditor_wordwrapinterface_h__
 #define __ktexteditor_wordwrapinterface_h__
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQCString;
 

kab/README

@@ -1,4 +1,4 @@
-Note: libkab is now obsolete. Please use libkabc in kdelibs/kabc. libkab is
+Note: libkab is now obsolete. Please use libkabc in tdelibs/kabc. libkab is
 no longer installed. It's only needed for the conversion tool converting
 libkab data to libkabc data.
 
@@ -28,7 +28,7 @@ compile the sources using optimization level 6 (-O6).  Stick to -O2, and
 it should work. Note: This seems to be solved since gcc 2.95.
 
 Since this directory provides only the kab library, you will have to
-install the kdeutils package, that contains the sources for kab's binary,
+install the tdeutils package, that contains the sources for kab's binary,
 also.
 
                                                    Mirko Boehm, March 2000.

kab/README.KABAPI

@@ -9,7 +9,7 @@ include directory into your sources.
 
 The documentation of the kab API is contained in the header file
 (kabapi.h), you can extract it by parsing the file with kdoc. The kab
-binary source directory in the kdeutils package contains a sample program
+binary source directory in the tdeutils package contains a sample program
 that tries to explain some basic functions of the API. It is important
 that you report any bugs you find in the API or in the rest of kab to
 

kab/TODO

@@ -7,7 +7,7 @@ Thanks.
 PS: I am still looking for volunteers who try writing the import filters. 
     Most often I do not have the different other addressbook programs myselfes.
 PS1: This TODO list deals with tasks to add to the KDE addressbook
-library. If you want the application to be extended, read kdeutils/kab/TODO.
+library. If you want the application to be extended, read tdeutils/kab/TODO.
 --------------------------------------------------------------------------------
 ° [done] change mail addresses to an unlimited list with selection before
          sending an email

kabc/README

@@ -4,7 +4,7 @@ PURPOSE:
 
 libkabc provides an API for address book data. This can be used by all KDE
 application using data of this type, e.g. KAddressBook, KMail, KOrganizer,
-KPilot etc. It is meant as replacement for libkab (in kdebase/kab).
+KPilot etc. It is meant as replacement for libkab (in tdebase/kab).
 
 FEATURES:
 

kabc/address.h

@@ -25,7 +25,7 @@
 #include <tqstring.h>
 #include <tqvaluelist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 // template tags for address formatting localization
 #define KABC_FMTTAG_realname   TQString("%n")

kabc/agent.h

@@ -25,7 +25,7 @@ class TQDataStream;
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/errorhandler.h

@@ -24,7 +24,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 class TQWidget;
 

kabc/format.h

@@ -22,7 +22,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/geo.h

@@ -23,7 +23,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/key.h

@@ -23,7 +23,7 @@
 
 #include <tqvaluelist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/ldif.h

@@ -25,7 +25,7 @@
 #include <tqcstring.h>
 #include <tqmemarray.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/lock.h

@@ -24,7 +24,7 @@
 #include <tqstring.h>
 #include <tqobject.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/phonenumber.h

@@ -24,7 +24,7 @@
 #include <tqvaluelist.h>
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/picture.h

@@ -23,7 +23,7 @@
 
 #include <tqimage.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/plugin.h

@@ -23,7 +23,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/scripts/createisomap.pl

@@ -1,7 +1,7 @@
 #!/usr/bin/perl
 #
 # Create a translation table countryname->iso-code from the entry.desktop
-# files in kdebase/l10n/*/
+# files in tdebase/l10n/*/
 #
 # USAGE EXAMPLE:
 #     ./createisomap.pl $KDEDIR/share/locale/l10n > countrytransl.map

kabc/secrecy.h

@@ -23,7 +23,7 @@
 
 #include <tqvaluelist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/sortmode.h

@@ -21,7 +21,7 @@
 #ifndef KABC_SORTMODE_H
 #define KABC_SORTMODE_H
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 #include <kabc/addressee.h>
 

kabc/sound.h

@@ -24,7 +24,7 @@
 #include <tqcstring.h>
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/timezone.h

@@ -23,7 +23,7 @@
 
 #include <tqstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace KABC {
 

kabc/vcard/include/VCardEntity.h

@@ -25,7 +25,7 @@
 #define  ENTITY_H
 
 #include <tqcstring.h>
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace VCARD
 {

kabc/vcard/include/VCardEnum.h

@@ -26,7 +26,7 @@
 
 #include <tqcstring.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace VCARD
 {

kabc/vcard/include/VCardRToken.h

@@ -27,7 +27,7 @@
 
 #include <tqstrlist.h>
 
-#include <kdelibs_export.h>
+#include <tdelibs_export.h>
 
 namespace VCARD
 {

kate/ChangeLog

@@ -42,7 +42,7 @@
     by using run length encoding for the attributes if they are
     dumped into the bytearray
 
-2002-06-01 Christian Couder <christian@kdevelop.org>
+2002-06-01 Christian Couder <christian@tdevelop.org>
   * Move view stuff from katedocument to kateviewinternal.
 
 2002-05-20 Christoph Cullmann <cullmann@kde.org>
@@ -51,11 +51,11 @@
     (mem leak, KateUndo is now only for internal use in KateUndoGroup)
   * start of convertion my*** to m_*** and add m_ to any other private stuff
   
-2002-05-17 Christian Couder <christian@kdevelop.org>
+2002-05-17 Christian Couder <christian@tdevelop.org>
   * Move font stuff from katedocument into new katefont.h and
     katefont.cpp files, and clean up katedocument font stuff. 
 
-2002-05-14 Christian Couder <christian@kdevelop.org>
+2002-05-14 Christian Couder <christian@tdevelop.org>
   * Big clean up in katedocument using new katecursor stuff. 
 
 2002-05-12  Bernd Gehrmann  <bernd@mail.berlios.de>
@@ -63,17 +63,17 @@
   * If servicetype in the browser extension specifies an encoding,
     use that instead of user's local encoding
 
-2002-05-11 Christian Couder <christian@kdevelop.org>
+2002-05-11 Christian Couder <christian@tdevelop.org>
   * implement the KTextEditor::Cursor in the KateCursor class 
 
 2002-05-04 Christoph Cullmann <cullmann@kde.org>
   * first KTextEditor::ViewPlugin which works
     drop the helloworld plugin, as it is really no good example (bad code, ..)
 
-2002-05-04 Christian Couder <christian@kdevelop.org>
+2002-05-04 Christian Couder <christian@tdevelop.org>
   * fix undo for comment and uncomment
 	
-2002-05-01 Christian Couder <christian@kdevelop.org>
+2002-05-01 Christian Couder <christian@tdevelop.org>
   * cleanups related to the uncomment feature in katetextline and katedocument
 
 2002-01-04 Christoph Cullmann <cullmann@kde.org>
@@ -101,7 +101,7 @@
 
 2001-11-29 Joseph Wenninger <jowenn@kde.org>
   * KWrite/Kate use different font settings for printing and viewing now
-  * Fixed a small crash in my kdevelop->kate port of the codecompletion interface
+  * Fixed a small crash in my tdevelop->kate port of the codecompletion interface
 
 2001-11-26 Christoph Cullmann <cullmann@kde.org>
   * backspace bug fixed
@@ -166,21 +166,21 @@
   * myself back again ;)
   * now kate is clean (only qt3), no backports ;)
 
-2001-08-24  christian@kdevelop.org
+2001-08-24  christian@tdevelop.org
   * reimplement the commenting of selections on some languages
 
-2001-08-19  christian@kdevelop.org
+2001-08-19  christian@tdevelop.org
   * added back Sather highlighting support
   * improved Eiffel language syntax highlighting support
   * added Eiffel language comment directive in eiffel.xml
   * added Ada language comment directive in ada.xml
 
-2001-08-15  christian@kdevelop.org
+2001-08-15  christian@tdevelop.org
   * committed Eiffel language syntax highlighting support
 
 2001-08-08  rokrau@yahoo.com
   * committed changes to Kate's API necessary for integration of kate as
-    a kpart into kdevelop
+    a kpart into tdevelop
 
 2001-05-13 Christoph Cullmann <cullmann@kde.org>
   * after some time of learning for my "Abitur" now again some fixes ;):
@@ -313,7 +313,7 @@
     Soon to come
 
 2001-02-26 Christoph Cullmann <cullmann@kde.org>
-  * Kate is a part of kdebase :)
+  * Kate is a part of tdebase :)
     sourceforge.net CVS won't be used in the future
 
 2001-02-24 Phlip <phlip_cpp@my-deja.com>

kate/NEWS

@@ -22,7 +22,7 @@
 2002-01-10
   Kate Part is now in Kdelibs ;)
 
-Old news of kate part/app in kdebase:
+Old news of kate part/app in tdebase:
 
 2002-01-03
   Kate App and Part separated

kate/TODO

@@ -56,7 +56,7 @@ TODO:
   switch between short / detailed descriptions)
 
 * Whatever else is needed for multiuser editing (and perhaps put most of it
-  inside the part, so eg. kate, kdevelop, quanta etc. could all use it)
+  inside the part, so eg. kate, tdevelop, quanta etc. could all use it)
 
 * Scripting (we don't have any yet do we?)
 

kate/data/bash.xml

@@ -13,7 +13,7 @@
 <!-- (c) 2004 by Wilbert Berendsen (wilbert@kde.nl)
     Changes by Matthew Woehlke (mw_triad@users.sourceforge.net)
     Changes by Sebastian Pipping (webmaster@hartwork.org)
-    Released under the LGPL, part of kdelibs/kate -->
+    Released under the LGPL, part of tdelibs/kate -->
 
   <highlighting>
     <list name="keywords">

kate/data/d.xml

@@ -10,7 +10,7 @@
   Copyright (C) 2007 - Jari-Matti Mäkelä <jmjm@iki.fi>
   Copyright (C) 2004 - Simon J Mackenzie <project.katedxml@smackoz.fastmail.fm>
 
-  This code is released under the LGPL as part of kdelibs/kate.
+  This code is released under the LGPL as part of tdelibs/kate.
 
   ========================================================================
 

kate/data/language.dtd

@@ -17,7 +17,7 @@
         <!DOCTYPE language SYSTEM "language.dtd">
 
         You can validate your syntax files using checkXML from the development
-        package of kdelibs:
+        package of tdelibs:
          checkXML yourSyntax.xml
         If you see any 'validity error' lines, you should fix them. If you get
         a lot of 'No template matches' lines, everything's just fine. You've

kate/data/lex.xml

@@ -6,7 +6,7 @@
   LEX.XML supports syntax highlighting for Lex/Flex source under Kate.
 
   Copyright (C) 2004 - Jan Villat <jan.villat@net2000.ch>
-  This code is released under the LGPL as part of kdelibs/kate.
+  This code is released under the LGPL as part of tdelibs/kate.
 
   ========================================================================
 

kate/data/yacc.xml

@@ -6,7 +6,7 @@
   YACC.XML supports syntax highlighting for Yacc/Bison source under Kate.
 
   Copyright (C) 2004 - Jan Villat <jan.villat@net2000.ch>
-  This code is released under the LGPL as part of kdelibs/kate.
+  This code is released under the LGPL as part of tdelibs/kate.
 
   ========================================================================
 

kate/interfaces/katecmd.cpp

@@ -118,7 +118,7 @@ const TQString KateCmd::fromHistory( uint index ) const
 //BEGIN KateCmdShellCompletion
 /*
    A lot of the code in the below class is copied from
-   kdelibs/kio/kio/kshellcompletion.cpp
+   tdelibs/kio/kio/kshellcompletion.cpp
    Copyright (C) 2000 David Smith <dsmith@algonet.se>
    Copyright (C) 2004 Anders Lund <anders@alweb.dk>
 */

kate/part/katecodecompletion.cpp

@@ -2,7 +2,7 @@
    Copyright (C) 2001 Joseph Wenninger <jowenn@kde.org>
    Copyright (C) 2002 John Firebaugh <jfirebaugh@kde.org>
    Copyright (C) 2001 by Victor Röder <Victor_Roeder@GMX.de>
-   Copyright (C) 2002 by Roberto Raggi <roberto@kdevelop.org>
+   Copyright (C) 2002 by Roberto Raggi <roberto@tdevelop.org>
 
    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public

kate/part/katecodecompletion.h

@@ -3,7 +3,7 @@
    Copyright (C) 2001 Joseph Wenninger <jowenn@kde.org>
    Copyright (C) 2002 John Firebaugh <jfirebaugh@kde.org>
    Copyright (C) 2001 by Victor Röder <Victor_Roeder@GMX.de>
-   Copyright (C) 2002 by Roberto Raggi <roberto@kdevelop.org>
+   Copyright (C) 2002 by Roberto Raggi <roberto@tdevelop.org>
 
    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public

kate/part/katecursor.cpp

@@ -1,5 +1,5 @@
 /* This file is part of the KDE libraries
-   Copyright (C) 2002 Christian Couder <christian@kdevelop.org>
+   Copyright (C) 2002 Christian Couder <christian@tdevelop.org>
    Copyright (C) 2001, 2003 Christoph Cullmann <cullmann@kde.org>
    Copyright (C) 2001 Joseph Wenninger <jowenn@kde.org>
    Copyright (C) 1999 Jochen Wilhelmy <digisnap@cs.tu-berlin.de>

kate/part/katecursor.h

@@ -1,5 +1,5 @@
 /* This file is part of the KDE libraries
-   Copyright (C) 2002 Christian Couder <christian@kdevelop.org>
+   Copyright (C) 2002 Christian Couder <christian@tdevelop.org>
    Copyright (C) 2001, 2003 Christoph Cullmann <cullmann@kde.org>
    Copyright (C) 2001 Joseph Wenninger <jowenn@kde.org>
    Copyright (C) 1999 Jochen Wilhelmy <digisnap@cs.tu-berlin.de>

kate/part/katefont.cpp

@@ -1,5 +1,5 @@
 /* This file is part of the KDE libraries
-   Copyright (C) 2002 Christian Couder <christian@kdevelop.org>
+   Copyright (C) 2002 Christian Couder <christian@tdevelop.org>
    Copyright (C) 2001 Christoph Cullmann <cullmann@kde.org>
    Copyright (C) 2001 Joseph Wenninger <jowenn@kde.org>
    Copyright (C) 1999 Jochen Wilhelmy <digisnap@cs.tu-berlin.de>

kate/part/katefont.h

@@ -1,5 +1,5 @@
 /* This file is part of the KDE libraries
-   Copyright (C) 2002 Christian Couder <christian@kdevelop.org>
+   Copyright (C) 2002 Christian Couder <christian@tdevelop.org>
    Copyright (C) 2001 Christoph Cullmann <cullmann@kde.org>
    Copyright (C) 2001 Joseph Wenninger <jowenn@kde.org>
    Copyright (C) 1999 Jochen Wilhelmy <digisnap@cs.tu-berlin.de>

kate/part/kateschema.cpp

@@ -296,7 +296,7 @@ KateSchemaConfigColorTab::KateSchemaConfigColorTab( TQWidget *parent, const char
   label->tqsetAlignment( AlignLeft|AlignVCenter);
   m_current = new KColorButton(b);
 
-  // Markers from kdelibs/interfaces/ktextinterface/markinterface.h
+  // Markers from tdelibs/interfaces/ktextinterface/markinterface.h
   b = new TQHBox (gbTextArea);
   b->setSpacing(KDialog::spacingHint());
   m_combobox = new KComboBox(b, "color_combo_box");

kde.pot

@@ -8,7 +8,7 @@ msgstr ""
 "POT-Creation-Date: 2005-06-13 01:26+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <kde-i18n-doc@kde.org>\n"
+"Language-Team: LANGUAGE <tde-i18n-doc@kde.org>\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"