Port to CMake, drop Autotools

Signed-off-by: Mavridis Philippe <mavridisf@gmail.com>
pull/2/head
Mavridis Philippe 2 months ago
parent 0c35ccad36
commit d7d77db043
Signed by: blu.256
GPG Key ID: F8D2D7E2F989A494

@ -0,0 +1,47 @@
################################################################################
# twin-style-mallory #
# ------------------ #
# This file is licensed under the terms of GNU GPL v3 or later. #
# Improvements and feedback are welcome. #
################################################################################
project(twin-style-mallory)
### Includes ###################################################################
include(FindPkgConfig)
include(CheckFunctionExists)
include(CheckSymbolExists)
include(CheckIncludeFile)
include(CheckLibraryExists)
include(CheckCSourceCompiles)
include(CheckCXXSourceCompiles)
include(TDEMacros)
include(TDESetupPaths)
include(TDEVersion)
### Basic project setup ########################################################
cmake_minimum_required(VERSION ${TDE_CMAKE_MINIMUM_VERSION})
tde_set_project_version()
tde_setup_paths()
### Options ####################################################################
option(WITH_ALL_OPTIONS "Enable all optional support" OFF)
option(WITH_GCC_VISIBILITY "Enable GCC visibility" ${WITH_ALL_OPTIONS})
### Components #################################################################
option(BUILD_ALL "Build all" ON)
option(BUILD_COLORSCHEMES "Install colorschemes" ${BUILD_ALL})
option(BUILD_TCC_MODULE "Build Control Centre module" ${BUILD_ALL})
option(BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL})
### Configuration ##############################################################
include(ConfigureChecks.cmake)
configure_file(config.h.cmake config.h @ONLY)
### Subdirectories #############################################################
add_subdirectory(malloryclient)
tde_conditional_add_subdirectory(BUILD_COLORSCHEMES colorscheme)
# tde_conditional_add_project_translations()
# kate: indent-width 2; replace-tabs true;

@ -0,0 +1,21 @@
################################################################################
# twin-style-mallory #
# ------------------ #
# This file is licensed under the terms of GNU GPL v3 or later. #
# Improvements and feedback are welcome. #
################################################################################
### TQt/TDE ####################################################################
find_package(TQt)
find_package(TDE)
tde_setup_architecture_flags()
tde_setup_largefiles()
### Big Endian #################################################################
include(TestBigEndian)
test_big_endian(WORDS_BIGENDIAN)
### GCC visibility #############################################################
if (WITH_GCC_VISIBILITY)
tde_setup_gcc_visibility()
endif()

@ -1,733 +0,0 @@
# Makefile.in generated by automake 1.6.3 from Makefile.am.
# Generated automatically from Makefile.in by config.pl.
# KDE tags expanded automatically by am_edit - $Revision: 1.373 $
#
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
VPATH = .
prefix = /opt/kde3
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
pkgdatadir = $(datadir)/mallory
pkglibdir = $(libdir)/mallory
pkgincludedir = $(includedir)/mallory
top_builddir = .
ACLOCAL = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6
AUTOCONF = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf
AUTOMAKE = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6
AUTOHEADER = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c -p
INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG)
INSTALL_DATA = ${INSTALL} -m 644
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = ${INSTALL}
INSTALL_HEADER = $(INSTALL_DATA)
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias =
build_triplet = i686-pc-linux-gnu
host_alias =
host_triplet = i686-pc-linux-gnu
target_alias =
target_triplet = i686-pc-linux-gnu
EXEEXT =
OBJEXT = o
PATH_SEPARATOR = :
AMTAR = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar
ARTSCCONFIG = /opt/kde3/bin/artsc-config
AS = @AS@
AUTODIRS =
AWK = gawk
BROCKENBORING =
CC = gcc
CONF_FILES = $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in
CPP = gcc -E
CXX = g++
CXXCPP = g++ -E
DCOPIDL = /opt/kde3/bin/dcopidl
DCOPIDL2CPP = /opt/kde3/bin/dcopidl2cpp
DCOP_DEPENDENCIES = $(DCOPIDL)
DEPDIR = .deps
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@
DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@
DPMSINC = @DPMSINC@
DPMSLIB = @DPMSLIB@
ECHO = echo
FRAMEWORK_COREAUDIO =
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMSGFMT = /usr/bin/msgfmt
IDL = @IDL@
IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
JAR = @JAR@
JAVAC = @JAVAC@
JAVAH = @JAVAH@
JVMLIBS = @JVMLIBS@
KDECONFIG = /opt/kde3/bin/tde-config
KDE_EXTRA_RPATH =
KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@
KDE_HAVE_DOT = @KDE_HAVE_DOT@
KDE_INCLUDES = -I/opt/kde3/include
KDE_LDFLAGS = -L/opt/kde3/lib
KDE_MT_LDFLAGS =
KDE_MT_LIBS = -lpthread
KDE_NO_UNDEFINED =
KDE_PLUGIN = -avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS)
KDE_RPATH = -R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries)
KDE_USE_CLOSURE_FALSE = #
KDE_USE_CLOSURE_TRUE =
KDE_USE_FINAL_FALSE =
KDE_USE_FINAL_TRUE = #
KDE_USE_NMCHECK_FALSE =
KDE_USE_NMCHECK_TRUE = #
KDE_XSL_STYLESHEET = /opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBBZ2 = @LIBBZ2@
LIBCOMPAT =
LIBCRYPT = -lcrypt
LIBDL = -ldl
LIBGEN = @LIBGEN@
LIBJPEG = -ljpeg
LIBMICO = @LIBMICO@
LIBOBJS =
LIBPNG = -lpng -lz -lm
LIBPTHREAD = -lpthread
LIBPYTHON = @LIBPYTHON@
LIBQIMGIO = @LIBQIMGIO@
LIBRESOLV = -lresolv
LIBSHADOW = @LIBSHADOW@
LIBSM = -lSM -lICE
LIBSOCKET =
LIBSSL = @LIBSSL@
LIBTIFF = @LIBTIFF@
LIBTOOL = $(SHELL) $(top_builddir)/libtool --silent
LIBUCB =
LIBUTIL = -lutil
LIBZ = -lz
LIB_JASPER = @LIB_JASPER@
LIB_KAB = -lkab
LIB_KABC = -ltdeabc
LIB_TDECORE = -ltdecore
LIB_TDEPRINT = -ltdeprint
LIB_TDEUI = -ltdeui
LIB_KFILE = -ltdeio
LIB_KFM =
LIB_TDEHTML = -ltdehtml
LIB_KIMGIO = @LIB_KIMGIO@
LIB_TDEIO = -ltdeio
LIB_TDEPARTS = -ltdeparts
LIB_TDESPELL = -ltdespell
LIB_TDESYCOCA = -ltdeio
LIB_POLL =
LIB_QPE =
LIB_QT = -ltqt-mt $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread
LIB_QTOPIA = @LIB_QTOPIA@
LIB_SMB = -lsmb
LIB_X11 = -lX11 $(LIBSOCKET)
LIB_XEXT = -lXext
LN_S = ln -s
MCOPIDL = /opt/kde3/bin/mcopidl
MEINPROC = /opt/kde3/bin/meinproc
MICO_INCLUDES = @MICO_INCLUDES@
MICO_LDFLAGS = @MICO_LDFLAGS@
MOC = /usr/lib/qt3/bin/moc
MSGFMT = /usr/bin/msgfmt
NOOPT_CFLAGS = -O0
NOOPT_CXXFLAGS = -O0
OBJC = @OBJC@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
PACKAGE = mallory
PAMLIBS = @PAMLIBS@
PASSWDLIBS = @PASSWDLIBS@
PYTHONINC = @PYTHONINC@
PYTHONLIB = @PYTHONLIB@
PYTHONMODDIR = @PYTHONMODDIR@
QTDOCDIR = @QTDOCDIR@
QTE_NORTTI =
QTOPIA_INCLUDES = @QTOPIA_INCLUDES@
QT_INCLUDES = -I/usr/lib/qt3/include
QT_LDFLAGS = -L/usr/lib/qt3/lib
RANLIB = ranlib
RC = @RC@
SETUIDFLAGS = @SETUIDFLAGS@
SSL_INCLUDES = @SSL_INCLUDES@
SSL_LDFLAGS = @SSL_LDFLAGS@
STRIP = strip
TOPSUBDIRS = colorscheme malloryclient
UIC = /usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload
UIC_TR = tr2i18n
USER_INCLUDES =
USER_LDFLAGS =
USE_EXCEPTIONS = -fexceptions
USE_RTTI =
USE_THREADS =
VERSION = 1.0
WOVERLOADED_VIRTUAL =
XGETTEXT = /usr/bin/xgettext
XPMINC = @XPMINC@
XPMLIB = @XPMLIB@
X_EXTRA_LIBS =
X_INCLUDES = -I/usr/X11R6/include
X_LDFLAGS = -L/usr/X11R6/lib
X_PRE_LIBS =
X_RPATH = -R $(x_libraries)
all_includes = -I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include
all_libraries = -L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib
am__include = include
am__quote =
idldir = @idldir@
install_sh = /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh
jni_includes = @jni_includes@
kde_appsdir = ${prefix}/share/applnk
kde_bindir = ${exec_prefix}/bin
kde_confdir = ${prefix}/share/config
kde_datadir = ${prefix}/share/apps
kde_htmldir = ${prefix}/share/doc/HTML
kde_icondir = ${prefix}/share/icons
kde_includes = /opt/kde3/include
kde_libraries = /opt/kde3/lib
kde_libs_htmldir = /opt/kde3/share/doc/HTML
kde_libs_prefix = /opt/kde3
kde_locale = ${prefix}/share/locale
kde_mimedir = ${prefix}/share/mimelnk
kde_moduledir = ${libdir}/kde3
kde_qtver = 3
kde_servicesdir = ${prefix}/share/services
kde_servicetypesdir = ${prefix}/share/servicetypes
kde_sounddir = ${prefix}/share/sounds
kde_styledir = ${libdir}/kde3/plugins/styles
kde_templatesdir = ${prefix}/share/templates
kde_wallpaperdir = ${prefix}/share/wallpapers
kde_widgetdir = /opt/kde3/lib/kde3/plugins/designer
tdeinitdir = $(kde_moduledir)
micodir = @micodir@
qt_includes = /usr/lib/qt3/include
qt_libraries = /usr/lib/qt3/lib
x_includes = /usr/X11R6/include
x_libraries = /usr/X11R6/lib
xdg_appsdir = ${datadir}/applications
xdg_directorydir = ${datadir}/desktop-directories
SUBDIRS = malloryclient colorscheme
EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO
# not a GNU package. You can remove this line, if
# have all needed files, that a GNU package needs
AUTOMAKE_OPTIONS = foreign dist-bzip2
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
#>- uninstall-info-recursive all-recursive install-data-recursive \
#>- install-exec-recursive installdirs-recursive install-recursive \
#>- uninstall-recursive check-recursive installcheck-recursive
#>+ 4
#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
#>- uninstall-info-recursive all-recursive install-data-recursive \
#>- install-exec-recursive installdirs-recursive install-recursive \
#>- uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive
#>+ 4
RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
uninstall-info-recursive all-recursive install-data-recursive \
install-exec-recursive installdirs-recursive install-recursive \
uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive
DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
Makefile.in TODO acinclude.m4 aclocal.m4 admin/compile \
admin/config.guess admin/config.sub admin/depcomp \
admin/install-sh admin/ltmain.sh admin/missing \
admin/mkinstalldirs admin/ylwrap config.h.in configure \
configure.in
DIST_SUBDIRS = $(SUBDIRS)
#>- all: config.h
#>+ 1
all: docs-am config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
#>- cd $(top_srcdir) && \
#>- $(AUTOMAKE) --foreign Makefile
#>+ 3
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
#>- cd $(srcdir) && $(AUTOCONF)
#>+ 1
cd $(srcdir) && rm -f configure && $(MAKE) -f admin/Makefile.common configure
$(ACLOCAL_M4): configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOHEADER)
touch $(srcdir)/config.h.in
distclean-hdr:
-rm -f config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ETAGS = etags
ETAGSFLAGS =
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 4
KDE_DIST=stamp-h.in subdirs configure.files Makefile.dist configure.in.in
DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
top_distdir = .
distdir = $(PACKAGE)-$(VERSION)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
GZIP_ENV = --best
distcleancheck_listfiles = find . -type f -print
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkinstalldirs) $(distdir)/admin
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" \
distdir=../$(distdir)/$$subdir \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="${top_distdir}" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
$(am__remove_distdir)
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
&& cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
find $$dc_install_base -type f -print ; \
exit 1; } >&2 ) \
&& $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
&& rm -f $(distdir).tar.gz \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@echo "$(distdir).tar.gz is ready for distribution" | \
sed 'h;s/./=/g;p;x;p;x'
distcleancheck: distclean
if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean clean-recursive
#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
info: info-recursive
info-am:
install-data-am:
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
uninstall-am: uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
clean-generic clean-libtool clean-recursive dist dist-all \
dist-bzip2 dist-gzip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-recursive \
distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \
info info-am info-recursive install install-am install-data \
install-data-am install-data-recursive install-exec \
install-exec-am install-exec-recursive install-info \
install-info-am install-info-recursive install-man \
install-recursive install-strip installcheck installcheck-am \
installdirs installdirs-am installdirs-recursive \
maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-generic \
mostlyclean-libtool mostlyclean-recursive tags tags-recursive \
uninstall uninstall-am uninstall-info-am \
uninstall-info-recursive uninstall-recursive
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
package-messages:
$(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
#_SOURCES = malloryclient.h malloryclient.cpp
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#>+ 2
docs-am:
#>+ 6
force-reedit:
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in
#>+ 20
clean-bcheck:
rm -f *.bchecktest.cc *.bchecktest.cc.class
bcheck: bcheck-recursive
bcheck-am:
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
fi ; \
done
#>+ 2
final:
$(MAKE) all-am
#>+ 2
final-install:
$(MAKE) install-am
#>+ 2
no-final:
$(MAKE) all-am
#>+ 2
no-final-install:
$(MAKE) install-am
#>+ 3
cvs-clean:
$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
#>+ 3
nmcheck:
nmcheck-am: nmcheck

@ -1,27 +0,0 @@
SUBDIRS = malloryclient colorscheme
EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO
# not a GNU package. You can remove this line, if
# have all needed files, that a GNU package needs
AUTOMAKE_OPTIONS = foreign dist-bzip2
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
package-messages:
$(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
#_SOURCES = malloryclient.h malloryclient.cpp

@ -1,14 +0,0 @@
all:
@echo "This Makefile is only for the CVS repository"
@echo ""
@if test ! -d admin; then \
echo "Please recheckout this module!" ;\
echo "for cvs: use checkout once and after that update again" ;\
echo "for cvsup: checkout kde-common from cvsup and" ;\
echo " link kde-common/admin to ./admin" ;\
exit 1 ;\
fi
$(MAKE) -f admin/Makefile.common cvs
.SILENT:

@ -1,732 +0,0 @@
# Makefile.in generated by automake 1.6.3 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.373 $
# @configure_input@
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
ARTSCCONFIG = @ARTSCCONFIG@
AS = @AS@
AUTODIRS = @AUTODIRS@
AWK = @AWK@
BROCKENBORING = @BROCKENBORING@
CC = @CC@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CXX = @CXX@
CXXCPP = @CXXCPP@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@
DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@
DPMSINC = @DPMSINC@
DPMSLIB = @DPMSLIB@
ECHO = @ECHO@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMSGFMT = @GMSGFMT@
IDL = @IDL@
IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JAR = @JAR@
JAVAC = @JAVAC@
JAVAH = @JAVAH@
JVMLIBS = @JVMLIBS@
KDECONFIG = @KDECONFIG@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@
KDE_HAVE_DOT = @KDE_HAVE_DOT@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
KDE_MT_LIBS = @KDE_MT_LIBS@
KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBBZ2 = @LIBBZ2@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBGEN = @LIBGEN@
LIBJPEG = @LIBJPEG@
LIBMICO = @LIBMICO@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBPYTHON = @LIBPYTHON@
LIBQIMGIO = @LIBQIMGIO@
LIBRESOLV = @LIBRESOLV@
LIBSHADOW = @LIBSHADOW@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBSSL = @LIBSSL@
LIBTIFF = @LIBTIFF@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBZ = @LIBZ@
LIB_JASPER = @LIB_JASPER@
LIB_KAB = @LIB_KAB@
LIB_KABC = @LIB_KABC@
LIB_TDECORE = @LIB_TDECORE@
LIB_TDEPRINT = @LIB_TDEPRINT@
LIB_TDEUI = @LIB_TDEUI@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_TDEHTML = @LIB_TDEHTML@
LIB_KIMGIO = @LIB_KIMGIO@
LIB_TDEIO = @LIB_TDEIO@
LIB_TDEPARTS = @LIB_TDEPARTS@
LIB_TDESPELL = @LIB_TDESPELL@
LIB_TDESYCOCA = @LIB_TDESYCOCA@
LIB_POLL = @LIB_POLL@
LIB_QPE = @LIB_QPE@
LIB_QT = @LIB_QT@
LIB_QTOPIA = @LIB_QTOPIA@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LIB_XEXT = @LIB_XEXT@
LN_S = @LN_S@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MICO_INCLUDES = @MICO_INCLUDES@
MICO_LDFLAGS = @MICO_LDFLAGS@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJC = @OBJC@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
PAMLIBS = @PAMLIBS@
PASSWDLIBS = @PASSWDLIBS@
PYTHONINC = @PYTHONINC@
PYTHONLIB = @PYTHONLIB@
PYTHONMODDIR = @PYTHONMODDIR@
QTDOCDIR = @QTDOCDIR@
QTE_NORTTI = @QTE_NORTTI@
QTOPIA_INCLUDES = @QTOPIA_INCLUDES@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
RC = @RC@
SETUIDFLAGS = @SETUIDFLAGS@
SSL_INCLUDES = @SSL_INCLUDES@
SSL_LDFLAGS = @SSL_LDFLAGS@
STRIP = @STRIP@
TOPSUBDIRS = @TOPSUBDIRS@
UIC = @UIC@
UIC_TR = @UIC_TR@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
XPMINC = @XPMINC@
XPMLIB = @XPMLIB@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
all_includes = @all_includes@
all_libraries = @all_libraries@
am__include = @am__include@
am__quote = @am__quote@
idldir = @idldir@
install_sh = @install_sh@
jni_includes = @jni_includes@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_qtver = @kde_qtver@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_styledir = @kde_styledir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
tdeinitdir = @tdeinitdir@
micodir = @micodir@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
xdg_directorydir = @xdg_directorydir@
SUBDIRS = malloryclient colorscheme
EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO
# not a GNU package. You can remove this line, if
# have all needed files, that a GNU package needs
AUTOMAKE_OPTIONS = foreign dist-bzip2
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
#>- uninstall-info-recursive all-recursive install-data-recursive \
#>- install-exec-recursive installdirs-recursive install-recursive \
#>- uninstall-recursive check-recursive installcheck-recursive
#>+ 4
#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
#>- uninstall-info-recursive all-recursive install-data-recursive \
#>- install-exec-recursive installdirs-recursive install-recursive \
#>- uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive
#>+ 4
RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
uninstall-info-recursive all-recursive install-data-recursive \
install-exec-recursive installdirs-recursive install-recursive \
uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive
DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
Makefile.in TODO acinclude.m4 aclocal.m4 admin/compile \
admin/config.guess admin/config.sub admin/depcomp \
admin/install-sh admin/ltmain.sh admin/missing \
admin/mkinstalldirs admin/ylwrap config.h.in configure \
configure.in
DIST_SUBDIRS = $(SUBDIRS)
#>- all: config.h
#>+ 1
all: docs-am config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
#>- cd $(top_srcdir) && \
#>- $(AUTOMAKE) --foreign Makefile
#>+ 3
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
#>- cd $(srcdir) && $(AUTOCONF)
#>+ 1
cd $(srcdir) && rm -f configure && $(MAKE) -f admin/Makefile.common configure
$(ACLOCAL_M4): configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOHEADER)
touch $(srcdir)/config.h.in
distclean-hdr:
-rm -f config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ETAGS = etags
ETAGSFLAGS =
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 4
KDE_DIST=stamp-h.in subdirs configure.files Makefile.dist configure.in.in
DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
top_distdir = .
distdir = $(PACKAGE)-$(VERSION)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
GZIP_ENV = --best
distcleancheck_listfiles = find . -type f -print
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkinstalldirs) $(distdir)/admin
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" \
distdir=../$(distdir)/$$subdir \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="${top_distdir}" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
$(am__remove_distdir)
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
&& cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
find $$dc_install_base -type f -print ; \
exit 1; } >&2 ) \
&& $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
&& rm -f $(distdir).tar.gz \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@echo "$(distdir).tar.gz is ready for distribution" | \
sed 'h;s/./=/g;p;x;p;x'
distcleancheck: distclean
if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean clean-recursive
#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
info: info-recursive
info-am:
install-data-am:
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
uninstall-am: uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
clean-generic clean-libtool clean-recursive dist dist-all \
dist-bzip2 dist-gzip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-recursive \
distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \
info info-am info-recursive install install-am install-data \
install-data-am install-data-recursive install-exec \
install-exec-am install-exec-recursive install-info \
install-info-am install-info-recursive install-man \
install-recursive install-strip installcheck installcheck-am \
installdirs installdirs-am installdirs-recursive \
maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-generic \
mostlyclean-libtool mostlyclean-recursive tags tags-recursive \
uninstall uninstall-am uninstall-info-am \
uninstall-info-recursive uninstall-recursive
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
package-messages:
$(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
#_SOURCES = malloryclient.h malloryclient.cpp
# Tell versions [3.59,3.63) of GNU make to not export all variables.